linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: Alim Akhtar <alim.akhtar@samsung.com>, linux-mmc@vger.kernel.org
Cc: chris@printf.net, ulf.hansson@linaro.org, tgih.jun@samsung.com,
	dianders@chromium.org, alim.akhtar@gmail.com, kgene@kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, a.kesavan@samsung.com
Subject: Re: [PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
Date: Wed, 25 Feb 2015 15:35:16 +0900	[thread overview]
Message-ID: <54ED6D24.4000703@samsung.com> (raw)
In-Reply-To: <1422499318-13726-3-git-send-email-alim.akhtar@samsung.com>

Hi, Alim.

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

On 01/29/2015 11:41 AM, Alim Akhtar wrote:
> From: Seungwon Jeon <tgih.jun@samsung.com>
> 
> HS400 timing values are added for SMDK5420, exynos5420-peach-pit
> and exynos5800-peach-pi boards.
> This also adds RCLK GPIO line, this gpio should be in pull-down
> state.
> This also enables HS400 on peach-pi and this updates the clock frequency
> to 800MHz to be set as input clock to controller.
> 
> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> [Alim: addressed review comments]
> ---
>  arch/arm/boot/dts/exynos5420-peach-pit.dts |    4 +++-
>  arch/arm/boot/dts/exynos5420-pinctrl.dtsi  |    7 +++++++
>  arch/arm/boot/dts/exynos5420-smdk5420.dts  |    4 +++-
>  arch/arm/boot/dts/exynos5800-peach-pi.dts  |    7 +++++--
>  4 files changed, 18 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index 9a050e1..f7a44a4 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -569,8 +569,10 @@
>  	samsung,dw-mshc-ciu-div = <3>;
>  	samsung,dw-mshc-sdr-timing = <0 4>;
>  	samsung,dw-mshc-ddr-timing = <0 2>;
> +	samsung,dw-mshc-hs400-timing = <0 2>;
> +	samsung,read-strobe-delay = <90>;
>  	pinctrl-names = "default";
> -	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> +	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
>  	bus-width = <8>;
>  };
>  
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index ba686e4..8b15316 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -201,6 +201,13 @@
>  			samsung,pin-drv = <3>;
>  		};
>  
> +		sd0_rclk: sd0-rclk {
> +			samsung,pins = "gpc0-7";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <1>;
> +			samsung,pin-drv = <3>;
> +		};
> +
>  		sd1_cmd: sd1-cmd {
>  			samsung,pins = "gpc1-1";
>  			samsung,pin-function = <2>;
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 8be3d7b..2078a1f 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -80,8 +80,10 @@
>  		samsung,dw-mshc-ciu-div = <3>;
>  		samsung,dw-mshc-sdr-timing = <0 4>;
>  		samsung,dw-mshc-ddr-timing = <0 2>;
> +		samsung,dw-mshc-hs400-timing = <0 2>;
> +		samsung,read-strobe-delay = <90>;
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> +		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
>  		bus-width = <8>;
>  		cap-mmc-highspeed;
>  	};
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index e8fdda8..96f0d61 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -550,15 +550,18 @@
>  	num-slots = <1>;
>  	broken-cd;
>  	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;
>  	cap-mmc-highspeed;
>  	non-removable;
>  	card-detect-delay = <200>;
> -	clock-frequency = <400000000>;
> +	clock-frequency = <800000000>;
>  	samsung,dw-mshc-ciu-div = <3>;
>  	samsung,dw-mshc-sdr-timing = <0 4>;
>  	samsung,dw-mshc-ddr-timing = <0 2>;
> +	samsung,dw-mshc-hs400-timing = <0 2>;
> +	samsung,read-strobe-delay = <90>;
>  	pinctrl-names = "default";
> -	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> +	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
>  	bus-width = <8>;
>  };
>  
> 


  reply	other threads:[~2015-02-25  6:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-29  2:41 [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support Alim Akhtar
2015-01-29  2:41 ` [PATCH V5 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode Alim Akhtar
2015-02-25  6:34   ` Jaehoon Chung
2015-02-25  8:12     ` Alim Akhtar
2015-02-25 14:38   ` Rob Herring
2015-02-26  1:22     ` Jaehoon Chung
2015-01-29  2:41 ` [PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800 Alim Akhtar
2015-02-25  6:35   ` Jaehoon Chung [this message]
2015-03-15 11:28     ` Alim Akhtar
2015-03-17  2:12       ` Kukjin Kim
2015-03-17 23:26         ` Alim Akhtar
2015-02-06  1:18 ` [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support Jaehoon Chung
     [not found]   ` <54D41654.8030702-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-02-06  5:52     ` Vivek Gautam
     [not found]       ` <CAFp+6iEGCEiGf5WooHJyh=cnJF_c7j=n_YhHLowfwjpLiXUPiQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-06  6:03         ` Jaehoon Chung
2015-02-06  6:07           ` Vivek Gautam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54ED6D24.4000703@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=a.kesavan@samsung.com \
    --cc=alim.akhtar@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=chris@printf.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=tgih.jun@samsung.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).