From: Jaehoon Chung <jh80.chung@samsung.com>
To: Girish K S <girish.shivananjappa@linaro.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>,
linux-mmc@vger.kernel.org, patches@linaro.org,
linux-samsung-soc@vger.kernel.org, Chris Ball <cjb@laptop.org>,
Seungwon Jeon <tgih.jun@samsung.com>
Subject: Re: [PATCH V9] mmc: core: Add Power Off Notify Feature eMMC 4.5
Date: Tue, 18 Oct 2011 14:37:06 +0900 [thread overview]
Message-ID: <4E9D1082.2080006@samsung.com> (raw)
In-Reply-To: <CAGxe1ZGgyd+URx4CjgVGqarKaYx-X2U025Q75Qo540bF=2C0QA@mail.gmail.com>
Hi Girish.
I know you're worked based-on latest mmc-next.
But this patch is already merged on mmc-next...
Merged patch is already included #define MMC_CAP2_CACHE_CTRL and EXT_CSD_FLUSH_CACHE.
So i didn't add them in [mmc: core: Add cache control for eMMC4.5 device] on the below repository
git://git.infradead.org/users/kmpark/linux-2.6-samsung emmc4.5
What do you want how i do? :)
Best regards,
Jaehoon Chung
On 10/18/2011 02:25 PM, Girish K S wrote:
> On 18 October 2011 10:49, Girish K S <girish.shivananjappa@linaro.org> wrote:
>> On 18 October 2011 10:46, Jaehoon Chung <jh80.chung@samsung.com> wrote:
>>> Hi Girish.
>>>
>>> This patch is merged on mmc-next..did you know that?
>>> And if deleted commit id bd3151f6c55c553bed2c0df72792841457b75bb5,
>>> I will re-work for eMMC feature4.5.
>>> git://git.infradead.org/users/kmpark/linux-2.6-samsung emmc4.5
>>>
>>> To Chris.
>>> If you re-commit this patch, i also change "git pull request".
>>> there are duplicated code in Notify patch, so i didn't add to cache patch.
>>> HI Jaehoon,
>> I have already bought it to the notice of Chris. After discussing
>> with Chris i am resending the complete patch.
>>> Regards,
>>> Jaehoon Chung
>>> Adding to it. In your mail with subject "[GIT PULL v2] Add eMMC4.5 feature for v3.2", for version 2 changes it is mentioned
> that power notify feature is removed. Thats the reason i rebased my
> patch to Chris's mmc-next branch and resent.
>>> On 10/18/2011 02:05 PM, Girish K S wrote:
>>>
>>>> This patch adds the support for power off notify feature, available in
>>>> eMMC 4.5 devices. If the the host has support for this feature, then the
>>>> mmc core will notify it to the device by setting the POWER_OFF_NOTIFICATION
>>>> byte in the extended csd register with a value 1(POWER_ON).
>>>>
>>>> For suspend mode short timeout is used, whereas for the normal poweroff long
>>>> timeout is used.
>>>>
>>>> cc: Chris Ball <cjb@laptop.org>
>>>> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
>>>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>>>> ---
>>>> Changes in V9:
>>>> Removed the macros not related with the PowerOff notify feature.
>>>> The previous patch with commit id
>>>> bd3151f6c55c553bed2c0df72792841457b75bb5 should be deleted before
>>>> applying this patch.
>>>> Changes in V8:
>>>> Updated with review comments of Chris Ball and rebased to
>>>> chris-mmc/mmc-next branch.
>>>> Changes in V7:
>>>> Rebased to chris-mmc/mmc-next branch. merged to patches to single
>>>> patch.
>>>> Changes in V6:
>>>> Fixes checkpatch errors. The patches are generated after rebasing to
>>>> chris's mmc-next branch.
>>>> Changes in V5:
>>>> This patch version fixes the problem with power off notify function,
>>>> when called for the first time and card is not yet initialised.
>>>> Changes in V4:
>>>> Updated with review comments of Jeon
>>>> Changes in V2:
>>>> Adds poweroff notification handling in suspend/normal.
>>>>
>>>> drivers/mmc/core/core.c | 34 ++++++++++++++++++++++++++++++++++
>>>> drivers/mmc/core/mmc.c | 23 +++++++++++++++++++++--
>>>> drivers/mmc/host/sdhci.c | 9 +++++++++
>>>> include/linux/mmc/card.h | 6 ++++++
>>>> include/linux/mmc/host.h | 5 +++++
>>>> include/linux/mmc/mmc.h | 6 ++++++
>>>> 6 files changed, 81 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>>>> index 61d7730..b1eca96 100644
>>>> --- a/drivers/mmc/core/core.c
>>>> +++ b/drivers/mmc/core/core.c
>>>> @@ -1212,11 +1212,43 @@ static void mmc_power_up(struct mmc_host *host)
>>>>
>>>> void mmc_power_off(struct mmc_host *host)
>>>> {
>>>> + struct mmc_card *card;
>>>> + unsigned int notify_type;
>>>> + unsigned int timeout;
>>>> + int err;
>>>> +
>>>> mmc_host_clk_hold(host);
>>>>
>>>> + card = host->card;
>>>> host->ios.clock = 0;
>>>> host->ios.vdd = 0;
>>>>
>>>> + if (card && mmc_card_mmc(card) &&
>>>> + card->poweroff_notify_state == MMC_POWERED_ON) {
>>>> +
>>>> + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
>>>> + notify_type = EXT_CSD_POWER_OFF_SHORT;
>>>> + timeout = card->ext_csd.generic_cmd6_time;
>>>> + card->poweroff_notify_state = MMC_POWEROFF_SHORT;
>>>> + } else {
>>>> + notify_type = EXT_CSD_POWER_OFF_LONG;
>>>> + timeout = card->ext_csd.power_off_longtime;
>>>> + card->poweroff_notify_state = MMC_POWEROFF_LONG;
>>>> + }
>>>> +
>>>> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>>>> + EXT_CSD_POWER_OFF_NOTIFICATION,
>>>> + notify_type, timeout);
>>>> +
>>>> + if (err && err != -EBADMSG)
>>>> + pr_err("Device failed to respond within %d poweroff "
>>>> + "time. Forcefully powering down the device\n",
>>>> + timeout);
>>>> +
>>>> + /* Set the card state to no notification after the poweroff */
>>>> + card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
>>>> + }
>>>> +
>>>> /*
>>>> * Reset ocr mask to be the highest possible voltage supported for
>>>> * this mmc host. This value will be used at next power up.
>>>> @@ -2208,6 +2240,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>>>>
>>>> spin_lock_irqsave(&host->lock, flags);
>>>> host->rescan_disable = 1;
>>>> + host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
>>>> spin_unlock_irqrestore(&host->lock, flags);
>>>> cancel_delayed_work_sync(&host->detect);
>>>>
>>>> @@ -2231,6 +2264,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>>>>
>>>> spin_lock_irqsave(&host->lock, flags);
>>>> host->rescan_disable = 0;
>>>> + host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG;
>>>> spin_unlock_irqrestore(&host->lock, flags);
>>>> mmc_detect_change(host, 0);
>>>>
>>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>>>> index 4e869d3..f8ea938 100644
>>>> --- a/drivers/mmc/core/mmc.c
>>>> +++ b/drivers/mmc/core/mmc.c
>>>> @@ -458,10 +458,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
>>>> else
>>>> card->erased_byte = 0x0;
>>>>
>>>> - if (card->ext_csd.rev >= 6)
>>>> + if (card->ext_csd.rev >= 6) {
>>>> card->ext_csd.generic_cmd6_time = 10 *
>>>> ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
>>>> - else
>>>> + card->ext_csd.power_off_longtime = 10 *
>>>> + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME];
>>>> + } else
>>>> card->ext_csd.generic_cmd6_time = 0;
>>>>
>>>> out:
>>>> @@ -846,6 +848,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>>>> }
>>>>
>>>> /*
>>>> + * If the host supports the power_off_notify capability then
>>>> + * set the notification byte in the ext_csd register of device
>>>> + */
>>>> + if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&
>>>> + (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) {
>>>> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>>>> + EXT_CSD_POWER_OFF_NOTIFICATION,
>>>> + EXT_CSD_POWER_ON,
>>>> + card->ext_csd.generic_cmd6_time);
>>>> + if (err && err != -EBADMSG)
>>>> + goto free_card;
>>>> + }
>>>> +
>>>> + if (!err)
>>>> + card->poweroff_notify_state = MMC_POWERED_ON;
>>>> +
>>>> + /*
>>>> * Activate high speed (if supported)
>>>> */
>>>> if ((card->ext_csd.hs_max_dtr != 0) &&
>>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>>> index 2cc3ffa..91fdaed 100644
>>>> --- a/drivers/mmc/host/sdhci.c
>>>> +++ b/drivers/mmc/host/sdhci.c
>>>> @@ -2739,6 +2739,15 @@ int sdhci_add_host(struct sdhci_host *host)
>>>> if (caps[1] & SDHCI_DRIVER_TYPE_D)
>>>> mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
>>>>
>>>> + /*
>>>> + * If Notify capability is enabled by the host, set notify to
>>>> + * short power off notify timeout value.
>>>> + */
>>>> + if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY)
>>>> + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
>>>> + else
>>>> + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE;
>>>> +
>>>> /* Initial value for re-tuning timer count */
>>>> host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
>>>> SDHCI_RETUNING_TIMER_COUNT_SHIFT;
>>>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>>>> index 30d493c..fce88b3 100644
>>>> --- a/include/linux/mmc/card.h
>>>> +++ b/include/linux/mmc/card.h
>>>> @@ -54,6 +54,7 @@ struct mmc_ext_csd {
>>>> unsigned int part_time; /* Units: ms */
>>>> unsigned int sa_timeout; /* Units: 100ns */
>>>> unsigned int generic_cmd6_time; /* Units: 10ms */
>>>> + unsigned int power_off_longtime; /* Units: ms */
>>>> unsigned int hs_max_dtr;
>>>> unsigned int sectors;
>>>> unsigned int card_type;
>>>> @@ -209,6 +210,11 @@ struct mmc_card {
>>>> #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
>>>> #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
>>>> /* byte mode */
>>>> + unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
>>>> +#define MMC_NO_POWER_NOTIFICATION 0
>>>> +#define MMC_POWERED_ON 1
>>>> +#define MMC_POWEROFF_SHORT 2
>>>> +#define MMC_POWEROFF_LONG 3
>>>>
>>>> unsigned int erase_size; /* erase size in sectors */
>>>> unsigned int erase_shift; /* if erase unit is power 2 */
>>>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>>>> index aed5bc7..07c0abf 100644
>>>> --- a/include/linux/mmc/host.h
>>>> +++ b/include/linux/mmc/host.h
>>>> @@ -239,8 +239,13 @@ struct mmc_host {
>>>> unsigned int caps2; /* More host capabilities */
>>>>
>>>> #define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */
>>>> +#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */
>>>>
>>>> mmc_pm_flag_t pm_caps; /* supported pm features */
>>>> + unsigned int power_notify_type;
>>>> +#define MMC_HOST_PW_NOTIFY_NONE 0
>>>> +#define MMC_HOST_PW_NOTIFY_SHORT 1
>>>> +#define MMC_HOST_PW_NOTIFY_LONG 2
>>>>
>>>> #ifdef CONFIG_MMC_CLKGATE
>>>> int clk_requests; /* internal reference counter */
>>>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>>>> index cd63c2d..8b0e0a7 100644
>>>> --- a/include/linux/mmc/mmc.h
>>>> +++ b/include/linux/mmc/mmc.h
>>>> @@ -271,6 +271,7 @@ struct _mmc_csd {
>>>> */
>>>>
>>>> #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
>>>> +#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
>>>> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
>>>> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
>>>> #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
>>>> @@ -346,6 +347,11 @@ struct _mmc_csd {
>>>> #define EXT_CSD_RST_N_EN_MASK 0x3
>>>> #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
>>>>
>>>> +#define EXT_CSD_NO_POWER_NOTIFICATION 0
>>>> +#define EXT_CSD_POWER_ON 1
>>>> +#define EXT_CSD_POWER_OFF_SHORT 2
>>>> +#define EXT_CSD_POWER_OFF_LONG 3
>>>> +
>>>> #define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
>>>> #define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
>>>> #define EXT_CSD_PWR_CL_8BIT_SHIFT 4
>>>
>>>
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2011-10-18 5:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-18 5:05 [PATCH V9] mmc: core: Add Power Off Notify Feature eMMC 4.5 Girish K S
2011-10-18 5:16 ` Jaehoon Chung
2011-10-18 5:19 ` Girish K S
2011-10-18 5:25 ` Girish K S
2011-10-18 5:37 ` Jaehoon Chung [this message]
2011-10-18 5:48 ` Girish K S
2011-10-18 5:47 ` Chris Ball
2011-10-18 5:57 ` Girish K S
2011-10-18 12:53 ` Chris Ball
2011-10-19 1:50 ` Jaehoon Chung
2011-11-08 9:48 ` Sahitya Tummala
2011-11-10 5:54 ` Girish K S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9D1082.2080006@samsung.com \
--to=jh80.chung@samsung.com \
--cc=cjb@laptop.org \
--cc=girish.shivananjappa@linaro.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=tgih.jun@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox