From: Jaehoon Chung <jh80.chung@samsung.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, Chris Ball <chris@printf.net>
Cc: Seungwon Jeon <tgih.jun@samsung.com>,
Stephen Boyd <sboyd@codeaurora.org>
Subject: Re: [PATCH V3 1/2] mmc: dw_mmc: Convert to mmc_send_tuning()
Date: Wed, 24 Dec 2014 10:44:59 +0900 [thread overview]
Message-ID: <549A1A9B.8060106@samsung.com> (raw)
In-Reply-To: <1419350569-7238-1-git-send-email-ulf.hansson@linaro.org>
Hi, Ulf.
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
And if you can apply "[PATCH] mmc: dw_mmc: Generate stop commands for failed tuning requests", plz do it with my-ack.
Best Regards,
Jaehoon Chung
On 12/24/2014 01:02 AM, Ulf Hansson wrote:
> Instead of having a local hack taking care of sending the tuning
> command and as well to verify the response pattern, let's convert to
> the common mmc_send_tuning() API.
>
> This change affects the Exynos variant, since it's the only one which
> support the dw_mmc's ->execute_tuning() callback.
>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
>
> Changes in v3:
> Fix return value from dw_mci_exynos_execute_tuning() according to
> comment from Jaehoon Chung.
>
> ---
> drivers/mmc/host/dw_mmc-exynos.c | 48 +++-------------------------------------
> drivers/mmc/host/dw_mmc.c | 22 +-----------------
> drivers/mmc/host/dw_mmc.h | 8 +------
> 3 files changed, 5 insertions(+), 73 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
> index 74eb081..12a5eaa 100644
> --- a/drivers/mmc/host/dw_mmc-exynos.c
> +++ b/drivers/mmc/host/dw_mmc-exynos.c
> @@ -340,64 +340,23 @@ out:
> return loc;
> }
>
> -static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
> - struct dw_mci_tuning_data *tuning_data)
> +static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
> {
> struct dw_mci *host = slot->host;
> struct mmc_host *mmc = slot->mmc;
> - const u8 *blk_pattern = tuning_data->blk_pattern;
> - u8 *blk_test;
> - unsigned int blksz = tuning_data->blksz;
> u8 start_smpl, smpl, candiates = 0;
> s8 found = -1;
> int ret = 0;
>
> - blk_test = kmalloc(blksz, GFP_KERNEL);
> - if (!blk_test)
> - return -ENOMEM;
> -
> start_smpl = dw_mci_exynos_get_clksmpl(host);
>
> do {
> - struct mmc_request mrq = {NULL};
> - struct mmc_command cmd = {0};
> - struct mmc_command stop = {0};
> - struct mmc_data data = {0};
> - struct scatterlist sg;
> -
> - cmd.opcode = opcode;
> - cmd.arg = 0;
> - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
> -
> - stop.opcode = MMC_STOP_TRANSMISSION;
> - stop.arg = 0;
> - stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
> -
> - data.blksz = blksz;
> - data.blocks = 1;
> - data.flags = MMC_DATA_READ;
> - data.sg = &sg;
> - data.sg_len = 1;
> -
> - sg_init_one(&sg, blk_test, blksz);
> - mrq.cmd = &cmd;
> - mrq.stop = &stop;
> - mrq.data = &data;
> - host->mrq = &mrq;
> -
> mci_writel(host, TMOUT, ~0);
> smpl = dw_mci_exynos_move_next_clksmpl(host);
>
> - mmc_wait_for_req(mmc, &mrq);
> + if (!mmc_send_tuning(mmc))
> + candiates |= (1 << smpl);
>
> - if (!cmd.error && !data.error) {
> - if (!memcmp(blk_pattern, blk_test, blksz))
> - candiates |= (1 << smpl);
> - } else {
> - dev_dbg(host->dev,
> - "Tuning error: cmd.error:%d, data.error:%d\n",
> - cmd.error, data.error);
> - }
> } while (start_smpl != smpl);
>
> found = dw_mci_exynos_get_best_clksmpl(candiates);
> @@ -406,7 +365,6 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
> else
> ret = -EIO;
>
> - kfree(blk_test);
> return ret;
> }
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 6e4d864..88dc50f 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1312,30 +1312,10 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> struct dw_mci_slot *slot = mmc_priv(mmc);
> struct dw_mci *host = slot->host;
> const struct dw_mci_drv_data *drv_data = host->drv_data;
> - struct dw_mci_tuning_data tuning_data;
> int err = -ENOSYS;
>
> - if (opcode == MMC_SEND_TUNING_BLOCK_HS200) {
> - if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
> - tuning_data.blk_pattern = tuning_blk_pattern_8bit;
> - tuning_data.blksz = sizeof(tuning_blk_pattern_8bit);
> - } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
> - tuning_data.blk_pattern = tuning_blk_pattern_4bit;
> - tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
> - } else {
> - return -EINVAL;
> - }
> - } else if (opcode == MMC_SEND_TUNING_BLOCK) {
> - tuning_data.blk_pattern = tuning_blk_pattern_4bit;
> - tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
> - } else {
> - dev_err(host->dev,
> - "Undefined command(%d) for tuning\n", opcode);
> - return -EINVAL;
> - }
> -
> if (drv_data && drv_data->execute_tuning)
> - err = drv_data->execute_tuning(slot, opcode, &tuning_data);
> + err = drv_data->execute_tuning(slot);
> return err;
> }
>
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index d27d4c0..18c4afe 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -249,11 +249,6 @@ struct dw_mci_slot {
> int sdio_id;
> };
>
> -struct dw_mci_tuning_data {
> - const u8 *blk_pattern;
> - unsigned int blksz;
> -};
> -
> /**
> * dw_mci driver data - dw-mshc implementation specific driver data.
> * @caps: mmc subsystem specified capabilities of the controller(s).
> @@ -275,7 +270,6 @@ struct dw_mci_drv_data {
> void (*prepare_command)(struct dw_mci *host, u32 *cmdr);
> void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
> int (*parse_dt)(struct dw_mci *host);
> - int (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode,
> - struct dw_mci_tuning_data *tuning_data);
> + int (*execute_tuning)(struct dw_mci_slot *slot);
> };
> #endif /* _DW_MMC_H_ */
>
next prev parent reply other threads:[~2014-12-24 1:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 16:02 [PATCH V3 1/2] mmc: dw_mmc: Convert to mmc_send_tuning() Ulf Hansson
2014-12-23 16:02 ` [PATCH V3 2/2] mmc: core: Make tuning block patterns static Ulf Hansson
2014-12-24 1:45 ` Jaehoon Chung
2014-12-24 1:44 ` Jaehoon Chung [this message]
2014-12-24 14:11 ` [PATCH V3 1/2] mmc: dw_mmc: Convert to mmc_send_tuning() Alim Akhtar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=549A1A9B.8060106@samsung.com \
--to=jh80.chung@samsung.com \
--cc=chris@printf.net \
--cc=linux-mmc@vger.kernel.org \
--cc=sboyd@codeaurora.org \
--cc=tgih.jun@samsung.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox