From: Jaehoon Chung <jh80.chung@samsung.com>
To: Jaehoon Chung <jh80.chung@samsung.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Chris Ball <chris@printf.net>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Subject: Re: [PATCH 1/6] mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
Date: Fri, 14 Mar 2014 10:25:42 +0900 [thread overview]
Message-ID: <53225A96.6080606@samsung.com> (raw)
In-Reply-To: <5321B4FA.6000305@samsung.com>
After applied "[PATCH 1/6]~[PATCH 3/6]", I have tested on exynos board.
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
On 03/13/2014 10:39 PM, Jaehoon Chung wrote:
> Hi, Adrian.
>
> Thanks for kindly explanation.
>
> Best Regards,
> Jaehoon Chung
>
> On 03/13/2014 10:33 PM, Adrian Hunter wrote:
>> On 13.03.2014 15:00, Jaehoon Chung wrote:
>>> Dear Adrain.
>>>
>>> I have tested with your patch-set related slot-gpio.
>>> It's working fine. And looks good to me.
>>>
>>> I have a question. what's override_cd/ro_active_level?
>>> I didn't fully understand this value. Could you explain to me, plz?
>>
>> The gpio descriptor records whether the gpio is active high or active low.
>> When using gpiod_get_value_cansleep() the value is inverted on that basis.
>> When using gpiod_get_raw_value_cansleep() the value is not inverted.
>>
>> The legacy GPIO API did not record active low/high. So then we use
>> gpiod_get_raw_value_cansleep(). The new API should be able to use
>> gpiod_get_value_cansleep().
>>
>> In addition, for the device that I have the active high/low
>> information passed by ACPI is wrong anyway, so I also have to use the
>> override flag.
>>
>>
>>>
>>> Best Regards,
>>> Jaehoon Chung
>>>
>>> On 03/10/2014 10:02 PM, Adrian Hunter wrote:
>>>> In preparation for adding a descriptor-based CD GPIO
>>>> API, switch from recording GPIO numbers to recording
>>>> GPIO descriptors.
>>>>
>>>> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
>>>> ---
>>>> drivers/mmc/core/slot-gpio.c | 45 ++++++++++++++++++++++++++------------------
>>>> 1 file changed, 27 insertions(+), 18 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
>>>> index 46596b71..86547a2 100644
>>>> --- a/drivers/mmc/core/slot-gpio.c
>>>> +++ b/drivers/mmc/core/slot-gpio.c
>>>> @@ -10,6 +10,7 @@
>>>>
>>>> #include <linux/err.h>
>>>> #include <linux/gpio.h>
>>>> +#include <linux/gpio/consumer.h>
>>>> #include <linux/interrupt.h>
>>>> #include <linux/jiffies.h>
>>>> #include <linux/mmc/host.h>
>>>> @@ -18,8 +19,10 @@
>>>> #include <linux/slab.h>
>>>>
>>>> struct mmc_gpio {
>>>> - int ro_gpio;
>>>> - int cd_gpio;
>>>> + struct gpio_desc *ro_gpio;
>>>> + struct gpio_desc *cd_gpio;
>>>> + bool override_ro_active_level;
>>>> + bool override_cd_active_level;
>>>> char *ro_label;
>>>> char cd_label[0];
>>>> };
>>>> @@ -57,8 +60,6 @@ static int mmc_gpio_alloc(struct mmc_host *host)
>>>> ctx->ro_label = ctx->cd_label + len;
>>>> snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
>>>> snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
>>>> - ctx->cd_gpio = -EINVAL;
>>>> - ctx->ro_gpio = -EINVAL;
>>>> host->slot.handler_priv = ctx;
>>>> }
>>>> }
>>>> @@ -72,11 +73,14 @@ int mmc_gpio_get_ro(struct mmc_host *host)
>>>> {
>>>> struct mmc_gpio *ctx = host->slot.handler_priv;
>>>>
>>>> - if (!ctx || !gpio_is_valid(ctx->ro_gpio))
>>>> + if (!ctx || !ctx->ro_gpio)
>>>> return -ENOSYS;
>>>>
>>>> - return !gpio_get_value_cansleep(ctx->ro_gpio) ^
>>>> - !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
>>>> + if (ctx->override_ro_active_level)
>>>> + return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^
>>>> + !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
>>>> +
>>>> + return gpiod_get_value_cansleep(ctx->ro_gpio);
>>>> }
>>>> EXPORT_SYMBOL(mmc_gpio_get_ro);
>>>>
>>>> @@ -84,11 +88,14 @@ int mmc_gpio_get_cd(struct mmc_host *host)
>>>> {
>>>> struct mmc_gpio *ctx = host->slot.handler_priv;
>>>>
>>>> - if (!ctx || !gpio_is_valid(ctx->cd_gpio))
>>>> + if (!ctx || !ctx->cd_gpio)
>>>> return -ENOSYS;
>>>>
>>>> - return !gpio_get_value_cansleep(ctx->cd_gpio) ^
>>>> - !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
>>>> + if (ctx->override_cd_active_level)
>>>> + return !gpiod_get_raw_value_cansleep(ctx->cd_gpio) ^
>>>> + !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
>>>> +
>>>> + return gpiod_get_value_cansleep(ctx->cd_gpio);
>>>> }
>>>> EXPORT_SYMBOL(mmc_gpio_get_cd);
>>>>
>>>> @@ -125,7 +132,8 @@ int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
>>>> if (ret < 0)
>>>> return ret;
>>>>
>>>> - ctx->ro_gpio = gpio;
>>>> + ctx->override_ro_active_level = true;
>>>> + ctx->ro_gpio = gpio_to_desc(gpio);
>>>>
>>>> return 0;
>>>> }
>>>> @@ -201,7 +209,8 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
>>>> if (irq < 0)
>>>> host->caps |= MMC_CAP_NEEDS_POLL;
>>>>
>>>> - ctx->cd_gpio = gpio;
>>>> + ctx->override_cd_active_level = true;
>>>> + ctx->cd_gpio = gpio_to_desc(gpio);
>>>>
>>>> return 0;
>>>> }
>>>> @@ -219,11 +228,11 @@ void mmc_gpio_free_ro(struct mmc_host *host)
>>>> struct mmc_gpio *ctx = host->slot.handler_priv;
>>>> int gpio;
>>>>
>>>> - if (!ctx || !gpio_is_valid(ctx->ro_gpio))
>>>> + if (!ctx || !ctx->ro_gpio)
>>>> return;
>>>>
>>>> - gpio = ctx->ro_gpio;
>>>> - ctx->ro_gpio = -EINVAL;
>>>> + gpio = desc_to_gpio(ctx->ro_gpio);
>>>> + ctx->ro_gpio = NULL;
>>>>
>>>> devm_gpio_free(&host->class_dev, gpio);
>>>> }
>>>> @@ -241,7 +250,7 @@ void mmc_gpio_free_cd(struct mmc_host *host)
>>>> struct mmc_gpio *ctx = host->slot.handler_priv;
>>>> int gpio;
>>>>
>>>> - if (!ctx || !gpio_is_valid(ctx->cd_gpio))
>>>> + if (!ctx || !ctx->cd_gpio)
>>>> return;
>>>>
>>>> if (host->slot.cd_irq >= 0) {
>>>> @@ -249,8 +258,8 @@ void mmc_gpio_free_cd(struct mmc_host *host)
>>>> host->slot.cd_irq = -EINVAL;
>>>> }
>>>>
>>>> - gpio = ctx->cd_gpio;
>>>> - ctx->cd_gpio = -EINVAL;
>>>> + gpio = desc_to_gpio(ctx->cd_gpio);
>>>> + ctx->cd_gpio = NULL;
>>>>
>>>> devm_gpio_free(&host->class_dev, gpio);
>>>> }
>>>>
>>>
>>>
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-03-14 1:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-10 13:02 [PATCH 0/6] mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 Adrian Hunter
2014-03-10 13:02 ` [PATCH 1/6] mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Adrian Hunter
2014-03-13 13:00 ` Jaehoon Chung
2014-03-13 13:33 ` Adrian Hunter
2014-03-13 13:39 ` Jaehoon Chung
2014-03-14 1:25 ` Jaehoon Chung [this message]
2014-03-14 9:06 ` Linus Walleij
2014-03-14 10:23 ` Adrian Hunter
2014-03-14 10:28 ` Adrian Hunter
2014-03-10 13:02 ` [PATCH 2/6] mmc: slot-gpio: Split out CD IRQ request into a separate function Adrian Hunter
2014-03-10 13:02 ` [PATCH 3/6] mmc: slot-gpio: Add GPIO descriptor based CD GPIO API Adrian Hunter
2014-03-14 9:07 ` Linus Walleij
2014-03-10 13:02 ` [PATCH 4/6] mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 Adrian Hunter
2014-03-10 13:02 ` [PATCH 5/6] mmc: sdhci-acpi: Add device id 80860F16 Adrian Hunter
2014-03-10 13:02 ` [PATCH 6/6] mmc: sdhci: Allow for irq being shared Adrian Hunter
2014-03-11 8:09 ` [PATCH V2 " Adrian Hunter
2014-03-17 9:14 ` [PATCH 0/6] mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 Adrian Hunter
2014-03-17 13:14 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53225A96.6080606@samsung.com \
--to=jh80.chung@samsung.com \
--cc=adrian.hunter@intel.com \
--cc=chris@printf.net \
--cc=g.liakhovetski@gmx.de \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).