From: maximlevitsky@gmail.com
To: Philip Langdale <philipl@overt.org>
Cc: linux-mmc@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>,
Andrew de Quincey <adq_dvb@lidskialf.net>,
Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH v4] mmc: make sdhci work with ricoh mmc controller
Date: Fri, 11 Jun 2010 22:15:02 +0300 [thread overview]
Message-ID: <4c128b3a.51a3cc0a.3161.30ab@mx.google.com> (raw)
In-Reply-To: <1276283286.8557.28.camel@maxim-laptop>
From: Maxim Levitsky <maximlevitsky@gmail.com>
The current way of disabling it is not well tested by vendor
and has all kinds of bugs that show up on resume from ram/disk.
Old way of disabling is still supported by
continuing to use CONFIG_MMC_RICOH_MMC.
Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html'
Most of the credit for this goes to Andrew de Quincey
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
CC: Andrew de Quincey <adq_dvb@lidskialf.net>
CC: linux-mmc@vger.kernel.org <linux-mmc@vger.kernel.org>
---
drivers/mmc/host/sdhci-pci.c | 41 +++++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci.c | 3 ++-
drivers/mmc/host/sdhci.h | 4 ++++
3 files changed, 47 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 65483fd..e021431 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -17,6 +17,7 @@
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/mmc/host.h>
@@ -84,7 +85,30 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG ||
chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
+ return 0;
+}
+
+static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
+{
+ slot->host->caps =
+ ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
+ & SDHCI_TIMEOUT_CLK_MASK) |
+
+ ((0x21 << SDHCI_CLOCK_BASE_SHIFT)
+ & SDHCI_CLOCK_BASE_MASK) |
+ SDHCI_TIMEOUT_CLK_UNIT |
+ SDHCI_CAN_VDD_330 |
+ SDHCI_CAN_DO_SDMA;
+ return 0;
+}
+
+static int ricoh_mmc_resume(struct sdhci_pci_chip *chip)
+{
+ /* Apply a delay to allow controller to settle */
+ /* Otherwise it becomes confused if card state changed
+ during suspend */
+ msleep(500);
return 0;
}
@@ -95,6 +119,15 @@ static const struct sdhci_pci_fixes sdhci_ricoh = {
SDHCI_QUIRK_CLOCK_BEFORE_RESET,
};
+static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
+ .probe_slot = ricoh_mmc_probe_slot,
+ .resume = ricoh_mmc_resume,
+ .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_CLOCK_BEFORE_RESET |
+ SDHCI_QUIRK_NO_CARD_NO_RESET |
+ SDHCI_QUIRK_MISSING_CAPS
+};
+
static const struct sdhci_pci_fixes sdhci_ene_712 = {
.quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_BROKEN_DMA,
@@ -374,6 +407,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
},
{
+ .vendor = PCI_VENDOR_ID_RICOH,
+ .device = 0x843,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc,
+ },
+
+ {
.vendor = PCI_VENDOR_ID_ENE,
.device = PCI_DEVICE_ID_ENE_CB712_SD,
.subvendor = PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c6d1bd8..483b78e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1687,7 +1687,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->version);
}
- caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
+ sdhci_readl(host, SDHCI_CAPABILITIES);
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c846813..b1839a3 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -240,6 +240,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -292,6 +294,8 @@ struct sdhci_host {
struct timer_list timer; /* Timer for timeouts */
+ unsigned int caps; /* Alternative capabilities */
+
unsigned long private[0] ____cacheline_aligned;
};
--
1.7.0.4
next prev parent reply other threads:[~2010-06-11 19:15 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1275516180.30272.4.camel@maxim-laptop>
2010-06-03 1:16 ` [PATCH] mmc: make sdhci work with ricoh mmc controller Maxim Levitsky
2010-06-03 16:11 ` Philip Langdale
2010-06-03 16:31 ` Maxim Levitsky
2010-06-03 16:39 ` Philip Langdale
2010-06-03 17:05 ` Philip Langdale
2010-06-03 17:35 ` Maxim Levitsky
2010-06-04 4:42 ` Philip Langdale
2010-06-04 10:07 ` Maxim Levitsky
2010-06-04 15:05 ` Philip Langdale
2010-06-04 15:33 ` Maxim Levitsky
2010-06-06 21:24 ` Maxim Levitsky
2010-06-06 21:28 ` [PATCH 1/2] " Maxim Levitsky
2010-06-06 23:11 ` Philip Langdale
2010-06-07 0:37 ` Maxim Levitsky
2010-06-07 1:41 ` Philip Langdale
2010-06-11 19:08 ` [PATCH v3] " Maxim Levitsky
2010-06-11 19:15 ` maximlevitsky [this message]
2010-06-13 11:29 ` [PATCH v4] " Maxim Levitsky
2010-06-13 16:06 ` Philip Langdale
2010-06-06 21:28 ` [PATCH 2/2] mmc: fix mmc card disappearence on resume on ricoh mmc controllers Maxim Levitsky
2010-06-06 23:22 ` Philip Langdale
2010-06-08 8:57 ` Maxim Levitsky
2010-06-06 23:23 ` Chris Ball
2010-06-07 0:33 ` Maxim Levitsky
2010-06-07 5:47 ` Chris Ball
2010-06-08 8:52 ` Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4c128b3a.51a3cc0a.3161.30ab@mx.google.com \
--to=maximlevitsky@gmail.com \
--cc=adq_dvb@lidskialf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=philipl@overt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).