From: Adrian Hunter <adrian.hunter@intel.com>
To: Sujit Reddy Thumma <sthumma@codeaurora.org>
Cc: linux-mmc@vger.kernel.org, per.lkml@gmail.com, cjb@laptop.org
Subject: Re: [PATCH V4] mmc: Kill block requests if card is removed
Date: Thu, 08 Dec 2011 11:22:23 +0200 [thread overview]
Message-ID: <4EE081CF.3010303@intel.com> (raw)
In-Reply-To: <1323333350-14315-1-git-send-email-sthumma@codeaurora.org>
On 08/12/11 10:35, Sujit Reddy Thumma wrote:
> Kill block requests when the host realizes that the card is
> removed from the slot and is sure that subsequent requests
> are bound to fail. Do this silently so that the block
> layer doesn't output unnecessary error messages.
>
> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
>
> ---
> Changes in v4:
> - Extra check to make sure no further commands are sent
> in error case when the card is removed.
> Changes in v3:
> - Dropped dependency on Per's patch and is now dependent
> on "[PATCH V4] mmc: allow upper layers to determine immediately
> if a card has been removed" by Adrian Hunter.
> - Modified commit text slightly as Adrian has
> implemented his own suggestion in a different patch.
>
> Changes in v2:
> - Changed the implementation with further comments from Adrian
> - Set the card removed flag in bus notifier callbacks
> - This patch is now dependent on patch from Per Forlin:
> http://thread.gmane.org/gmane.linux.kernel.mmc/11128/focus=11211
> ---
> drivers/mmc/card/block.c | 17 ++++++++++++++++-
> drivers/mmc/card/queue.c | 5 +++++
> 2 files changed, 21 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
> index 0c959c9..0cad48a 100644
> --- a/drivers/mmc/card/block.c
> +++ b/drivers/mmc/card/block.c
> @@ -121,6 +121,7 @@ enum mmc_blk_status {
> MMC_BLK_ABORT,
> MMC_BLK_DATA_ERR,
> MMC_BLK_ECC_ERR,
> + MMC_BLK_NOMEDIUM,
> };
>
> module_param(perdev_minors, int, 0444);
> @@ -639,6 +640,7 @@ static int get_card_status(struct mmc_card *card, u32 *status, int retries)
> return err;
> }
>
> +#define ERR_NOMEDIUM 3
> #define ERR_RETRY 2
> #define ERR_ABORT 1
> #define ERR_CONTINUE 0
> @@ -706,6 +708,9 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
> u32 status, stop_status = 0;
> int err, retry;
>
> + if (mmc_card_removed(card))
> + return ERR_NOMEDIUM;
> +
> /*
> * Try to get card status which indicates both the card state
> * and why there was no response. If the first attempt fails,
> @@ -722,8 +727,12 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
> }
>
> /* We couldn't get a response from the card. Give up. */
> - if (err)
> + if (err) {
> + /* Check if the card is removed */
> + if (mmc_detect_card_removed(card->host))
> + return ERR_NOMEDIUM;
> return ERR_ABORT;
> + }
>
> /* Flag ECC errors */
> if ((status & R1_CARD_ECC_FAILED) ||
> @@ -996,6 +1005,8 @@ static int mmc_blk_err_check(struct mmc_card *card,
> return MMC_BLK_RETRY;
> case ERR_ABORT:
> return MMC_BLK_ABORT;
> + case ERR_NOMEDIUM:
> + return MMC_BLK_NOMEDIUM;
> case ERR_CONTINUE:
> break;
> }
> @@ -1329,6 +1340,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
> if (!ret)
> goto start_new_req;
> break;
> + case MMC_BLK_NOMEDIUM:
> + goto cmd_abort;
> }
>
> if (ret) {
> @@ -1345,6 +1358,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
>
> cmd_abort:
> spin_lock_irq(&md->lock);
> + if (mmc_card_removed(card))
> + req->cmd_flags |= REQ_QUIET;
> while (ret)
> ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
> spin_unlock_irq(&md->lock);
> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
> index dcad59c..2517547 100644
> --- a/drivers/mmc/card/queue.c
> +++ b/drivers/mmc/card/queue.c
> @@ -29,6 +29,8 @@
> */
> static int mmc_prep_request(struct request_queue *q, struct request *req)
> {
> + struct mmc_queue *mq = q->queuedata;
> +
> /*
> * We only like normal block requests and discards.
> */
> @@ -37,6 +39,9 @@ static int mmc_prep_request(struct request_queue *q, struct request *req)
> return BLKPREP_KILL;
> }
>
> + if (mq && mmc_card_removed(mq->card))
> + return BLKPREP_KILL;
> +
> req->cmd_flags |= REQ_DONTPREP;
>
> return BLKPREP_OK;
next prev parent reply other threads:[~2011-12-08 9:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-08 8:35 [PATCH V4] mmc: Kill block requests if card is removed Sujit Reddy Thumma
2011-12-08 9:22 ` Adrian Hunter [this message]
2011-12-21 11:06 ` Sujit Reddy Thumma
2011-12-25 1:58 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE081CF.3010303@intel.com \
--to=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=per.lkml@gmail.com \
--cc=sthumma@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).