From: Shawn Lin <shawn.lin@rock-chips.com>
To: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
shawn.lin@rock-chips.com, linux-mmc <linux-mmc@vger.kernel.org>
Subject: Re: [REGRESSION] dereference NULL pointer when removing mmc card
Date: Thu, 27 Aug 2015 22:35:31 +0800 [thread overview]
Message-ID: <55DF2033.5060006@rock-chips.com> (raw)
In-Reply-To: <55DEB213.8060803@samsung.com>
On 2015/8/27 14:45, Jaehoon Chung wrote:
> Hi, Igor.
>
> On 08/26/2015 06:34 PM, Jaehoon Chung wrote:
>> On 08/26/2015 12:27 AM, Ulf Hansson wrote:
>>> On 22 August 2015 at 09:17, Igor Gnatenko <i.gnatenko.brain@gmail.com> wrote:
>>>> mmc0: card 59b4 removed
>>>> BUG: unable to handle kernel NULL pointer dereference at 0000000000000558
>>>> IP: [<ffffffff813895a6>] __blkg_lookup+0x26/0x70
>>>> PGD 0
>>>> Oops: 0000 [#1] SMP
>>>> Modules linked in: rfcomm cmac ccm fuse nf_conntrack_netbios_ns
>>>> nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT nf_reject_ipv6
>>>> xt_conntrack ebtable_nat ebtable_filter ebtable_broute bridge stp llc
>>>> ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
>>>> ip6table_raw ip6table_security ip6table_mangle ip6table_filter
>>>> ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
>>>> nf_nat nf_conntrack iptable_raw iptable_security iptable_mangle bnep
>>>> intel_rapl iosf_mbi btusb x86_pkg_temp_thermal coretemp kvm_intel
>>>> btrtl btbcm btintel bluetooth kvm vfat fat snd_hda_codec_hdmi arc4
>>>> snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support
>>>> snd_hda_codec_generic iwldvm snd_hda_intel snd_hda_codec mac80211
>>>> snd_hda_core snd_hwdep snd_seq snd_seq_device crct10dif_pclmul
>>>> uvcvideo crc32_pclmul
>>>> crc32c_intel videobuf2_vmalloc videobuf2_core videobuf2_memops
>>>> snd_pcm iwlwifi v4l2_common videodev ghash_clmulni_intel cfg80211
>>>> cdc_acm media thinkpad_acpi mmc_block mei_me snd_timer i2c_i801 snd
>>>> mei shpchp lpc_ich tpm_tis soundcore tpm rfkill soc_button_array wmi
>>>> nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 i2c_algo_bit
>>>> drm_kms_helper drm sdhci_pci serio_raw sdhci mmc_core video cdc_mbim
>>>> cdc_ncm usbnet mii cdc_wdm kdbus
>>>> CPU: 0 PID: 113 Comm: kworker/u16:4 Not tainted
>>>> 4.2.0-0.rc6.git0.1.fc24.x86_64 #1
>>>> Hardware name: LENOVO 3444FHG/3444FHG, BIOS G6ETA6WW (2.66 ) 05/28/2014
>>>> Workqueue: kmmcd mmc_rescan [mmc_core]
>>>> task: ffff8802122b9b80 ti: ffff8802122e4000 task.ti: ffff8802122e4000
>>>> RIP: 0010:[<ffffffff813895a6>] [<ffffffff813895a6>] __blkg_lookup+0x26/0x70
>>>> RSP: 0018:ffff8802122e7988 EFLAGS: 00010046
>>>> RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
>>>> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff820176a0
>>>> RBP: ffff8802122e79a8 R08: 00000000118de901 R09: 000000018020001e
>>>> R10: ffff8802118de900 R11: 0000000000000004 R12: ffff8802118de700
>>>> R13: ffff880212390898 R14: ffff8802136edd90 R15: ffff8802136edcd0
>>>> FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
>>>> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> CR2: 0000000000000558 CR3: 00000001f54ac000 CR4: 00000000001406f0
>>>> Stack:
>>>> ffffffff82017700 ffffffff820176a0 ffff8802118de700 ffff880212390898
>>>> ffff8802122e79d8 ffffffff8138cfaa ffff8802136edd90 ffff880212390898
>>>> ffffffff81cb3320 0000000000000000 ffff8802122e79e8 ffffffff81389f68
>>>> Call Trace:
>>>> [<ffffffff8138cfaa>] blk_throtl_drain+0x5a/0x110
>>>> [<ffffffff81389f68>] blkcg_drain_queue+0x18/0x20
>>>> [<ffffffff813698d0>] __blk_drain_queue+0xc0/0x170
>>>> [<ffffffff81369f61>] blk_queue_bypass_start+0x61/0x80
>>>> [<ffffffff81388ab9>] blkcg_deactivate_policy+0x39/0x100
>>>> [<ffffffff81393545>] cfq_exit_queue+0xd5/0xf0
>>>> [<ffffffff8136719f>] elevator_exit+0x2f/0x50
>>>> [<ffffffff81370003>] blk_release_queue+0x53/0xc0
>>>> [<ffffffff8139bb1a>] kobject_release+0x7a/0x190
>>>> [<ffffffff8139b9cf>] kobject_put+0x2f/0x60
>>>> [<ffffffff81369805>] blk_put_queue+0x15/0x20
>>>> [<ffffffff8137d142>] disk_release+0xa2/0xe0
>>>> [<ffffffff814c8466>] device_release+0x36/0xa0
>>>> [<ffffffff8139bb1a>] kobject_release+0x7a/0x190
>>>> [<ffffffff8139b9cf>] kobject_put+0x2f/0x60
>>>> [<ffffffff8137c447>] put_disk+0x17/0x20
>>>> [<ffffffffa031a158>] mmc_blk_put+0x68/0x90 [mmc_block]
>>>> [<ffffffffa031a1c8>] mmc_blk_remove_req+0x48/0xb0 [mmc_block]
>>>> [<ffffffffa031bcb6>] mmc_blk_remove+0xb6/0x130 [mmc_block]
>>>> [<ffffffffa005cdda>] mmc_bus_remove+0x1a/0x20 [mmc_core]
>>>> [<ffffffff814cd1e1>] __device_release_driver+0xa1/0x150
>>>> [<ffffffff814cd2b3>] device_release_driver+0x23/0x30
>>>> [<ffffffff814cc905>] bus_remove_device+0x105/0x180
>>>> [<ffffffff814c8d49>] device_del+0x139/0x260
>>>> [<ffffffffa005d3a2>] mmc_remove_card+0x52/0xa0 [mmc_core]
>>>> [<ffffffffa0061f4a>] mmc_sd_remove+0x2a/0x40 [mmc_core]
>>>> [<ffffffffa006205e>] mmc_sd_detect+0x4e/0x80 [mmc_core]
>>>> [<ffffffffa005c8bf>] mmc_rescan+0x16f/0x300 [mmc_core]
>>>> [<ffffffff810b64ae>] process_one_work+0x19e/0x3f0
>>>> [<ffffffff810b674e>] worker_thread+0x4e/0x450
>>>> [<ffffffff810b6700>] ? process_one_work+0x3f0/0x3f0
>>>> [<ffffffff810bc858>] kthread+0xd8/0xf0
>>>> [<ffffffff810bc780>] ? kthread_worker_fn+0x160/0x160
>>>> [<ffffffff817773df>] ret_from_fork+0x3f/0x70
>>>> [<ffffffff810bc780>] ? kthread_worker_fn+0x160/0x160
>>>> Code: eb bf 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 48 83
>>>> ec 08 48 8b 87 c8 00 00 00 48 85 c0 74 05 48 39 30 74 45 48 89 f3 <48>
>>>> 63 b6 58 05 00 00 49 89 fd 48 8d bf b8 00 00 00 41 89 d4 e8
>>>> RIP [<ffffffff813895a6>] __blkg_lookup+0x26/0x70
>>>> RSP <ffff8802122e7988>
>>>> CR2: 0000000000000558
>>>> ---[ end trace 365f1479450a495f ]---
>>>> BUG: unable to handle kernel paging request at ffffffffffffffd8
>>>> IP: [<ffffffff810bcce0>] kthread_data+0x10/0x20
>>>>
>>>>
>>>> Probably this regression caused by:
>>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/mmc/card/block.c?id=96541bac0b4e62efa42e7900d9b32e6baa9a214c
>>>
>>> Igor, thanks for the report!
>>>
>>> Unfortunate, I don't have any SDHCI (MMC controller) HW at hand for
>>> now. I will try some testing on some of my other boards.
>>>
>>> Where there any specific test circumstances needs to trigger this bug
>>> or it occurs frequently?
>>
>> I can test with sdhci controller. If there is any specific environment, let me know, plz.
>> Otherwise, i will check this.
>
> I'm testing about insert/remove sd-card. But i can't find the similar issue.
> Could you explain to me in more detail?
> I guess it's not relevant to commit 96541bac0b4.
>
> *my test environment
> Controller: SDCHI (sdhci-s3c)
> SD-card : Sandisk 2GB
> Kernel Version : v4.1
> Number of test : 1,000 (Insert/remove)
>
Hi Igor.
I will setup a batch of automatic stress test for fast-card-in-out
tomorrow on my Intel-C3230RK platform(sdhci controller) and response you
the result as well.
> Best Regards,
> Jaehoon Chung
>
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>>
>>> Kind regards
>>> Uffe
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
--
Best Regards
Shawn Lin
next prev parent reply other threads:[~2015-08-27 14:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-22 7:17 [REGRESSION] dereference NULL pointer when removing mmc card Igor Gnatenko
2015-08-25 15:27 ` Ulf Hansson
2015-08-26 9:34 ` Jaehoon Chung
2015-08-27 6:45 ` Jaehoon Chung
2015-08-27 14:35 ` Shawn Lin [this message]
2015-08-28 8:40 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DF2033.5060006@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=i.gnatenko.brain@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox