linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name()
Date: Fri, 02 Mar 2012 14:36:54 +0530	[thread overview]
Message-ID: <4F508DAE.9000005@ti.com> (raw)
In-Reply-To: <20120301185044.29210.44521.stgit@kaulin.local>

Hi Tony,

On Friday 02 March 2012 12:25 AM, Tony Lindgren wrote:
> Hi all,
>
> This series adds gpio_find_by_name() that allows finding
> GPIOs on specific gpio_chips. As the GPIO numbers can be
> dynamic, it's hard to find the GPIO numbers from drivers
> using them directly.
>
> So far we've dealt with this using platform specific callbacks,
> but that is messy. This series removes the needs for these
> callbacks for omap hsmmc driver. Further callbacks can be
> removed people are OK with adding gpio_find_by_name().
>
> This series is based on the omap fixes-non-critical that's
> needed for the arch/arm/mach-omap2 parts of this series.

I tested these on my beagle/panda/omap4sdp and they seem to
work fine, also fixing the broken panda card detect (due to
missing card_detect_irq in the board file). There are still
issues however when I build twl4030-gpio as a module, which I
already commented on, and the fact that the init sequence now
works by luck :)
The other issue also is that the multiple insmod/rmmod test
suggested by Russell still fails, since the second time around
the gpio_requests in the board callback fail because they are
not freed when you do a module unload/unbind.
That would need this patch from me to add the .teardown
hooks
http://marc.info/?l=linux-omap&m=133007767831297&w=2

regards,
Rajendra

>
> Regards,
>
> Tony
>
> ---
>
> Tony Lindgren (4):
>        gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name()
>        mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init()
>        mmc: omap_hsmmc: Use GPIO offset for external GPIO chips
>        mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect
>
>
>   arch/arm/mach-omap2/board-3430sdp.c          |   13 +-
>   arch/arm/mach-omap2/board-4430sdp.c          |   45 --------
>   arch/arm/mach-omap2/board-cm-t35.c           |    8 -
>   arch/arm/mach-omap2/board-devkit8000.c       |    7 -
>   arch/arm/mach-omap2/board-igep0020.c         |    8 -
>   arch/arm/mach-omap2/board-omap3beagle.c      |    9 +-
>   arch/arm/mach-omap2/board-omap3evm.c         |    8 -
>   arch/arm/mach-omap2/board-omap3pandora.c     |   13 +-
>   arch/arm/mach-omap2/board-omap3stalker.c     |    8 -
>   arch/arm/mach-omap2/board-omap3touchbook.c   |    7 -
>   arch/arm/mach-omap2/board-omap4panda.c       |   52 ----------
>   arch/arm/mach-omap2/board-zoom-peripherals.c |    7 -
>   arch/arm/mach-omap2/hsmmc.c                  |    3 +
>   arch/arm/mach-omap2/hsmmc.h                  |    5 +
>   arch/arm/plat-omap/include/plat/mmc.h        |    3 +
>   drivers/gpio/gpio-twl4030.c                  |    2
>   drivers/gpio/gpiolib.c                       |   47 +++++++++
>   drivers/mfd/twl6030-irq.c                    |   33 +++---
>   drivers/mmc/host/omap_hsmmc.c                |  140 +++++++++++++++++++-------
>   include/asm-generic/gpio.h                   |    3 -
>   20 files changed, 204 insertions(+), 217 deletions(-)
>


  parent reply	other threads:[~2012-03-02  9:07 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-01 18:55 [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name() Tony Lindgren
2012-03-01 18:55 ` [PATCH 1/4] gpiolib: Add gpiochip_find_by_name() and gpio_find_by_chip_name() Tony Lindgren
2012-03-02  7:58   ` Grant Likely
2012-03-02 17:03     ` Tony Lindgren
2012-03-02 18:08       ` Tony Lindgren
2012-03-02 18:48         ` Grant Likely
2012-03-02 19:06           ` Tony Lindgren
2012-03-09  1:05             ` Grant Likely
2012-03-09  2:09               ` Tony Lindgren
2012-03-01 18:55 ` [PATCH 2/4] mmc: omap_hsmmc: Use gpio_find_by_chip_name() for omap_hsmmc_gpio_init() Tony Lindgren
2012-03-02  5:54   ` Rajendra Nayak
2012-03-02 17:06     ` Tony Lindgren
2012-03-02  7:25   ` Rajendra Nayak
2012-03-02 17:08     ` Tony Lindgren
2012-03-02 18:35       ` Tony Lindgren
2012-03-01 18:55 ` [PATCH 3/4] mmc: omap_hsmmc: Use GPIO offset for external GPIO chips Tony Lindgren
2012-03-02  6:02   ` Rajendra Nayak
2012-03-02 17:16     ` Tony Lindgren
2012-03-01 18:55 ` [PATCH 4/4] mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect Tony Lindgren
2012-03-02  6:10   ` Rajendra Nayak
2012-03-02 17:22     ` Tony Lindgren
2012-03-05  9:16       ` Rajendra Nayak
2012-03-05 10:25         ` T Krishnamoorthy, Balaji
2012-03-07 15:36           ` T Krishnamoorthy, Balaji
2012-03-07 15:42             ` Chris Ball
2012-03-07 17:31               ` Tony Lindgren
2012-03-08 15:53               ` T Krishnamoorthy, Balaji
2012-03-02 10:25   ` Samuel Ortiz
2012-03-02  9:06 ` Rajendra Nayak [this message]
2012-03-02 17:30   ` [PATCH 0/4] Start getting rid of pdata callbacks with gpio_find_by_chip_name() Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F508DAE.9000005@ti.com \
    --to=rnayak@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).