* PCI rescan needed for MMC reader to become usable
@ 2013-01-03 17:02 Cristian Rodríguez
0 siblings, 0 replies; only message in thread
From: Cristian Rodríguez @ 2013-01-03 17:02 UTC (permalink / raw)
To: linux-mmc
Hi:
My laptop's card reader (dell xps 15z uses driver jmb38x_ms, kernel
3.8-rc2 or older no difference) does nothing unless:
a) An SD card is plugged into the slot before powering the machine on.
b) I plug the card and run echo 1 > /sys/bus/pci/rescan
then the device appears
[ 2154.277991] jmb38x_ms 0000:05:00.3: enabling device (0000 -> 0002)
[ 2154.280299] sdhci: Secure Digital Host Controller Interface driver
[ 2154.280301] sdhci: Copyright(c) Pierre Ossman
[ 2154.281171] sdhci-pci 0000:05:00.0: SDHCI controller found
[197b:2392] (rev 30)
[ 2154.281184] sdhci-pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 2154.303986] mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA
[ 2154.304025] sdhci-pci 0000:05:00.2: SDHCI controller found
[197b:2391] (rev 30)
[ 2154.304038] sdhci-pci 0000:05:00.2: enabling device (0000 -> 0002)
[ 2154.304050] sdhci-pci 0000:05:00.2: Refusing to bind to secondary
interface.
[ 2154.573690] mmc0: new SDHC card at address e624
[ 2154.576527] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[ 2154.586277] mmcblk0: p1
After that there is no problem.
Can anyone point to a possible cause of this problem ?
(cc your replies please)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-01-03 17:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-03 17:02 PCI rescan needed for MMC reader to become usable Cristian Rodríguez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).