Re: [PATCH] mmc: dw_mmc: fix pio mode when internal dmac is enabled

[Jaehoon Chung <jh80.chung@samsung.com>]

Hi, Heiko.

Applied this patch at my dw-mmc tree.
I will request pull on this weekend.
Thanks a lot!

Best Regards,
Jaehoon Chung

On 08/04/2015 12:04 AM, Heiko Stübner wrote:
> The dw_mci_init_dma() may decide to not use dma, but pio instead, caused
> by things like wrong dma settings in the system.
> 
> Till now the code dw_mci_init_slot() always assumed that dma is available
> when CONFIG_MMC_DW_IDMAC was defined, ignoring the host->use_dma var
> set during dma init.
> 
> So when now the dma init failed for whatever reason, the transfer sizes
> would still be set for dma transfers, especially including the maximum
> block-count calculated from host->ring_size and resulting in a
> 
> [    4.991109] ------------[ cut here ]------------
> [    4.991111] kernel BUG at drivers/mmc/core/core.c:256!
> [    4.991113] Internal error: Oops - BUG: 0 [#1] SMP ARM
> 
> because host->ring_size is 0 in this case and the slot init code uses
> the wrong code to calculate the values.
> 
> Fix this by selecting the correct calculations using the host->use_dma
> variable instead of the CONFIG_MMC_DW_IDMAC config option.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  drivers/mmc/host/dw_mmc.c | 27 ++++++++++++++-------------
>  1 file changed, 14 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 40e9d8e..9ec3521 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2391,19 +2391,20 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  		mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
>  	} else {
>  		/* Useful defaults if platform data is unset. */
> -#ifdef CONFIG_MMC_DW_IDMAC
> -		mmc->max_segs = host->ring_size;
> -		mmc->max_blk_size = 65536;
> -		mmc->max_seg_size = 0x1000;
> -		mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> -		mmc->max_blk_count = mmc->max_req_size / 512;
> -#else
> -		mmc->max_segs = 64;
> -		mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> -		mmc->max_blk_count = 512;
> -		mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
> -		mmc->max_seg_size = mmc->max_req_size;
> -#endif /* CONFIG_MMC_DW_IDMAC */
> +		if (host->use_dma) {
> +			mmc->max_segs = host->ring_size;
> +			mmc->max_blk_size = 65536;
> +			mmc->max_seg_size = 0x1000;
> +			mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> +			mmc->max_blk_count = mmc->max_req_size / 512;
> +		} else {
> +			mmc->max_segs = 64;
> +			mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> +			mmc->max_blk_count = 512;
> +			mmc->max_req_size = mmc->max_blk_size *
> +					    mmc->max_blk_count;
> +			mmc->max_seg_size = mmc->max_req_size;
> +		}
>  	}
>  
>  	if (dw_mci_get_cd(mmc))
>