From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Pramod Gurav <pramod.gurav@smartplayin.com>, pramod.gurav.etc@gmail.com
Cc: David Brown <davidb@codeaurora.org>,
Daniel Walker <dwalker@fifo99.com>,
Bryan Huntsman <bryanh@codeaurora.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 1/5] mmc: msm_sdcc: Switch to using managed resources
Date: Tue, 16 Sep 2014 23:11:49 +0100 [thread overview]
Message-ID: <5418B5A5.9000400@linaro.org> (raw)
In-Reply-To: <1410866146-15144-2-git-send-email-pramod.gurav@smartplayin.com>
Hi Pramod,
Thankyou for the patches.
You should be aware that this driver is due to be *Removed* very soon.
Basically msm_sdcc is a hacked version of mmci driver.
From v3.17 mmci driver added support for qualcomm specific
customization to pl180.
So msm platform should be able to use pl180 mmci driver, rather than
using msm_sdcc.
Thanks,
srini
On 16/09/14 12:15, Pramod Gurav wrote:
> This change makes changes to use managed version of ioremap, clk_get,
> request_irq etc for clean unloading of modules. This does away with
> lables to release these resources.
>
> Cc: David Brown <davidb@codeaurora.org>
> Cc: Daniel Walker <dwalker@fifo99.com>
> Cc: Bryan Huntsman <bryanh@codeaurora.org>
> CC: Ulf Hansson <ulf.hansson@linaro.org>
> CC: linux-mmc@vger.kernel.org
> CC: linux-arm-msm@vger.kernel.org
> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
> ---
> drivers/mmc/host/msm_sdcc.c | 43 +++++++++++++++++--------------------------
> 1 file changed, 17 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
> index 9405ecd..2b8ac9c 100644
> --- a/drivers/mmc/host/msm_sdcc.c
> +++ b/drivers/mmc/host/msm_sdcc.c
> @@ -1224,7 +1224,7 @@ msmsdcc_probe(struct platform_device *pdev)
>
> host->cmdpoll = 1;
>
> - host->base = ioremap(memres->start, PAGE_SIZE);
> + host->base = devm_ioremap(&pdev->dev, memres->start, PAGE_SIZE);
> if (!host->base) {
> ret = -ENOMEM;
> goto host_free;
> @@ -1244,33 +1244,33 @@ msmsdcc_probe(struct platform_device *pdev)
> if (host->dmares) {
> ret = msmsdcc_init_dma(host);
> if (ret)
> - goto ioremap_free;
> + goto tasklet_kill;
> } else {
> host->dma.channel = -1;
> }
>
> /* Get our clocks */
> - host->pclk = clk_get(&pdev->dev, "sdc_pclk");
> + host->pclk = devm_clk_get(&pdev->dev, "sdc_pclk");
> if (IS_ERR(host->pclk)) {
> ret = PTR_ERR(host->pclk);
> goto dma_free;
> }
>
> - host->clk = clk_get(&pdev->dev, "sdc_clk");
> + host->clk = devm_clk_get(&pdev->dev, "sdc_clk");
> if (IS_ERR(host->clk)) {
> ret = PTR_ERR(host->clk);
> - goto pclk_put;
> + goto dma_free;
> }
>
> ret = clk_set_rate(host->clk, msmsdcc_fmin);
> if (ret) {
> pr_err("%s: Clock rate set failed (%d)\n", __func__, ret);
> - goto clk_put;
> + goto dma_free;
> }
>
> ret = clk_prepare(host->pclk);
> if (ret)
> - goto clk_put;
> + goto dma_free;
>
> ret = clk_prepare(host->clk);
> if (ret)
> @@ -1322,7 +1322,7 @@ msmsdcc_probe(struct platform_device *pdev)
> (stat_irqres->flags & IRQF_TRIGGER_MASK);
>
> host->stat_irq = stat_irqres->start;
> - ret = request_irq(host->stat_irq,
> + ret = devm_request_irq(&pdev->dev, host->stat_irq,
> msmsdcc_platform_status_irq,
> irqflags,
> DRIVER_NAME " (slot)",
> @@ -1350,15 +1350,15 @@ msmsdcc_probe(struct platform_device *pdev)
> host->eject = !host->oldstat;
> }
>
> - ret = request_irq(cmd_irqres->start, msmsdcc_irq, IRQF_SHARED,
> - DRIVER_NAME " (cmd)", host);
> + ret = devm_request_irq(&pdev->dev, cmd_irqres->start, msmsdcc_irq,
> + IRQF_SHARED, DRIVER_NAME " (cmd)", host);
> if (ret)
> - goto stat_irq_free;
> + goto clk_disable;
>
> - ret = request_irq(cmd_irqres->start, msmsdcc_pio_irq, IRQF_SHARED,
> - DRIVER_NAME " (pio)", host);
> + ret = devm_request_irq(&pdev->dev, cmd_irqres->start, msmsdcc_pio_irq,
> + IRQF_SHARED, DRIVER_NAME " (pio)", host);
> if (ret)
> - goto cmd_irq_free;
> + goto clk_disable;
>
> mmc_set_drvdata(pdev, mmc);
> mmc_add_host(mmc);
> @@ -1387,28 +1387,19 @@ msmsdcc_probe(struct platform_device *pdev)
> pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc));
>
> return 0;
> - cmd_irq_free:
> - free_irq(cmd_irqres->start, host);
> - stat_irq_free:
> - if (host->stat_irq)
> - free_irq(host->stat_irq, host);
> +
> clk_disable:
> msmsdcc_disable_clocks(host, 0);
> clk_unprepare:
> clk_unprepare(host->clk);
> clk_unprepare_p:
> clk_unprepare(host->pclk);
> - clk_put:
> - clk_put(host->clk);
> - pclk_put:
> - clk_put(host->pclk);
> -dma_free:
> + dma_free:
> if (host->dmares)
> dma_free_coherent(NULL, sizeof(struct msmsdcc_nc_dmadata),
> host->dma.nc, host->dma.nc_busaddr);
> -ioremap_free:
> + tasklet_kill:
> tasklet_kill(&host->dma_tlet);
> - iounmap(host->base);
> host_free:
> mmc_free_host(mmc);
> out:
>
next prev parent reply other threads:[~2014-09-16 22:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1410866146-15144-1-git-send-email-pramod.gurav@smartplayin.com>
2014-09-16 11:15 ` [PATCH 1/5] mmc: msm_sdcc: Switch to using managed resources Pramod Gurav
2014-09-16 22:11 ` Srinivas Kandagatla [this message]
2014-09-17 5:43 ` Pramod Gurav
[not found] <1410866268-15185-1-git-send-email-pramod.gurav@smartplayin.com>
2014-09-16 11:17 ` Pramod Gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5418B5A5.9000400@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=bryanh@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=pramod.gurav.etc@gmail.com \
--cc=pramod.gurav@smartplayin.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox