Re: [RFC PATCH] mmc: remove the MMC_DATA_STREAM flag

[Jaehoon Chung <jh80.chung@samsung.com>]

Hi, Robert.

On 01/24/2016 02:59 AM, Robert Jarzmik wrote:
> Jaehoon Chung <jh80.chung@samsung.com> writes:
> 
>> It's not set to MMC_DATA_STREAM anywhere.
>> It seems that it had used with CMD11/20. But now CMD11/20 didn't also use.
>> I didn't know what is exactly, so i sent the patch as just RFC. 
>> If i get some comments for this, i will resend the patch after separate to each host controller.
>>
>> If MMC_DATA_STREAM can be removed, then flags of data should be then one of
>> MMC_DATA_READ and MMC_DATA_WRITE.
> The commit message won't pass checkpatch, will it ?

As you know, I mentioned if i get other comments, i will resend the patch.
This patch is RFC patch.

> 
>> --- a/drivers/mmc/card/block.c
>> +++ b/drivers/mmc/card/block.c
>> @@ -1525,13 +1525,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>>  	}
>>  	if (rq_data_dir(req) == READ) {
>>  		brq->cmd.opcode = readcmd;
>> -		brq->data.flags |= MMC_DATA_READ;
>> +		brq->data.flags = MMC_DATA_READ;
> Why this chunk ? If the caller had already set some flags of its own, why
> overwrite them ? That has no connection to MMC_DATA_STREAM I can see.

If MMC_DATA_STREAM is removed, there are only two flags MMC_DATA_READ and MMC_DATA_WRITE.
Are there other flags, except MMC_DATA_READ, MMC_DATA_WRITE?
READ and WRITE can not use together.

If i missed other flags, let me know, plz. 

Best Regards,
Jaehoon Chung

> ...
>> -		brq->data.flags |= MMC_DATA_WRITE;
>> +		brq->data.flags = MMC_DATA_WRITE;
> Ditto.
>> -	brq->data.flags |= MMC_DATA_WRITE;
>> +	brq->data.flags = MMC_DATA_WRITE;
> Ditto.
> 
> ... drivers not within my area zapped ...
> 
>> diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
>> index ce08896..4285d3a 100644
>> --- a/drivers/mmc/host/pxamci.c
>> +++ b/drivers/mmc/host/pxamci.c
> Works for me.
> 
> Cheers.
>