linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Chris Ball <cjb@laptop.org>, Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>
Subject: Re: [PATCH V3] mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
Date: Mon, 20 Jan 2014 08:18:23 +0200	[thread overview]
Message-ID: <52DCBFAF.9060001@intel.com> (raw)
In-Reply-To: <52DCBF06.1000202@intel.com>

+ chris@printf.net

On 20/01/14 08:15, Adrian Hunter wrote:
> Ping?
> 
> On 13/01/14 09:49, Adrian Hunter wrote:
>> A host controller for a SD card may need a GPIO
>> for card detect in order to wake up from runtime
>> suspend when a card is inserted.  If that GPIO is
>> not configured, then the host controller will not
>> wake up.  Fix that for the affected devices by not
>> enabling runtime PM unless the GPIO is successfully
>> set up.
>>
>> This affects BYT sd card host controller which had
>> runtime PM enabled from v3.11.  For completeness,
>> the MFD sd card host controller is flagged also.
>>
>> The original patch before rebasing (see link below)
>> was tested on v3.11.10 and v3.12.4 although the
>> patch applied with some offsets and fuzz.  The
>> original patch is here:
>>
>>     http://marc.info/?l=linux-mmc&m=138676702327057) was tested on v3.11.10 and v3.12.4
>>
>> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
>> ---
>>
>> V3: Update comments to reflect that the original patch
>> applies to stable trees whereas the rebased patch does
>> not.
>>
>> V2: Rebased
>>
>>  drivers/mmc/host/sdhci-pci.c | 10 ++++++++++
>>  drivers/mmc/host/sdhci-pci.h |  1 +
>>  2 files changed, 11 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
>> index c1a7f31..d520366 100644
>> --- a/drivers/mmc/host/sdhci-pci.c
>> +++ b/drivers/mmc/host/sdhci-pci.c
>> @@ -225,6 +225,7 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
>>  static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
>>  	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
>>  	.allow_runtime_pm = true,
>> +	.own_cd_for_runtime_pm = true,
>>  };
>>  
>>  static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
>> @@ -289,6 +290,7 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
>>  static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
>>  	.quirks2	= SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
>>  	.allow_runtime_pm = true,
>> +	.own_cd_for_runtime_pm = true,
>>  };
>>  
>>  /* Define Host controllers for Intel Merrifield platform */
>> @@ -1370,6 +1372,14 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
>>  
>>  	sdhci_pci_add_own_cd(slot);
>>  
>> +	/*
>> +	 * Check if the chip needs a separate GPIO for card detect to wake up
>> +	 * from runtime suspend.  If it is not there, don't allow runtime PM.
>> +	 * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
>> +	 */
>> +	if (chip->fixes->own_cd_for_runtime_pm && !gpio_is_valid(slot->cd_gpio))
>> +		chip->allow_runtime_pm = false;
>> +
>>  	return slot;
>>  
>>  remove:
>> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
>> index 0347804..6d71871 100644
>> --- a/drivers/mmc/host/sdhci-pci.h
>> +++ b/drivers/mmc/host/sdhci-pci.h
>> @@ -39,6 +39,7 @@ struct sdhci_pci_fixes {
>>  	unsigned int		quirks;
>>  	unsigned int		quirks2;
>>  	bool			allow_runtime_pm;
>> +	bool			own_cd_for_runtime_pm;
>>  
>>  	int			(*probe) (struct sdhci_pci_chip *);
>>  
>>
> 
> 
> 


  reply	other threads:[~2014-01-20  6:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1386764492-26444-1-git-send-email-adrian.hunter@intel.com>
2013-12-11 12:43 ` [PATCH RESEND] mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend Adrian Hunter
2014-01-13  7:32 ` [PATCH V2 " Adrian Hunter
2014-01-13  7:49   ` [PATCH V3] " Adrian Hunter
2014-01-20  6:15     ` Adrian Hunter
2014-01-20  6:18       ` Adrian Hunter [this message]
2014-01-20 15:38     ` Chris Ball

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52DCBFAF.9060001@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=chris@printf.net \
    --cc=cjb@laptop.org \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).