Re: [PATCH] mmc:sdio:retry CMD52/53 when error happens

[Ulf Hansson <ulf.hansson@stericsson.com>]

Hi Yongd,

 From my perspective I don't think this patch is wanted.

A retry mechanism is likely very much hw-SDIO device dependent. Upper 
layers (SDIO func driver) is thus the only software that is able to 
handle retries correctly.

Kind regards
Ulf Hansson


On 05/14/2012 10:39 AM, yongd wrote:
>    Set sdio CMD52/53's retry time as MMC_CMD_RETRIES. As a result,
> sdio might benefit from core-internal CMD retry mechanism when
> some errors happen(CRC, etc).
>
> Signed-off-by: yongd<yongd@marvell.com>
> ---
>   drivers/mmc/core/sdio_ops.c |    3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
> index d29e206..884c27e 100644
> --- a/drivers/mmc/core/sdio_ops.c
> +++ b/drivers/mmc/core/sdio_ops.c
> @@ -86,7 +86,7 @@ static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
>   	cmd.arg |= in;
>   	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
>
> -	err = mmc_wait_for_cmd(host,&cmd, 0);
> +	err = mmc_wait_for_cmd(host,&cmd, MMC_CMD_RETRIES);
>   	if (err)
>   		return err;
>
> @@ -147,6 +147,7 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
>   	else
>   		cmd.arg |= 0x08000000 | blocks;		/* block mode */
>   	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
> +	cmd.retries = MMC_CMD_RETRIES;
>
>   	data.blksz = blksz;
>   	/* Code in host drivers/fwk assumes that "blocks" always is>=1 */