linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Lin <shawn.lin@rock-chips.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: shawn.lin@rock-chips.com, Jaehoon Chung <jh80.chung@samsung.com>,
	linux-mmc <linux-mmc@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] mmc: dw_mmc: add hw_reset extension hook
Date: Thu, 22 Oct 2015 19:25:00 +0800	[thread overview]
Message-ID: <5628C78C.809@rock-chips.com> (raw)
In-Reply-To: <CAPDyKFr6vmx4F6OShYmPvxYu=_vb70ijL-twFqBcotXTX9eEaQ@mail.gmail.com>

On 2015/10/22 17:48, Ulf Hansson wrote:
> On 22 October 2015 at 08:19, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>> This patch add hw_reset for dw_mmc to implement hw reset
>> procedure. It's useful for mmc core to recover emmc devices
>> if emmc runs into unexpected state. Add MMC_CAP_HW_RESET
>> capability to dw_mmc extension driver directly if it needs hw_reset.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>> ---
>>
>>   drivers/mmc/host/dw_mmc.c | 4 ++++
>>   drivers/mmc/host/dw_mmc.h | 2 ++
>>   2 files changed, 6 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 8a0f2995..46b12de 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1482,6 +1482,10 @@ static void dw_mci_hw_reset(struct mmc_host *mmc)
>>   {
>>          struct dw_mci_slot *slot = mmc_priv(mmc);
>>          struct dw_mci *host = slot->host;
>> +       const struct dw_mci_drv_data *drv_data = host->drv_data;
>> +
>> +       if (drv_data && drv_data->hw_reset)
>> +               return drv_data->hw_reset(host);
>
> dw_mmc is starting to walk the same bad path as sdhci has done.
>
> Please, try to avoid adding non-needed callbacks and start to turn
> dw_mmc into a library instead.
>

sorry for posting this, but then a I am just now reading your comments 
about overstaffed quirks and callback of sdhci. Obviously dw_mmc is a 
little easier to be turned into a lib before it going to be the 
equivalent weight of sdhci.

I'm glad to try it. :)

> Kind regards
> Uffe
>
>>
>>          if (host->use_dma == TRANS_MODE_IDMAC)
>>                  dw_mci_idmac_reset(host);
>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>> index 9df18c1..21b9df4 100644
>> --- a/drivers/mmc/host/dw_mmc.h
>> +++ b/drivers/mmc/host/dw_mmc.h
>> @@ -282,6 +282,7 @@ struct dw_mci_slot {
>>    * @set_ios: handle bus specific extensions.
>>    * @parse_dt: parse implementation specific device tree properties.
>>    * @execute_tuning: implementation specific tuning procedure.
>> + * @hw_reset: implementation specific hw reset procedure.
>>    *
>>    * Provide controller implementation specific extensions. The usage of this
>>    * data structure is fully optional and usage of each member in this structure
>> @@ -299,5 +300,6 @@ struct dw_mci_drv_data {
>>                                                  struct mmc_ios *ios);
>>          int             (*switch_voltage)(struct mmc_host *mmc,
>>                                            struct mmc_ios *ios);
>> +       void            (*hw_reset)(struct dw_mci *host);
>>   };
>>   #endif /* _DW_MMC_H_ */
>> --
>> 2.3.7
>>
>>
>
>
>


-- 
Best Regards
Shawn Lin

      reply	other threads:[~2015-10-22 11:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-22  6:19 [PATCH 0/2] Add hw reset support for DesignWare MMC controller Shawn Lin
2015-10-22  6:19 ` [PATCH 1/2] mmc: dw_mmc: add hw_reset support Shawn Lin
2015-10-23 12:07   ` Jaehoon Chung
2015-10-26  0:47     ` Shawn Lin
2015-10-22  6:19 ` [PATCH 2/2] mmc: dw_mmc: add hw_reset extension hook Shawn Lin
2015-10-22  9:48   ` Ulf Hansson
2015-10-22 11:25     ` Shawn Lin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5628C78C.809@rock-chips.com \
    --to=shawn.lin@rock-chips.com \
    --cc=jh80.chung@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).