From: Heiner Kallweit <hkallweit1@gmail.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Kevin Hilman <khilman@baylibre.com>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
linux-amlogic@lists.infradead.org
Subject: [PATCH v4 8/10] mmc: meson-gx: improve initial configuration
Date: Fri, 3 Mar 2017 20:58:18 +0100 [thread overview]
Message-ID: <58eac416-40da-8a20-e54a-0e6be3b7ba33@gmail.com> (raw)
In-Reply-To: <62912f3d-2307-cfff-3c69-c8b8ffaeb474@gmail.com>
Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.
In addition:
- write config register only if configuration changed
- Initialize clocks after other config registers have been initialized
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- rebased
v4:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 684cc088..e904b0a5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -394,15 +394,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
val |= bus_width << CFG_BUS_WIDTH_SHIFT;
- val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
- val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
-
- val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT);
- val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
-
- val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
- val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
-
val &= ~CFG_DDR;
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
ios->timing == MMC_TIMING_MMC_DDR52 ||
@@ -413,11 +404,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;
- writel(val, host->regs + SD_EMMC_CFG);
-
- if (val != orig)
+ if (val != orig) {
+ writel(val, host->regs + SD_EMMC_CFG);
dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
__func__, orig, val);
+ }
}
static void meson_mmc_request_done(struct mmc_host *mmc,
@@ -695,6 +686,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
return status;
}
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+ u32 cfg = 0;
+
+ cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
+
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
static const struct mmc_host_ops meson_mmc_ops = {
.request = meson_mmc_request,
.set_ios = meson_mmc_set_ios,
@@ -755,10 +757,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (ret)
goto free_host;
- ret = meson_mmc_clk_init(host);
- if (ret)
- goto free_host;
-
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
@@ -767,6 +765,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
+ /* set config to sane default */
+ meson_mmc_cfg_init(host);
+
+ ret = meson_mmc_clk_init(host);
+ if (ret)
+ goto free_host;
+
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
meson_mmc_irq_thread, IRQF_SHARED,
DRIVER_NAME, host);
--
2.11.1
next prev parent reply other threads:[~2017-03-03 20:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 19:49 [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements Heiner Kallweit
2017-03-03 19:51 ` [PATCH v4 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Heiner Kallweit
2017-03-03 19:52 ` [PATCH v4 2/10] mmc: meson-gx: make two functions return void Heiner Kallweit
2017-03-03 19:53 ` [PATCH v4 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host Heiner Kallweit
2017-03-03 19:54 ` [PATCH v4 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init Heiner Kallweit
2017-03-03 19:55 ` [PATCH v4 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host Heiner Kallweit
2017-03-03 19:56 ` [PATCH v4 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe Heiner Kallweit
2017-03-03 19:57 ` [PATCH v4 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init Heiner Kallweit
2017-03-03 19:58 ` Heiner Kallweit [this message]
2017-03-03 19:59 ` [PATCH v4 9/10] mmc: meson-gx: remove member mrq from struct meson_host Heiner Kallweit
2017-03-03 20:00 ` [PATCH v4 10/10] mmc: meson-gx: replace magic timeout numbers with constants Heiner Kallweit
2017-03-03 21:19 ` [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements Kevin Hilman
2017-03-03 22:54 ` Heiner Kallweit
2017-03-04 5:33 ` Kevin Hilman
2017-03-04 5:36 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58eac416-40da-8a20-e54a-0e6be3b7ba33@gmail.com \
--to=hkallweit1@gmail.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox