* [PATCH 1/7] mmc: sdhci: Add quirk for always getting TC with stop cmd
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-24 7:27 ` [PATCH 2/7] mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers Adrian Hunter
` (7 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Add a quirk for a host controller that always sets
a Transfer Complete interrupt status for the stop
command even when a busy response is not indicated.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci.c | 8 ++++++--
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7a8586f..abad5e5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2224,7 +2224,7 @@ static void sdhci_tuning_timer(unsigned long data)
* *
\*****************************************************************************/
-static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
+static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
{
BUG_ON(intmask == 0);
@@ -2271,6 +2271,9 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
/* The controller does not support the end-of-busy IRQ,
* fall through and take the SDHCI_INT_RESPONSE */
+ } else if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
+ host->cmd->opcode == MMC_STOP_TRANSMISSION && !host->data) {
+ *mask &= ~SDHCI_INT_DATA_END;
}
if (intmask & SDHCI_INT_RESPONSE)
@@ -2481,7 +2484,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
}
if (intmask & SDHCI_INT_CMD_MASK)
- sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK,
+ &intmask);
if (intmask & SDHCI_INT_DATA_MASK)
sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 0aa85ca..dba793e 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -98,6 +98,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
/* Controller does not support DDR50 */
#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
+/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
+#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 2/7] mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
2014-09-24 7:27 ` [PATCH 1/7] mmc: sdhci: Add quirk for always getting TC with stop cmd Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-24 7:27 ` [PATCH 3/7] mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller Adrian Hunter
` (6 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Add quirk SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-acpi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 3483c08..1bc92c6 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -175,7 +175,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC,
.probe_slot = sdhci_acpi_emmc_probe_slot,
};
@@ -191,7 +191,8 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
SDHCI_ACPI_RUNTIME_PM,
- .quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
+ .quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
+ SDHCI_QUIRK2_STOP_WITH_TC,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 3/7] mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
2014-09-24 7:27 ` [PATCH 1/7] mmc: sdhci: Add quirk for always getting TC with stop cmd Adrian Hunter
2014-09-24 7:27 ` [PATCH 2/7] mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-24 7:27 ` [PATCH 4/7] mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers Adrian Hunter
` (5 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Add a HID (INT33BB) and UID (3) for a SD Card host controller.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-acpi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 1bc92c6..c38f089 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -207,6 +207,7 @@ static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
{ "80860F14" , "3" , &sdhci_acpi_slot_int_sd },
{ "80860F16" , NULL, &sdhci_acpi_slot_int_sd },
{ "INT33BB" , "2" , &sdhci_acpi_slot_int_sdio },
+ { "INT33BB" , "3" , &sdhci_acpi_slot_int_sd },
{ "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio },
{ "INT3436" , NULL, &sdhci_acpi_slot_int_sdio },
{ "PNP0D40" },
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 4/7] mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
` (2 preceding siblings ...)
2014-09-24 7:27 ` [PATCH 3/7] mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-24 7:27 ` [PATCH 5/7] mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect Adrian Hunter
` (4 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Add quirk SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 580073b..31181d8 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -283,7 +283,8 @@ static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
.allow_runtime_pm = true,
.probe_slot = byt_emmc_probe_slot,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_STOP_WITH_TC,
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
@@ -295,7 +296,8 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
- SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_STOP_WITH_TC,
.allow_runtime_pm = true,
.own_cd_for_runtime_pm = true,
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 5/7] mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
` (3 preceding siblings ...)
2014-09-24 7:27 ` [PATCH 4/7] mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-24 7:27 ` [PATCH 6/7] mmc: sdhci: Let a driver override timeout clock frequency Adrian Hunter
` (3 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Add support for card detect for Bay Trail
and Braswell SD Card host controllers in PCI
mode.
This uses the gpio descriptor API which can find
gpio descriptors, for example, on an ACPI comapnion
device.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 20 +++++++++++++++++++-
drivers/mmc/host/sdhci-pci.h | 4 ++++
2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 31181d8..39499fb 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/mmc/sdhci-pci-data.h>
#include "sdhci.h"
@@ -280,6 +281,14 @@ static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
return 0;
}
+static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
+{
+ slot->cd_con_id = NULL;
+ slot->cd_idx = 0;
+ slot->cd_override_level = true;
+ return 0;
+}
+
static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
.allow_runtime_pm = true,
.probe_slot = byt_emmc_probe_slot,
@@ -300,6 +309,7 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
SDHCI_QUIRK2_STOP_WITH_TC,
.allow_runtime_pm = true,
.own_cd_for_runtime_pm = true,
+ .probe_slot = byt_sd_probe_slot,
};
/* Define Host controllers for Intel Merrifield platform */
@@ -1354,6 +1364,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
slot->pci_bar = bar;
slot->rst_n_gpio = -EINVAL;
slot->cd_gpio = -EINVAL;
+ slot->cd_idx = -1;
/* Retrieve platform data if there is any */
if (*sdhci_pci_get_data)
@@ -1412,6 +1423,13 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
host->mmc->slotno = slotno;
host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
+ if (slot->cd_idx >= 0 &&
+ mmc_gpiod_request_cd(host->mmc, slot->cd_con_id, slot->cd_idx,
+ slot->cd_override_level, 0)) {
+ dev_warn(&pdev->dev, "failed to setup card detect gpio\n");
+ slot->cd_idx = -1;
+ }
+
ret = sdhci_add_host(host);
if (ret)
goto remove;
@@ -1424,7 +1442,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
* Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
*/
if (chip->fixes && chip->fixes->own_cd_for_runtime_pm &&
- !gpio_is_valid(slot->cd_gpio))
+ !gpio_is_valid(slot->cd_gpio) && slot->cd_idx < 0)
chip->allow_runtime_pm = false;
return slot;
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 9c1909b..d57c3d1 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -64,6 +64,10 @@ struct sdhci_pci_slot {
int cd_gpio;
int cd_irq;
+ char *cd_con_id;
+ int cd_idx;
+ bool cd_override_level;
+
void (*hw_reset)(struct sdhci_host *host);
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 6/7] mmc: sdhci: Let a driver override timeout clock frequency
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
` (4 preceding siblings ...)
2014-09-24 7:27 ` [PATCH 5/7] mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-24 7:27 ` [PATCH 7/7] mmc: sdhci-pci: Fix Braswell eMMC " Adrian Hunter
` (2 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Let a driver override the timeout clock frequency by
populating it before calling sdhci_add_host(). Note
the value will otherwise be zero because sdhci_host is
zeroed when allocated.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index abad5e5..6ada726 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2791,6 +2791,7 @@ int sdhci_add_host(struct sdhci_host *host)
u32 caps[2] = {0, 0};
u32 max_current_caps;
unsigned int ocr_avail;
+ unsigned int override_timeout_clk;
int ret;
WARN_ON(host == NULL);
@@ -2804,6 +2805,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (debug_quirks2)
host->quirks2 = debug_quirks2;
+ override_timeout_clk = host->timeout_clk;
+
sdhci_do_reset(host, SDHCI_RESET_ALL);
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
@@ -2972,6 +2975,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->max_busy_timeout /= host->timeout_clk;
}
+ if (override_timeout_clk)
+ host->timeout_clk = override_timeout_clk;
+
mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 7/7] mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
` (5 preceding siblings ...)
2014-09-24 7:27 ` [PATCH 6/7] mmc: sdhci: Let a driver override timeout clock frequency Adrian Hunter
@ 2014-09-24 7:27 ` Adrian Hunter
2014-09-30 12:03 ` [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
2014-10-03 12:57 ` Ulf Hansson
8 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-09-24 7:27 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Braswell eMMC host controller specifies an incorrect
timeout clock frequncy in the capabilities registers.
The correct value is 1 MHz.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 39499fb..9e791e9 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -272,6 +272,8 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
+ slot->host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */
return 0;
}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 0/7] mmc: Some Braswell patches
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
` (6 preceding siblings ...)
2014-09-24 7:27 ` [PATCH 7/7] mmc: sdhci-pci: Fix Braswell eMMC " Adrian Hunter
@ 2014-09-30 12:03 ` Adrian Hunter
2014-10-02 5:04 ` Adrian Hunter
2014-10-03 12:57 ` Ulf Hansson
8 siblings, 1 reply; 12+ messages in thread
From: Adrian Hunter @ 2014-09-30 12:03 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Hi
Any comments on these?
On 24/09/14 10:27, Adrian Hunter wrote:
> Hi
>
> Here are some patches to further support for Intel Braswell
> SoC.
>
>
> Adrian Hunter (7):
> mmc: sdhci: Add quirk for always getting TC with stop cmd
> mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
> mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
> mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
> mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
> mmc: sdhci: Let a driver override timeout clock frequency
> mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
>
> drivers/mmc/host/sdhci-acpi.c | 6 ++++--
> drivers/mmc/host/sdhci-pci.c | 28 +++++++++++++++++++++++++---
> drivers/mmc/host/sdhci-pci.h | 4 ++++
> drivers/mmc/host/sdhci.c | 14 ++++++++++++--
> include/linux/mmc/sdhci.h | 2 ++
> 5 files changed, 47 insertions(+), 7 deletions(-)
>
>
> Regards
> Adrian
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 0/7] mmc: Some Braswell patches
2014-09-30 12:03 ` [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
@ 2014-10-02 5:04 ` Adrian Hunter
0 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-10-02 5:04 UTC (permalink / raw)
To: Ulf Hansson, Chris Ball; +Cc: linux-mmc
Ping?
On 30/09/14 15:03, Adrian Hunter wrote:
> Hi
>
> Any comments on these?
>
>
> On 24/09/14 10:27, Adrian Hunter wrote:
>> Hi
>>
>> Here are some patches to further support for Intel Braswell
>> SoC.
>>
>>
>> Adrian Hunter (7):
>> mmc: sdhci: Add quirk for always getting TC with stop cmd
>> mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
>> mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
>> mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
>> mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
>> mmc: sdhci: Let a driver override timeout clock frequency
>> mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
>>
>> drivers/mmc/host/sdhci-acpi.c | 6 ++++--
>> drivers/mmc/host/sdhci-pci.c | 28 +++++++++++++++++++++++++---
>> drivers/mmc/host/sdhci-pci.h | 4 ++++
>> drivers/mmc/host/sdhci.c | 14 ++++++++++++--
>> include/linux/mmc/sdhci.h | 2 ++
>> 5 files changed, 47 insertions(+), 7 deletions(-)
>>
>>
>> Regards
>> Adrian
>
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/7] mmc: Some Braswell patches
2014-09-24 7:27 [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
` (7 preceding siblings ...)
2014-09-30 12:03 ` [PATCH 0/7] mmc: Some Braswell patches Adrian Hunter
@ 2014-10-03 12:57 ` Ulf Hansson
2014-10-03 12:58 ` Adrian Hunter
8 siblings, 1 reply; 12+ messages in thread
From: Ulf Hansson @ 2014-10-03 12:57 UTC (permalink / raw)
To: Adrian Hunter; +Cc: Chris Ball, linux-mmc
On 24 September 2014 09:27, Adrian Hunter <adrian.hunter@intel.com> wrote:
> Hi
>
> Here are some patches to further support for Intel Braswell
> SoC.
>
>
> Adrian Hunter (7):
> mmc: sdhci: Add quirk for always getting TC with stop cmd
> mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
> mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
> mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
> mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
> mmc: sdhci: Let a driver override timeout clock frequency
> mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
>
> drivers/mmc/host/sdhci-acpi.c | 6 ++++--
> drivers/mmc/host/sdhci-pci.c | 28 +++++++++++++++++++++++++---
> drivers/mmc/host/sdhci-pci.h | 4 ++++
> drivers/mmc/host/sdhci.c | 14 ++++++++++++--
> include/linux/mmc/sdhci.h | 2 ++
> 5 files changed, 47 insertions(+), 7 deletions(-)
>
>
Thanks! Applied for next. It required a minor fix for patch 5, since
the mmc_gpiod_request_cd() now takes one more parameter.
Kind regards
Uffe
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 0/7] mmc: Some Braswell patches
2014-10-03 12:57 ` Ulf Hansson
@ 2014-10-03 12:58 ` Adrian Hunter
0 siblings, 0 replies; 12+ messages in thread
From: Adrian Hunter @ 2014-10-03 12:58 UTC (permalink / raw)
To: Ulf Hansson; +Cc: Chris Ball, linux-mmc
On 03/10/14 15:57, Ulf Hansson wrote:
> On 24 September 2014 09:27, Adrian Hunter <adrian.hunter@intel.com> wrote:
>> Hi
>>
>> Here are some patches to further support for Intel Braswell
>> SoC.
>>
>>
>> Adrian Hunter (7):
>> mmc: sdhci: Add quirk for always getting TC with stop cmd
>> mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers
>> mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller
>> mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers
>> mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect
>> mmc: sdhci: Let a driver override timeout clock frequency
>> mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency
>>
>> drivers/mmc/host/sdhci-acpi.c | 6 ++++--
>> drivers/mmc/host/sdhci-pci.c | 28 +++++++++++++++++++++++++---
>> drivers/mmc/host/sdhci-pci.h | 4 ++++
>> drivers/mmc/host/sdhci.c | 14 ++++++++++++--
>> include/linux/mmc/sdhci.h | 2 ++
>> 5 files changed, 47 insertions(+), 7 deletions(-)
>>
>>
>
> Thanks! Applied for next. It required a minor fix for patch 5, since
> the mmc_gpiod_request_cd() now takes one more parameter.
Thank you!
^ permalink raw reply [flat|nested] 12+ messages in thread