From: James Hogan <james.hogan@imgtec.com>
To: Shashidhar Hiremath <shashidharh@vayavyalabs.com>
Cc: Chris Ball <cjb@laptop.org>, Shawn Guo <shawn.guo@linaro.org>,
Philip Rakity <prakity@marvell.com>,
Wolfram Sang <w.sang@pengutronix.de>,
Will Newton <will.newton@imgtec.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
linux-mmc@vger.kernel.org
Subject: Re: [PATCH v5 1/1] mmc:Support of PCI mode for the dw_mmc driver
Date: Thu, 1 Dec 2011 09:46:39 +0000 [thread overview]
Message-ID: <4ED74CFF.80705@imgtec.com> (raw)
In-Reply-To: <1322732488-21633-1-git-send-email-shashidharh@vayavyalabs.com>
On 12/01/2011 09:41 AM, Shashidhar Hiremath wrote:
> Please forgive me for repetative patches.Some mailing addresses were wrong.
> So, resending the patch.
> Support of PCI mode for the dw_mmc driver. This Patch adds the
> support for the scenario where the Synopsys Designware IP
> is present on the PCI bus. The patch adds the minimal modifications
> necessary for the driver to work on PCI platform. Also added separate
> files for PCI and PLATFORM modes of operation.
>
> Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com>
You might like to try compiling with the platform version enabled too.
Cheers
James
> ---
> v2:
> *As per Suggestions by Will Newton and James Hogan
> -Reduced the number of ifdefs
> v3:
> *As per Suggestions by Will Newton and James Hogan
> -Added separate files for PCI and PLATFORM Modes similar to SDHCI driver
> v4:
> *As per Suggestions by James Hogan
> -Fixed Indentation Issue.
> -Added Proper error Handling for probe and remove sequences.
> -Modified location of some code.
> -Added isr_flags to dw_mmc.h and removed the ifdef PCI from driver.
> v5:
> *As per Suggestions by James Hogan
> -removed the redundant code.
> -fixed the compilation errors.
> -Modified the menuconfig Message for PLATFORM mode.
> drivers/mmc/host/Kconfig | 25 ++++++
> drivers/mmc/host/Makefile | 2 +
> drivers/mmc/host/dw_mmc-pci.c | 152 ++++++++++++++++++++++++++++++++++++++
> drivers/mmc/host/dw_mmc-pltfm.c | 133 +++++++++++++++++++++++++++++++++
> drivers/mmc/host/dw_mmc.c | 156 +++++++++++++-------------------------
> drivers/mmc/host/dw_mmc.h | 7 ++
> include/linux/mmc/dw_mmc.h | 8 ++-
> 7 files changed, 379 insertions(+), 104 deletions(-)
> create mode 100644 drivers/mmc/host/dw_mmc-pci.c
> create mode 100644 drivers/mmc/host/dw_mmc-pltfm.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 87d5067..72f48b9 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -534,6 +534,31 @@ config MMC_DW_IDMAC
> Designware Mobile Storage IP block. This disables the external DMA
> interface.
>
> +config MMC_DW_PLTFM
> + tristate "Synopsys Designware MCI Support as platform device"
> + depends on MMC_DW
> + default y
> + help
> + This selects the common helper functions support for Host Controller
> + Interface based platform driver. Please select this option if the IP
> + is present as a platform device. This is the common interface for the
> + Synopsys Designware IP.
> +
> + If you have a controller with this interface, say Y or M here.
> +
> + If unsure, say Y.
> +
> +config MMC_DW_PCI
> + tristate "Synopsys Designware MCI support on PCI bus"
> + depends on MMC_DW && PCI
> + help
> + This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
> + Select this option if the IP is present on PCI platform.
> +
> + If you have a controller with this interface, say Y or M here.
> +
> + If unsure, say N.
> +
> config MMC_SH_MMCIF
> tristate "SuperH Internal MMCIF support"
> depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index b4b83f3..3aa2fa3 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -38,6 +38,8 @@ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o
> obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
> obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
> obj-$(CONFIG_MMC_DW) += dw_mmc.o
> +obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
> +obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
> obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
> obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
> obj-$(CONFIG_MMC_VUB300) += vub300.o
> diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c
> new file mode 100644
> index 0000000..5734cf7
> --- /dev/null
> +++ b/drivers/mmc/host/dw_mmc-pci.c
> @@ -0,0 +1,152 @@
> +/*
> + * Synopsys DesignWare Multimedia Card PCI Interface driver
> + *
> + * Copyright (C) 2011 Vayavya Labs Pvt. Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/pci.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/dw_mmc.h>
> +#include "dw_mmc.h"
> +
> +#define PCI_BAR_NO 2
> +#define COMPLETE_BAR 0
> +#define DW_MCI_VENDOR_ID 0x700
> +#define DW_MCI_DEVICE_ID 0x1107
> +/* Defining the Capabilities */
> +#define DW_MCI_CAPABILITIES (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |\
> + MMC_CAP_SD_HIGHSPEED | MMC_CAP_8_BIT_DATA |\
> + MMC_CAP_SDIO_IRQ)
> +
> +static struct dw_mci_board pci_board_data = {
> + .num_slots = 1,
> + .caps = DW_MCI_CAPABILITIES,
> + .bus_hz = 33 * 1000 * 1000,
> + .detect_delay_ms = 200,
> + .fifo_depth = 32,
> +};
> +
> +static int __devinit dw_mci_pci_probe(struct pci_dev *pdev,
> + const struct pci_device_id *entries)
> +{
> + struct dw_mci *host;
> + int ret;
> +
> + ret = pci_enable_device(pdev);
> + if (ret)
> + return ret;
> + if (pci_request_regions(pdev, "dw_mmc_pci")) {
> + ret = -ENODEV;
> + goto err_disable_dev;
> + }
> +
> + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL);
> + if (!host) {
> + ret = -ENOMEM;
> + goto err_release;
> + }
> +
> + host->irq = pdev->irq;
> + host->irq_flags = IRQF_SHARED;
> + host->dev = pdev->dev;
> + host->pdata = &pci_board_data;
> +
> + host->regs = pci_iomap(pdev, PCI_BAR_NO, COMPLETE_BAR);
> + if (!host->regs) {
> + ret = -EIO;
> + goto err_unmap;
> + }
> +
> + pci_set_drvdata(pdev, host);
> + ret = dw_mci_probe(host);
> + if (ret)
> + goto err_probe_failed;
> + return ret;
> +
> +err_probe_failed:
> + pci_iounmap(pdev, host->regs);
> +err_unmap:
> + kfree(host);
> +err_release:
> + pci_release_regions(pdev);
> +err_disable_dev:
> + pci_disable_device(pdev);
> + return ret;
> +}
> +
> +static void __devexit dw_mci_pci_remove(struct pci_dev *pdev)
> +{
> + struct dw_mci *host = pci_get_drvdata(pdev);
> +
> + dw_mci_remove(host);
> + pci_set_drvdata(pdev, NULL);
> + pci_release_regions(pdev);
> + pci_iounmap(pdev, host->regs);
> + kfree(host);
> + pci_disable_device(pdev);
> +}
> +
> +#ifdef CONFIG_PM
> +static int dw_mci_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
> +{
> + int ret;
> + struct dw_mci *host = pci_get_drvdata(pdev);
> +
> + ret = dw_mci_suspend(host);
> + return ret;
> +}
> +
> +static int dw_mci_pci_resume(struct pci_dev *pdev)
> +{
> + int ret;
> + struct dw_mci *host = pci_get_drvdata(pdev);
> +
> + ret = dw_mci_resume(host);
> + return ret;
> +}
> +
> +#else
> +#define dw_mci_pci_suspend NULL
> +#define dw_mci_pci_resume NULL
> +#endif /* CONFIG_PM */
> +
> +static DEFINE_PCI_DEVICE_TABLE(dw_mci_pci_id) = {
> + { PCI_DEVICE(DW_MCI_DEVICE_ID, DW_MCI_VENDOR_ID) },
> + {}
> +};
> +MODULE_DEVICE_TABLE(pci, dw_mci_pci_id);
> +
> +static struct pci_driver dw_mci_pci_driver = {
> + .name = "dw_mmc_pci",
> + .id_table = dw_mci_pci_id,
> + .probe = dw_mci_pci_probe,
> + .remove = dw_mci_pci_remove,
> + .suspend = dw_mci_pci_suspend,
> + .resume = dw_mci_pci_resume,
> +};
> +
> +static int __init dw_mci_init(void)
> +{
> + return pci_register_driver(&dw_mci_pci_driver);
> +}
> +
> +static void __exit dw_mci_exit(void)
> +{
> + pci_unregister_driver(&dw_mci_pci_driver);
> +}
> +
> +module_init(dw_mci_init);
> +module_exit(dw_mci_exit);
> +
> +MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver");
> +MODULE_AUTHOR("Shashidhar Hiremath <shashidharh@vayavyalabs.com>");
> +MODULE_AUTHOR("VayavyaLabs Pvt. Ltd.");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> new file mode 100644
> index 0000000..fdf148d
> --- /dev/null
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -0,0 +1,133 @@
> +/*
> + * Synopsys DesignWare Multimedia Card Interface driver
> + *
> + * Copyright (C) 2009 NXP Semiconductors
> + * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/dw_mmc.h>
> +#include "dw_mmc.h"
> +
> +static int dw_mci_pltfm_probe(struct platform_device *pdev)
> +{
> + struct dw_mci *host;
> + struct resource *regs;
> + int ret;
> +
> + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL);
> + if (!host)
> + return -ENOMEM;
> +
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!regs) {
> + ret = -ENXIO;
> + goto err_free;
> + }
> +
> + host->irq = platform_get_irq(pdev, 0);
> + if (host->irq < 0) {
> + ret = host->irq;
> + goto err_free;
> + }
> +
> + host->dev = pdev->dev;
> + host->irq_flags = 0;
> + host->pdata = pdev->dev.platform_data;
> + ret = -ENOMEM;
> + host->regs = ioremap(regs->start, resource_size(regs));
> + if (!host->regs)
> + goto err_free;
> + platform_set_drvdata(pdev, host);
> + ret = dw_mci_probe(host);
> + if (ret)
> + goto err_out;
> + return ret;
> +err_out:
> + iounmap(host->regs);
> +err_free:
> + kfree(host);
> + return ret;
> +}
> +
> +static int __exit dw_mci_pltfm_remove(struct platform_device *pdev)
> +{
> + struct dw_mci *host = platform_get_drvdata(pdev);
> +
> +
> + platform_set_drvdata(pdev, NULL);
> + dw_mci_remove(host);
> + iounmap(host->regs);
> + kfree(host);
> + return 0;
> +}
> +#ifdef CONFIG_PM
> +/*
> + * TODO: we should probably disable the clock to the card in the suspend path.
> + */
> +static int dw_mci_pltfm_suspend(struct platform_device *pdev, pm_message_t mesg)
> +{
> +
> + int ret;
> + struct dw_mci *host = platform_get_drvdata(pdev);
> +
> + ret = dw_mci_suspend(host);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int dw_mci_pltfm_resume(struct platform_device *pdev)
> +{
> +
> + int ret;
> + struct dw_mci *host = platform_get_drvdata(pdev);
> +
> + ret = dw_mci_resume(host);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +#else
> +#define dw_mci_pltfm_suspend NULL
> +#define dw_mci_pltfm_resume NULL
> +#endif /* CONFIG_PM */
> +
> +static struct platform_driver dw_mci_pltfm_driver = {
> + .remove = __exit_p(dw_mci_pltfm_remove),
> + .suspend = dw_mci_pltfm_suspend,
> + .resume = dw_mci_pltfm_resume,
> + .driver = {
> + .name = "dw_mmc",
> + },
> +};
> +
> +static int __init dw_mci_init(void)
> +{
> + return platform_driver_probe(&dw_mci_pltfm_driver, dw_mci_pltfm_probe);
> +}
> +
> +static void __exit dw_mci_exit(void)
> +{
> + platform_driver_unregister(&dw_mci_pltfm_driver);
> +}
> +
> +module_init(dw_mci_init);
> +module_exit(dw_mci_exit);
> +
> +MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
> +MODULE_AUTHOR("NXP Semiconductor VietNam");
> +MODULE_AUTHOR("Imagination Technologies Ltd");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 3aaeb08..928abc0 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -269,7 +269,7 @@ static void dw_mci_start_command(struct dw_mci *host,
> struct mmc_command *cmd, u32 cmd_flags)
> {
> host->cmd = cmd;
> - dev_vdbg(&host->pdev->dev,
> + dev_vdbg(&host->dev,
> "start command: ARGR=0x%08x CMDR=0x%08x\n",
> cmd->arg, cmd_flags);
>
> @@ -302,7 +302,7 @@ static void dw_mci_dma_cleanup(struct dw_mci *host)
> struct mmc_data *data = host->data;
>
> if (data)
> - dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len,
> + dma_unmap_sg(&host->dev, data->sg, data->sg_len,
> ((data->flags & MMC_DATA_WRITE)
> ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
> }
> @@ -327,7 +327,7 @@ static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> {
> struct mmc_data *data = host->data;
>
> - dev_vdbg(&host->pdev->dev, "DMA complete\n");
> + dev_vdbg(&host->dev, "DMA complete\n");
>
> host->dma_ops->cleanup(host);
>
> @@ -463,10 +463,10 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
> else
> direction = DMA_TO_DEVICE;
>
> - sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len,
> + sg_len = dma_map_sg(&host->dev, data->sg, data->sg_len,
> direction);
>
> - dev_vdbg(&host->pdev->dev,
> + dev_vdbg(&host->dev,
> "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
> (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
> sg_len);
> @@ -804,12 +804,12 @@ static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
> slot = list_entry(host->queue.next,
> struct dw_mci_slot, queue_node);
> list_del(&slot->queue_node);
> - dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
> + dev_vdbg(&host->dev, "list not empty: %s is next\n",
> mmc_hostname(slot->mmc));
> host->state = STATE_SENDING_CMD;
> dw_mci_start_request(host, slot);
> } else {
> - dev_vdbg(&host->pdev->dev, "list empty\n");
> + dev_vdbg(&host->dev, "list empty\n");
> host->state = STATE_IDLE;
> }
>
> @@ -941,7 +941,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
> data->bytes_xfered = 0;
> data->error = -ETIMEDOUT;
> } else {
> - dev_err(&host->pdev->dev,
> + dev_err(&host->dev,
> "data FIFO error "
> "(status=%08x)\n",
> status);
> @@ -1651,7 +1651,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
> struct mmc_host *mmc;
> struct dw_mci_slot *slot;
>
> - mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->pdev->dev);
> + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->dev);
> if (!mmc)
> return -ENOMEM;
>
> @@ -1757,10 +1757,10 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
> static void dw_mci_init_dma(struct dw_mci *host)
> {
> /* Alloc memory for sg translation */
> - host->sg_cpu = dma_alloc_coherent(&host->pdev->dev, PAGE_SIZE,
> + host->sg_cpu = dma_alloc_coherent(&host->dev, PAGE_SIZE,
> &host->sg_dma, GFP_KERNEL);
> if (!host->sg_cpu) {
> - dev_err(&host->pdev->dev, "%s: could not alloc DMA memory\n",
> + dev_err(&host->dev, "%s: could not alloc DMA memory\n",
> __func__);
> goto no_dma;
> }
> @@ -1768,7 +1768,7 @@ static void dw_mci_init_dma(struct dw_mci *host)
> /* Determine which DMA interface to use */
> #ifdef CONFIG_MMC_DW_IDMAC
> host->dma_ops = &dw_mci_idmac_ops;
> - dev_info(&host->pdev->dev, "Using internal DMA controller.\n");
> + dev_info(&host->dev, "Using internal DMA controller.\n");
> #endif
>
> if (!host->dma_ops)
> @@ -1776,12 +1776,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>
> if (host->dma_ops->init) {
> if (host->dma_ops->init(host)) {
> - dev_err(&host->pdev->dev, "%s: Unable to initialize "
> + dev_err(&host->dev, "%s: Unable to initialize "
> "DMA Controller.\n", __func__);
> goto no_dma;
> }
> } else {
> - dev_err(&host->pdev->dev, "DMA initialization not found.\n");
> + dev_err(&host->dev, "DMA initialization not found.\n");
> goto no_dma;
> }
>
> @@ -1789,7 +1789,7 @@ static void dw_mci_init_dma(struct dw_mci *host)
> return;
>
> no_dma:
> - dev_info(&host->pdev->dev, "Using PIO mode.\n");
> + dev_info(&host->dev, "Using PIO mode.\n");
> host->use_dma = 0;
> return;
> }
> @@ -1815,61 +1815,37 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host)
> return false;
> }
>
> -static int dw_mci_probe(struct platform_device *pdev)
> +int dw_mci_probe(struct dw_mci *host)
> {
> - struct dw_mci *host;
> - struct resource *regs;
> - struct dw_mci_board *pdata;
> - int irq, ret, i, width;
> + int width, i, ret = 0;
> u32 fifo_size;
>
> - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!regs)
> - return -ENXIO;
> -
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> - return irq;
> -
> - host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL);
> - if (!host)
> - return -ENOMEM;
> -
> - host->pdev = pdev;
> - host->pdata = pdata = pdev->dev.platform_data;
> - if (!pdata || !pdata->init) {
> - dev_err(&pdev->dev,
> + if (!host->pdata || !host->pdata->init) {
> + dev_err(&host->dev,
> "Platform data must supply init function\n");
> - ret = -ENODEV;
> - goto err_freehost;
> + return -ENODEV;
> }
>
> - if (!pdata->select_slot && pdata->num_slots > 1) {
> - dev_err(&pdev->dev,
> + if (!host->pdata->select_slot && host->pdata->num_slots > 1) {
> + dev_err(&host->dev,
> "Platform data must supply select_slot function\n");
> - ret = -ENODEV;
> - goto err_freehost;
> + return -ENODEV;
> }
>
> - if (!pdata->bus_hz) {
> - dev_err(&pdev->dev,
> + if (!host->pdata->bus_hz) {
> + dev_err(&host->dev,
> "Platform data must supply bus speed\n");
> - ret = -ENODEV;
> - goto err_freehost;
> + return -ENODEV;
> }
>
> - host->bus_hz = pdata->bus_hz;
> - host->quirks = pdata->quirks;
> + host->bus_hz = host->pdata->bus_hz;
> + host->quirks = host->pdata->quirks;
>
> spin_lock_init(&host->lock);
> INIT_LIST_HEAD(&host->queue);
>
> - ret = -ENOMEM;
> - host->regs = ioremap(regs->start, resource_size(regs));
> - if (!host->regs)
> - goto err_freehost;
>
> - host->dma_ops = pdata->dma_ops;
> + host->dma_ops = host->pdata->dma_ops;
> dw_mci_init_dma(host);
>
> /*
> @@ -1899,7 +1875,7 @@ static int dw_mci_probe(struct platform_device *pdev)
> }
>
> /* Reset all blocks */
> - if (!mci_wait_reset(&pdev->dev, host)) {
> + if (!mci_wait_reset(&host->dev, host)) {
> ret = -ENODEV;
> goto err_dmaunmap;
> }
> @@ -1942,13 +1918,11 @@ static int dw_mci_probe(struct platform_device *pdev)
> if (!dw_mci_card_workqueue)
> goto err_dmaunmap;
> INIT_WORK(&host->card_work, dw_mci_work_routine_card);
> -
> - ret = request_irq(irq, dw_mci_interrupt, 0, "dw-mci", host);
> + ret = request_irq(host->irq, dw_mci_interrupt,
> + host->irq_flags, "dw-mci", host);
> if (ret)
> goto err_workqueue;
>
> - platform_set_drvdata(pdev, host);
> -
> if (host->pdata->num_slots)
> host->num_slots = host->pdata->num_slots;
> else
> @@ -1968,7 +1942,7 @@ static int dw_mci_probe(struct platform_device *pdev)
> * Need to check the version-id and set data-offset for DATA register.
> */
> host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
> - dev_info(&pdev->dev, "Version ID is %04x\n", host->verid);
> + dev_info(&host->dev, "Version ID is %04x\n", host->verid);
>
> if (host->verid < DW_MMC_240A)
> host->data_offset = DATA_OFFSET;
> @@ -1985,12 +1959,12 @@ static int dw_mci_probe(struct platform_device *pdev)
> DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
> mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
>
> - dev_info(&pdev->dev, "DW MMC controller at irq %d, "
> + dev_info(&host->dev, "DW MMC controller at irq %d, "
> "%d bit host data width, "
> "%u deep fifo\n",
> - irq, width, fifo_size);
> + host->irq, width, fifo_size);
> if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
> - dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n");
> + dev_info(&host->dev, "Internal DMAC interrupt fix enabled.\n");
>
> return 0;
>
> @@ -2001,7 +1975,7 @@ err_init_slot:
> dw_mci_cleanup_slot(host->slot[i], i);
> i--;
> }
> - free_irq(irq, host);
> + free_irq(host->irq, host);
>
> err_workqueue:
> destroy_workqueue(dw_mci_card_workqueue);
> @@ -2009,33 +1983,26 @@ err_workqueue:
> err_dmaunmap:
> if (host->use_dma && host->dma_ops->exit)
> host->dma_ops->exit(host);
> - dma_free_coherent(&host->pdev->dev, PAGE_SIZE,
> + dma_free_coherent(&host->dev, PAGE_SIZE,
> host->sg_cpu, host->sg_dma);
> - iounmap(host->regs);
>
> if (host->vmmc) {
> regulator_disable(host->vmmc);
> regulator_put(host->vmmc);
> }
> -
> -
> -err_freehost:
> - kfree(host);
> return ret;
> }
> +EXPORT_SYMBOL(dw_mci_probe);
>
> -static int __exit dw_mci_remove(struct platform_device *pdev)
> +void dw_mci_remove(struct dw_mci *host)
> {
> - struct dw_mci *host = platform_get_drvdata(pdev);
> int i;
>
> mci_writel(host, RINTSTS, 0xFFFFFFFF);
> mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
>
> - platform_set_drvdata(pdev, NULL);
> -
> for (i = 0; i < host->num_slots; i++) {
> - dev_dbg(&pdev->dev, "remove slot %d\n", i);
> + dev_dbg(&host->dev, "remove slot %d\n", i);
> if (host->slot[i])
> dw_mci_cleanup_slot(host->slot[i], i);
> }
> @@ -2044,9 +2011,9 @@ static int __exit dw_mci_remove(struct platform_device *pdev)
> mci_writel(host, CLKENA, 0);
> mci_writel(host, CLKSRC, 0);
>
> - free_irq(platform_get_irq(pdev, 0), host);
> + free_irq(host->irq, host);
> destroy_workqueue(dw_mci_card_workqueue);
> - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
> + dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
>
> if (host->use_dma && host->dma_ops->exit)
> host->dma_ops->exit(host);
> @@ -2056,20 +2023,18 @@ static int __exit dw_mci_remove(struct platform_device *pdev)
> regulator_put(host->vmmc);
> }
>
> - iounmap(host->regs);
> -
> - kfree(host);
> - return 0;
> }
> +EXPORT_SYMBOL(dw_mci_remove);
> +
> +
>
> #ifdef CONFIG_PM
> /*
> * TODO: we should probably disable the clock to the card in the suspend path.
> */
> -static int dw_mci_suspend(struct platform_device *pdev, pm_message_t mesg)
> +int dw_mci_suspend(struct dw_mci *host)
> {
> - int i, ret;
> - struct dw_mci *host = platform_get_drvdata(pdev);
> + int i, ret = 0;
>
> for (i = 0; i < host->num_slots; i++) {
> struct dw_mci_slot *slot = host->slot[i];
> @@ -2091,19 +2056,18 @@ static int dw_mci_suspend(struct platform_device *pdev, pm_message_t mesg)
>
> return 0;
> }
> +EXPORT_SYMBOL(dw_mci_suspend);
>
> -static int dw_mci_resume(struct platform_device *pdev)
> +int dw_mci_resume(struct dw_mci *host)
> {
> int i, ret;
> - struct dw_mci *host = platform_get_drvdata(pdev);
> -
> if (host->vmmc)
> regulator_enable(host->vmmc);
>
> if (host->dma_ops->init)
> host->dma_ops->init(host);
>
> - if (!mci_wait_reset(&pdev->dev, host)) {
> + if (!mci_wait_reset(&host->dev, host)) {
> ret = -ENODEV;
> return ret;
> }
> @@ -2125,31 +2089,19 @@ static int dw_mci_resume(struct platform_device *pdev)
> if (ret < 0)
> return ret;
> }
> -
> return 0;
> }
> -#else
> -#define dw_mci_suspend NULL
> -#define dw_mci_resume NULL
> +EXPORT_SYMBOL(dw_mci_resume);
> #endif /* CONFIG_PM */
>
> -static struct platform_driver dw_mci_driver = {
> - .remove = __exit_p(dw_mci_remove),
> - .suspend = dw_mci_suspend,
> - .resume = dw_mci_resume,
> - .driver = {
> - .name = "dw_mmc",
> - },
> -};
> -
> static int __init dw_mci_init(void)
> {
> - return platform_driver_probe(&dw_mci_driver, dw_mci_probe);
> + printk(KERN_INFO "Synopsys Designware Multimedia Card Interface Driver");
> + return 0;
> }
>
> static void __exit dw_mci_exit(void)
> {
> - platform_driver_unregister(&dw_mci_driver);
> }
>
> module_init(dw_mci_init);
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 72c071f..70078f6 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -175,4 +175,11 @@
> (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value))
> #endif
>
> +extern int dw_mci_probe(struct dw_mci *host);
> +extern void dw_mci_remove(struct dw_mci *host);
> +#ifdef CONFIG_PM
> +extern int dw_mci_suspend(struct dw_mci *host);
> +extern int dw_mci_resume(struct dw_mci *host);
> +#endif
> +
> #endif /* _DW_MMC_H_ */
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 6dc9b80..9cf592c 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -74,7 +74,7 @@ struct mmc_data;
> * @num_slots: Number of slots available.
> * @verid: Denote Version ID.
> * @data_offset: Set the offset of DATA register according to VERID.
> - * @pdev: Platform device associated with the MMC controller.
> + * @dev: Device associated with the MMC controller.
> * @pdata: Platform data associated with the MMC controller.
> * @slot: Slots sharing this MMC controller.
> * @fifo_depth: depth of FIFO.
> @@ -85,6 +85,8 @@ struct mmc_data;
> * @push_data: Pointer to FIFO push function.
> * @pull_data: Pointer to FIFO pull function.
> * @quirks: Set of quirks that apply to specific versions of the IP.
> + * @irq_flags: The flags to be passed to request_irq.
> + * @irq: The irq value to be passed to request_irq.
> *
> * Locking
> * =======
> @@ -151,7 +153,7 @@ struct dw_mci {
> u32 fifoth_val;
> u16 verid;
> u16 data_offset;
> - struct platform_device *pdev;
> + struct device dev;
> struct dw_mci_board *pdata;
> struct dw_mci_slot *slot[MAX_MCI_SLOTS];
>
> @@ -172,6 +174,8 @@ struct dw_mci {
> u32 quirks;
>
> struct regulator *vmmc; /* Power regulator */
> + unsigned long irq_flags; /* IRQ flags */
> + unsigned int irq;
> };
>
> /* DMA ops for Internal/External DMAC interface */
next prev parent reply other threads:[~2011-12-01 9:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-01 9:41 [PATCH v5 1/1] mmc:Support of PCI mode for the dw_mmc driver Shashidhar Hiremath
2011-12-01 9:46 ` James Hogan [this message]
2011-12-01 10:51 ` Shashidhar Hiremath
2011-12-01 11:03 ` James Hogan
2011-12-22 5:43 ` Shashidhar Hiremath
2011-12-22 14:36 ` James Hogan
2012-01-11 9:33 ` Shashidhar Hiremath
2012-01-11 9:37 ` James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ED74CFF.80705@imgtec.com \
--to=james.hogan@imgtec.com \
--cc=cjb@laptop.org \
--cc=jh80.chung@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=prakity@marvell.com \
--cc=shashidharh@vayavyalabs.com \
--cc=shawn.guo@linaro.org \
--cc=w.sang@pengutronix.de \
--cc=will.newton@imgtec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).