From: Adrian Hunter <adrian.hunter@intel.com>
To: Chris Ball <cjb@laptop.org>
Cc: linux-mmc <linux-mmc@vger.kernel.org>
Subject: [PATCH V3] mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
Date: Mon, 13 Jan 2014 09:49:16 +0200 [thread overview]
Message-ID: <52D39A7C.4070002@intel.com> (raw)
In-Reply-To: <52D39684.2020608@intel.com>
A host controller for a SD card may need a GPIO
for card detect in order to wake up from runtime
suspend when a card is inserted. If that GPIO is
not configured, then the host controller will not
wake up. Fix that for the affected devices by not
enabling runtime PM unless the GPIO is successfully
set up.
This affects BYT sd card host controller which had
runtime PM enabled from v3.11. For completeness,
the MFD sd card host controller is flagged also.
The original patch before rebasing (see link below)
was tested on v3.11.10 and v3.12.4 although the
patch applied with some offsets and fuzz. The
original patch is here:
http://marc.info/?l=linux-mmc&m=138676702327057) was tested on v3.11.10 and v3.12.4
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
V3: Update comments to reflect that the original patch
applies to stable trees whereas the rebased patch does
not.
V2: Rebased
drivers/mmc/host/sdhci-pci.c | 10 ++++++++++
drivers/mmc/host/sdhci-pci.h | 1 +
2 files changed, 11 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index c1a7f31..d520366 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -225,6 +225,7 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.allow_runtime_pm = true,
+ .own_cd_for_runtime_pm = true,
};
static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
@@ -289,6 +290,7 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
.allow_runtime_pm = true,
+ .own_cd_for_runtime_pm = true,
};
/* Define Host controllers for Intel Merrifield platform */
@@ -1370,6 +1372,14 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
sdhci_pci_add_own_cd(slot);
+ /*
+ * Check if the chip needs a separate GPIO for card detect to wake up
+ * from runtime suspend. If it is not there, don't allow runtime PM.
+ * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
+ */
+ if (chip->fixes->own_cd_for_runtime_pm && !gpio_is_valid(slot->cd_gpio))
+ chip->allow_runtime_pm = false;
+
return slot;
remove:
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 0347804..6d71871 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -39,6 +39,7 @@ struct sdhci_pci_fixes {
unsigned int quirks;
unsigned int quirks2;
bool allow_runtime_pm;
+ bool own_cd_for_runtime_pm;
int (*probe) (struct sdhci_pci_chip *);
--
1.7.11.7
next prev parent reply other threads:[~2014-01-13 7:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1386764492-26444-1-git-send-email-adrian.hunter@intel.com>
2013-12-11 12:43 ` [PATCH RESEND] mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend Adrian Hunter
2014-01-13 7:32 ` [PATCH V2 " Adrian Hunter
2014-01-13 7:49 ` Adrian Hunter [this message]
2014-01-20 6:15 ` [PATCH V3] " Adrian Hunter
2014-01-20 6:18 ` Adrian Hunter
2014-01-20 15:38 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52D39A7C.4070002@intel.com \
--to=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).