* Re: Support for various sdio wifi-chips on Allwinner tablets and SBCs
[not found] ` <5844eef2-71bd-bbb9-dff6-92e01a393b36-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2016-08-12 3:47 ` Icenowy Zheng
2016-09-04 4:54 ` Julian Calaby
2017-01-14 14:08 ` Icenowy Zheng
2 siblings, 0 replies; 5+ messages in thread
From: Icenowy Zheng @ 2016-08-12 3:47 UTC (permalink / raw)
To: Hans de Goede, linux-sunxi,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Chen-Yu Tsai, Maxime Ripard, Jean-Francois Moine, Bastien Nocera
08.08.2016, 03:25, "Hans de Goede" <j.w.r.degoede-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> Hi All,
>
> Recently I've been working on getting the sdio-wifi, found on
> many a23 / a33 tablets as well as on some a10s hdmi sticks and
> on various h3 SBCs such as the Orange Pi, to work with the
> mainline kernel.
>
> If you use my sunxi-wip kernel branch (which has some dts bits
> to enable this as well as some misc. bits, which I'm all
> trying to get upstream) together with one of the following
> out of tree drivers, you should be able to get your wifi to
> work.
>
> RTL8723BS or RTL8703AS wifi:
> ----------------------------
> git clone https://github.com/jwrdegoede/rtl8723bs.git
> cd rtl8723bs
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>
> Do not forget to copy *.bin to /lib/firmware/rtlwifi/ on
> the target system.
>
> Many thanks to Bastien Nocera for his great work on the
> rtl8723bs driver, my repo just adds 2 small fixes
> to also make the rtl8703as work.
>
> RTL8189ES / RTL8189ETV
> ----------------------
> git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
> cd rtl8189ES_linux.git
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>
> Thanks to Jean-Francois Moine for his initial work on getting
> the RTL8989ES code to run with upstream kernels.
>
> RTL8189FTV
> ----------
> git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
> cd rtl8189ES_linux.git
> git checkout -B rtl8189fs origin/rtl8189fs
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>
> ESP8089
> -------
> git clone https://github.com/jwrdegoede/esp8089.git
> git checkout -B cleanup origin/cleanup
> cd ../linux
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- modules M=../esp8089 CONFIG_ESP8089=m
>
> Do not forget to copy firmware/*.bin to /lib/firmware/ on
> the target system.
>
> Many thanks to Icenowy for his work on the esp8089 driver.
Could you please use "her"? ;-)
>
> I hope this is useful to at least some of you.
>
> A quick note for Orange Pi users, the older models H3 based
> Pi-s use a soldered on wifi module with the RTL8189ETV.
> The newer models (the PC Plus, Lite and Plus 2E) use the
> RTL8189FTV soldered directly onto the PCB.
>
> Regards,
>
> Hans
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Support for various sdio wifi-chips on Allwinner tablets and SBCs
[not found] ` <5844eef2-71bd-bbb9-dff6-92e01a393b36-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-08-12 3:47 ` Icenowy Zheng
@ 2016-09-04 4:54 ` Julian Calaby
2017-01-14 14:08 ` Icenowy Zheng
2 siblings, 0 replies; 5+ messages in thread
From: Julian Calaby @ 2016-09-04 4:54 UTC (permalink / raw)
To: jwrdegoede-rxtnV0ftBwyoClj4AeEUq9i2O/JbrIOy
Cc: linux-sunxi, linux-mmc-u79uwXL29TY76Z2rM5mHXA, Chen-Yu Tsai,
Maxime Ripard, Icenowy Zheng, Jean-Francois Moine, Bastien Nocera
Hi All,
On Mon, Aug 8, 2016 at 5:25 AM, Hans de Goede <j.w.r.degoede-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hi All,
>
> Recently I've been working on getting the sdio-wifi, found on
> many a23 / a33 tablets as well as on some a10s hdmi sticks and
> on various h3 SBCs such as the Orange Pi, to work with the
> mainline kernel.
>
> If you use my sunxi-wip kernel branch (which has some dts bits
> to enable this as well as some misc. bits, which I'm all
> trying to get upstream) together with one of the following
> out of tree drivers, you should be able to get your wifi to
> work.
>
> ESP8089
> -------
> git clone https://github.com/jwrdegoede/esp8089.git
> git checkout -B cleanup origin/cleanup
> cd ../linux
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- modules M=../esp8089
> CONFIG_ESP8089=m
>
> Do not forget to copy firmware/*.bin to /lib/firmware/ on
> the target system.
>
> Many thanks to Icenowy for her work on the esp8089 driver.
The popular ESP8266 microcontrollers that have become rather popular
recently are rebranded ESP8089s. If you want to test this driver and
lack a board with one built in, here are some instructions on using
ESP-03 boards as an SDIO WiFi card on a Raspberry Pi:
https://hackaday.io/project/8678-rpi-wifi
This project eventually evolved into a RasPi hat, however the initial
instructions should be usable with any development board with exposed
SDIO lines by anyone who isn't afraid of fine-pitch soldering.
Thanks,
--
Julian Calaby
Email: julian.calaby-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Profile: http://www.google.com/profiles/julian.calaby/
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Support for various sdio wifi-chips on Allwinner tablets and SBCs
[not found] ` <5844eef2-71bd-bbb9-dff6-92e01a393b36-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-08-12 3:47 ` Icenowy Zheng
2016-09-04 4:54 ` Julian Calaby
@ 2017-01-14 14:08 ` Icenowy Zheng
2017-01-15 10:51 ` Hans de Goede
2 siblings, 1 reply; 5+ messages in thread
From: Icenowy Zheng @ 2017-01-14 14:08 UTC (permalink / raw)
To: Hans de Goede, linux-sunxi,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Chen-Yu Tsai, Maxime Ripard, Jean-Francois Moine, Bastien Nocera
08.08.2016, 03:25, "Hans de Goede" <j.w.r.degoede-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> Hi All,
>
> Recently I've been working on getting the sdio-wifi, found on
> many a23 / a33 tablets as well as on some a10s hdmi sticks and
> on various h3 SBCs such as the Orange Pi, to work with the
> mainline kernel.
>
> If you use my sunxi-wip kernel branch (which has some dts bits
> to enable this as well as some misc. bits, which I'm all
> trying to get upstream) together with one of the following
> out of tree drivers, you should be able to get your wifi to
> work.
>
> RTL8723BS or RTL8703AS wifi:
> ----------------------------
> git clone https://github.com/jwrdegoede/rtl8723bs.git
> cd rtl8723bs
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>
> Do not forget to copy *.bin to /lib/firmware/rtlwifi/ on
> the target system.
>
> Many thanks to Bastien Nocera for his great work on the
> rtl8723bs driver, my repo just adds 2 small fixes
> to also make the rtl8703as work.
>
> RTL8189ES / RTL8189ETV
> ----------------------
> git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
> cd rtl8189ES_linux.git
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>
> Thanks to Jean-Francois Moine for his initial work on getting
> the RTL8989ES code to run with upstream kernels.
>
> RTL8189FTV
> ----------
> git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
> cd rtl8189ES_linux.git
> git checkout -B rtl8189fs origin/rtl8189fs
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>
Excuse me for replying such an old email...
If a distro want to provide both 8189es and 8189fs in a kernel package,
is blacklisting one of them on boards needed?
> ESP8089
> -------
> git clone https://github.com/jwrdegoede/esp8089.git
> git checkout -B cleanup origin/cleanup
> cd ../linux
> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- modules M=../esp8089 CONFIG_ESP8089=m
>
> Do not forget to copy firmware/*.bin to /lib/firmware/ on
> the target system.
>
> Many thanks to Icenowy for his work on the esp8089 driver.
>
> I hope this is useful to at least some of you.
>
> A quick note for Orange Pi users, the older models H3 based
> Pi-s use a soldered on wifi module with the RTL8189ETV.
> The newer models (the PC Plus, Lite and Plus 2E) use the
> RTL8189FTV soldered directly onto the PCB.
>
> Regards,
>
> Hans
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Support for various sdio wifi-chips on Allwinner tablets and SBCs
2017-01-14 14:08 ` Icenowy Zheng
@ 2017-01-15 10:51 ` Hans de Goede
0 siblings, 0 replies; 5+ messages in thread
From: Hans de Goede @ 2017-01-15 10:51 UTC (permalink / raw)
To: Icenowy Zheng, linux-sunxi, linux-mmc@vger.kernel.org
Cc: Chen-Yu Tsai, Maxime Ripard, Jean-Francois Moine, Bastien Nocera
Hi,
On 14-01-17 15:08, Icenowy Zheng wrote:
>
>
> 08.08.2016, 03:25, "Hans de Goede" <j.w.r.degoede@gmail.com>:
>> Hi All,
>>
>> Recently I've been working on getting the sdio-wifi, found on
>> many a23 / a33 tablets as well as on some a10s hdmi sticks and
>> on various h3 SBCs such as the Orange Pi, to work with the
>> mainline kernel.
>>
>> If you use my sunxi-wip kernel branch (which has some dts bits
>> to enable this as well as some misc. bits, which I'm all
>> trying to get upstream) together with one of the following
>> out of tree drivers, you should be able to get your wifi to
>> work.
>>
>> RTL8723BS or RTL8703AS wifi:
>> ----------------------------
>> git clone https://github.com/jwrdegoede/rtl8723bs.git
>> cd rtl8723bs
>> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>>
>> Do not forget to copy *.bin to /lib/firmware/rtlwifi/ on
>> the target system.
>>
>> Many thanks to Bastien Nocera for his great work on the
>> rtl8723bs driver, my repo just adds 2 small fixes
>> to also make the rtl8703as work.
>>
>> RTL8189ES / RTL8189ETV
>> ----------------------
>> git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
>> cd rtl8189ES_linux.git
>> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>>
>> Thanks to Jean-Francois Moine for his initial work on getting
>> the RTL8989ES code to run with upstream kernels.
>>
>> RTL8189FTV
>> ----------
>> git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
>> cd rtl8189ES_linux.git
>> git checkout -B rtl8189fs origin/rtl8189fs
>> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux
>>
>
> Excuse me for replying such an old email...
>
> If a distro want to provide both 8189es and 8189fs in a kernel package,
> is blacklisting one of them on boards needed?
I believe not, IIRC the both have a separate sdio device-id, but I'm
not sure...
Regards,
Hans
>
>> ESP8089
>> -------
>> git clone https://github.com/jwrdegoede/esp8089.git
>> git checkout -B cleanup origin/cleanup
>> cd ../linux
>> make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- modules M=../esp8089 CONFIG_ESP8089=m
>>
>> Do not forget to copy firmware/*.bin to /lib/firmware/ on
>> the target system.
>>
>> Many thanks to Icenowy for his work on the esp8089 driver.
>>
>> I hope this is useful to at least some of you.
>>
>> A quick note for Orange Pi users, the older models H3 based
>> Pi-s use a soldered on wifi module with the RTL8189ETV.
>> The newer models (the PC Plus, Lite and Plus 2E) use the
>> RTL8189FTV soldered directly onto the PCB.
>>
>> Regards,
>>
>> Hans
^ permalink raw reply [flat|nested] 5+ messages in thread