Re: [PATCH v1] mmc: sdhci-of-dwcmshc: fix init for AXI clock and DMA 128MB boundary

[Krzysztof Kozlowski <krzk@kernel.org>]

On 09/01/2026 04:28, hehuan1@eswincomputing.com wrote:
> From: Huan He <hehuan1@eswincomputing.com>
> 
> 1.Accessing the High-Speed registers requires the AXI clock to be enabled.
> 2.This DWC MSHC has a 128MB limitation where the data buffer size and
>   start address must not exceed the 128MB boundary. Registering the
>   missing 'adma_write_desc' callback function.
> 
> Signed-off-by: Huan He <hehuan1@eswincomputing.com>
> ---
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index 51949cde0958..147f8046707f 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -1588,6 +1588,7 @@ static int eic7700_init(struct device *dev, struct sdhci_host *host, struct dwcm
>  {
>  	u32 emmc_caps = MMC_CAP2_NO_SD | MMC_CAP2_NO_SDIO;
>  	unsigned int val, hsp_int_status, hsp_pwr_ctrl;
> +	static const char * const clk_ids[] = {"axi"};
>  	struct of_phandle_args args;
>  	struct eic7700_priv *priv;
>  	struct regmap *hsp_regmap;
> @@ -1605,6 +1606,11 @@ static int eic7700_init(struct device *dev, struct sdhci_host *host, struct dwcm
>  		return ret;
>  	}
>  
> +	ret = dwcmshc_get_enable_other_clks(mmc_dev(host->mmc), dwc_priv,
> +					    ARRAY_SIZE(clk_ids), clk_ids);

Is this clock (ABI) already documented?

Best regards,
Krzysztof