Re: [PATCH] mmc: sdhci: don't read cd-gpio while holding spinlock

[Adrian Hunter <adrian.hunter@intel.com>]

On 20.03.2014 20:47, Andrew Bresticker wrote:
> mmc_request() reads the cd-gpio via mmc_gpio_get_cd(), which can sleep,
> while holding host->lock.  This may result in the following BUG:
> 
>   BUG: spinlock wrong CPU on CPU#2, kworker/u8:16/4296
>   lock: 0xea6b9c80, .magic: dead4ead, .owner: kworker/u8:16/4296, .owner_cpu: 0
>   CPU: 2 PID: 4296 Comm: kworker/u8:16 Tainted: G         C   3.10.18 #137
>   Workqueue: kmmcd mmc_rescan
>   [<8020cf8c>] (unwind_backtrace+0x0/0x118) from [<8020a0c8>] (show_stack+0x20/0x24)
>   [<8020a0c8>] (show_stack+0x20/0x24) from [<8075e5b8>] (dump_stack+0x20/0x28)
>   [<8075e5b8>] (dump_stack+0x20/0x28) from [<804184a8>] (spin_dump+0x80/0x94)
>   [<804184a8>] (spin_dump+0x80/0x94) from [<804184e8>] (spin_bug+0x2c/0x30)
>   [<804184e8>] (spin_bug+0x2c/0x30) from [<80418790>] (do_raw_spin_unlock+0x94/0xd4)
>   [<80418790>] (do_raw_spin_unlock+0x94/0xd4) from [<80761a44>] (_raw_spin_unlock_irqrestore+0x1c/0x24)
>   [<80761a44>] (_raw_spin_unlock_irqrestore+0x1c/0x24) from [<805ff66c>] (sdhci_request+0x1c8/0x1d0)
>   [<805ff66c>] (sdhci_request+0x1c8/0x1d0) from [<805ebb5c>] (mmc_start_request+0xec/0xf4)
>   [<805ebb5c>] (mmc_start_request+0xec/0xf4) from [<805ebcbc>] (mmc_wait_for_req+0x80/0xf4)
>   ...
> 
> Read the cd-gpio before acquiring the spinlock instead.

The same problem appears to be in sdhci_card_event() which calls
sdhci_do_get_cd() under spinlock which then calls mmc_gpio_get_cd()

Will you fix that too?


> 
> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
> ---
>  drivers/mmc/host/sdhci.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 04a5e25..f2ef978 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1340,6 +1340,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
>  	u32 tuning_opcode;
>  
>  	host = mmc_priv(mmc);
> +	present = mmc_gpio_get_cd(host->mmc);
>  
>  	sdhci_runtime_pm_get(host);
>  
> @@ -1371,7 +1372,6 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
>  	 *     zero: cd-gpio is used, and card is removed
>  	 *     one: cd-gpio is used, and card is present
>  	 */
> -	present = mmc_gpio_get_cd(host->mmc);
>  	if (present < 0) {
>  		/* If polling, assume that the card is always present. */
>  		if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
>