Linux MultiMedia Card development
 help / color / mirror / Atom feed
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: Jaehoon Chung <jh80.chung@samsung.com>,
	Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] mmc: dw_mmc: Fix UHS tuning on some brand of cards.
Date: Tue, 26 Apr 2016 10:03:09 +0200	[thread overview]
Message-ID: <571F20BD.4080004@collabora.com> (raw)
In-Reply-To: <571F1C4A.1060804@samsung.com>

Hi Jaehoon,

On 26/04/16 09:44, Jaehoon Chung wrote:
> Hi Enric,
>
> On 04/26/2016 12:29 AM, Enric Balletbo Serra wrote:
>> Oh, damn, I didn't include the proper tags,
>>
>> [PATCH v2] mmc: dw_mmc: Wait for data transfer after response errors.
>> [PATCH v2] mmc: dw_mmc: Fix UHS tuning on some brand of cards
>>
>> should be
>>
>> [PATCH v2 0/1] mmc: dw_mmc: Fix UHS tuning on some brand of cards
>> [PATCH v2 1/1] mmc: dw_mmc: Wait for data transfer after response errors.
>
> What changed from patch V1?
> Anyway, thanks for reminding! :)
>

Argh! also the changelog didn't go with the email. Ok, so let me resend 
this version with the proper tags and proper Changelog. I think will be 
more easy to follow the discussion then. Ignore these and sorry for the 
noise.

Best regards,
Enric

> Best Regards,
> Jaehoon Chung
>
>>
>> 2016-04-25 17:18 GMT+02:00 Enric Balletbo i Serra
>> <enric.balletbo@collabora.com>:
>>> Hi,
>>>
>>> I introduced the cover letter to give some background about this.
>>>
>>> I have been investigating a problem related to at least one specific sdcard when
>>> UHS-I is set. The card is not detected due the tuning phase reports a
>>> failure. Since the problem is only reproduced with a single model of a single
>>> brand of card, it is probably a card firmware issue, but the card works fine
>>> on my laptop.
>>>
>>> The first attempt to fix this was a patch sent by Doug Anderson [1], but Alim
>>> Akhtar found that this produced randomly a hung task on Peach-pi. I can confirm
>>> that it's easy to reproduce the hung task, either, with cold boots or suspend to
>>> ram tests.
>>>
>>> I tried to fix both problems (the original issue and the one introduced by the
>>> patch) in different ways, but I ended thinking that this second proposal is the
>>> most simple that solves both issues. So let's try to fix this by handling the
>>> response CRC error slightly differently when tuning command is happening.
>>>
>>> I tested the patch on both platforms, on exynos and on rockhip. I did lots of
>>> tests and at the moment the patch seems to fix the rockchip issue and don't
>>> hung on exynos. I'll continue testing meanwhile we discuss about it.
>>>
>>> I think the patch, at least, needs the Doug's approval (as he dig into the issue
>>> before) and the Tested-by Alim. So will be good if you have a slot of time to
>>> look a bit into this.
>>>
>>> Thanks in advance.
>>>   Enric
>>>
>>> [1] https://lkml.org/lkml/2015/5/18/495
>>>
>>> Doug Anderson (1):
>>>    mmc: dw_mmc: Wait for data transfer after response errors.
>>>
>>>   drivers/mmc/host/dw_mmc.c | 27 +++++++++++++++++++++++++++
>>>   1 file changed, 27 insertions(+)
>>>
>>> --
>>> 2.1.0
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>>
>

      reply	other threads:[~2016-04-26  8:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-25 15:18 [PATCH v2] mmc: dw_mmc: Fix UHS tuning on some brand of cards Enric Balletbo i Serra
2016-04-25 15:18 ` [PATCH v2] mmc: dw_mmc: Wait for data transfer after response errors Enric Balletbo i Serra
2016-04-25 15:29   ` Enric Balletbo Serra
2016-04-25 15:29 ` [PATCH v2] mmc: dw_mmc: Fix UHS tuning on some brand of cards Enric Balletbo Serra
2016-04-26  7:44   ` Jaehoon Chung
2016-04-26  8:03     ` Enric Balletbo i Serra [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=571F20BD.4080004@collabora.com \
    --to=enric.balletbo@collabora.com \
    --cc=eballetbo@gmail.com \
    --cc=jh80.chung@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox