From: Adrian Hunter <adrian.hunter@intel.com>
To: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mmc@vger.kernel.org, Chris Ball <cjb@laptop.org>
Subject: Re: [PATCH] mmc: sdhci-pci: move suspend/resume hooks to dev_pm_ops
Date: Wed, 02 Nov 2011 12:09:12 +0200 [thread overview]
Message-ID: <4EB116C8.3060207@intel.com> (raw)
In-Reply-To: <4EB11137.4090404@intel.com>
On 02/11/11 11:45, Adrian Hunter wrote:
> On 01/11/11 14:34, Manuel Lauss wrote:
>> Move suspend/resume/freeze/thaw hooks from struct pci_driver to dev_pm_ops,
>> mainly to shut up the driver cores' complaints about this driver using
>> both new and legacy PM methods.
>
> Thanks for picking up on this
Also use to_pci_dev(dev) instead of container_of(dev, struct pci_dev, dev)
>
>>
>> Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
>> ---
>> I've only tested suspend to ram, but it works.
>>
>> drivers/mmc/host/sdhci-pci.c | 24 ++++++++++++++++++++----
>> 1 files changed, 20 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
>> index d833d9c..53bfbe7 100644
>> --- a/drivers/mmc/host/sdhci-pci.c
>> +++ b/drivers/mmc/host/sdhci-pci.c
>> @@ -993,7 +993,7 @@ static struct sdhci_ops sdhci_pci_ops = {
>>
>> #ifdef CONFIG_PM
>>
>> -static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state)
>> +static int sdhci_pci_do_suspend(struct pci_dev *pdev, pm_message_t state)
>> {
>> struct sdhci_pci_chip *chip;
>> struct sdhci_pci_slot *slot;
>> @@ -1050,8 +1050,9 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state)
>> return 0;
>> }
>>
>> -static int sdhci_pci_resume(struct pci_dev *pdev)
>> +static int sdhci_pci_resume(struct device *dev)
>> {
>> + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
>> struct sdhci_pci_chip *chip;
>> struct sdhci_pci_slot *slot;
>> int i, ret;
>> @@ -1085,9 +1086,22 @@ static int sdhci_pci_resume(struct pci_dev *pdev)
>> return 0;
>> }
>>
>> +static int sdhci_pci_suspend(struct device *dev)
>> +{
>> + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
>> + return sdhci_pci_do_suspend(pdev, PMSG_SUSPEND);
>
> We need to get rid of state entirely. Unfortunately that means
> changing sdhci_suspend_host() and all callers
>
>> +}
>> +
>> +static int sdhci_pci_freeze(struct device *dev)
>> +{
>> + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
>> + return sdhci_pci_do_suspend(pdev, PMSG_FREEZE);
>> +}
>> +
>> #else /* CONFIG_PM */
>>
>> #define sdhci_pci_suspend NULL
>> +#define sdhci_pci_freeze NULL
>> #define sdhci_pci_resume NULL
>>
>> #endif /* CONFIG_PM */
>> @@ -1176,6 +1190,10 @@ static int sdhci_pci_runtime_idle(struct device *dev)
>> #endif
>>
>> static const struct dev_pm_ops sdhci_pci_pm_ops = {
>> + .suspend = sdhci_pci_suspend,
>> + .freeze = sdhci_pci_freeze,
>> + .resume = sdhci_pci_resume,
>> + .thaw = sdhci_pci_resume,
>
> freeze and thaw are not needed
>
>> .runtime_suspend = sdhci_pci_runtime_suspend,
>> .runtime_resume = sdhci_pci_runtime_resume,
>> .runtime_idle = sdhci_pci_runtime_idle,
>> @@ -1428,8 +1446,6 @@ static struct pci_driver sdhci_driver = {
>> .id_table = pci_ids,
>> .probe = sdhci_pci_probe,
>> .remove = __devexit_p(sdhci_pci_remove),
>> - .suspend = sdhci_pci_suspend,
>> - .resume = sdhci_pci_resume,
>> .driver = {
>> .pm = &sdhci_pci_pm_ops
>> },
>
>
next prev parent reply other threads:[~2011-11-02 10:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-01 12:34 [PATCH] mmc: sdhci-pci: move suspend/resume hooks to dev_pm_ops Manuel Lauss
2011-11-02 9:45 ` Adrian Hunter
2011-11-02 10:09 ` Adrian Hunter [this message]
2011-11-02 11:12 ` Manuel Lauss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB116C8.3060207@intel.com \
--to=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=manuel.lauss@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox