Re: [PATCH 14/14] mmc: dw_mmc: fix the transfer termination in IDMAC mode

[Jaehoon Chung <jh80.chung@samsung.com>]

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

On 08/21/2013 10:51 PM, Seungwon Jeon wrote:
> In IDMAC mode EVENT_XFER_COMPLETE is set when RI/TI of last descriptor
> is done. So if errors are happened in the middle of data transfers,
> 'dw_mci_stop_dma' during error handing can be called and eventually
> prevents this flag to be set.
> This results in permanent wait for EVENT_XFER_COMPLETE in 'dw_mci_tasklet_func'.
> Therefore, if dma running is stopped forcibly, EVENT_XFER_COMPLETE should be set.
> 
> Reported-by: Bing Zhao <bzhao@marvell.com>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
> ---
>  drivers/mmc/host/dw_mmc.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 8c1926f..5b52ac1 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -345,10 +345,10 @@ static void dw_mci_stop_dma(struct dw_mci *host)
>  	if (host->using_dma) {
>  		host->dma_ops->stop(host);
>  		host->dma_ops->cleanup(host);
> -	} else {
> -		/* Data transfer was stopped by the interrupt handler */
> -		set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
>  	}
> +
> +	/* Data transfer was stopped by the interrupt handler */
> +	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
>  }
>  
>  static int dw_mci_get_dma_dir(struct mmc_data *data)
>