[PATCH] mmc: core: add the warning message when card didn't support HPI

[Jaehoon Chung <jh80.chung@samsung.com>]

Though card didn't support HPI,someone could use the send_hpi_cmd().
Then maybe didn't work fine.
Because card->ext_csd.hpi_cmd didn't set.
So if card didn't support hpi, return the waring message.

And CMD12's flags is MMC_RSP_R1B.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/mmc/core/mmc_ops.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 4d41fa9..395f944 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -556,9 +556,15 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 	unsigned int flags;
 	int err;
 
+	if (!card->ext_csd.hpi) {
+		pr_waring("%s: Card didn't support HPI command\n",
+				mmc_hostname(card->host));
+		return -EINVAL;
+	}
+
 	opcode = card->ext_csd.hpi_cmd;
 	if (opcode == MMC_STOP_TRANSMISSION)
-		flags = MMC_RSP_R1 | MMC_CMD_AC;
+		flags = MMC_RSP_R1B | MMC_CMD_AC;
 	else if (opcode == MMC_SEND_STATUS)
 		flags = MMC_RSP_R1 | MMC_CMD_AC;