From: Adrian Hunter <adrian.hunter@intel.com>
To: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>,
linux-mmc@vger.kernel.org
Cc: ulf.hansson@linaro.org, michal.simek@xilinx.com,
shubhrajyoti.datta@gmail.com
Subject: Re: [PATCH 1/2] mmc: arasan: adapt to runtime pm
Date: Tue, 25 Apr 2017 13:17:58 +0300 [thread overview]
Message-ID: <77e3c31a-69df-a71e-47d8-da0e3924c4aa@intel.com> (raw)
In-Reply-To: <1492667088-20866-1-git-send-email-shubhrajyoti.datta@xilinx.com>
On 20/04/17 08:44, Shubhrajyoti Datta wrote:
> Currently the clock are enabled at probe and released at driver
> removal. This moves to enable before mmc read/ write and disables
> after it.
>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> ---
> drivers/mmc/host/sdhci-of-arasan.c | 50 ++++++++++++++++++++++++++++++++++++--
> 1 file changed, 48 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 1cfd7f9..812e75a 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -24,6 +24,7 @@
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/phy/phy.h>
> +#include <linux/pm_runtime.h>
> #include <linux/regmap.h>
> #include "sdhci-pltfm.h"
> #include <linux/of.h>
> @@ -373,10 +374,44 @@ static int sdhci_arasan_resume(struct device *dev)
>
> return sdhci_resume_host(host);
> }
> +
Runtime PM is under CONFIG_PM not CONFIG_PM_SLEEP
> +static int sdhci_arasan_runtime_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> + int ret;
> +
> + ret = sdhci_runtime_suspend_host(host);
Other drivers now have:
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
If you don't need re-tuning, maybe add a comment so we know.
> +
> + clk_disable_unprepare(pltfm_host->clk);
> + clk_disable_unprepare(sdhci_arasan->clk_ahb);
> +
> + return ret;
> +}
> +
> +static int sdhci_arasan_runtime_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> +
> + clk_prepare_enable(pltfm_host->clk);
> + clk_prepare_enable(sdhci_arasan->clk_ahb);
> +
> + return sdhci_runtime_resume_host(host);
> +}
> #endif /* ! CONFIG_PM_SLEEP */
>
> -static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
> - sdhci_arasan_resume);
> +static const struct dev_pm_ops sdhci_arasan_dev_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(sdhci_arasan_suspend,
> + sdhci_arasan_resume)
> + SET_RUNTIME_PM_OPS(sdhci_arasan_runtime_suspend,
> + sdhci_arasan_runtime_resume,
> + NULL)
> +};
>
> static const struct of_device_id sdhci_arasan_of_match[] = {
> /* SoC-specific compatible strings w/ soc_ctl_map */
> @@ -637,6 +672,12 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> goto clk_dis_ahb;
> }
>
> + pm_runtime_get_noresume(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> + pm_runtime_use_autosuspend(&pdev->dev);
> +
> sdhci_get_of_property(pdev);
>
> if (of_property_read_bool(np, "xlnx,fails-without-test-cd"))
> @@ -687,6 +728,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> if (ret)
> goto err_add_host;
>
> + pm_runtime_put(&pdev->dev);
> return 0;
>
> err_add_host:
> @@ -695,6 +737,9 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> unreg_clk:
> sdhci_arasan_unregister_sdclk(&pdev->dev);
> clk_disable_all:
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> clk_disable_unprepare(clk_xin);
> clk_dis_ahb:
> clk_disable_unprepare(sdhci_arasan->clk_ahb);
> @@ -723,6 +768,7 @@ static int sdhci_arasan_remove(struct platform_device *pdev)
>
> clk_disable_unprepare(clk_ahb);
>
> + pm_runtime_disable(&pdev->dev);
> return ret;
> }
>
>
next prev parent reply other threads:[~2017-04-25 10:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-20 5:44 [PATCH 1/2] mmc: arasan: adapt to runtime pm Shubhrajyoti Datta
2017-04-20 5:44 ` [PATCH 2/2] mmc: arasan: Add polling card detect Shubhrajyoti Datta
2017-04-25 10:31 ` Adrian Hunter
2017-05-15 9:28 ` Ulf Hansson
2017-04-25 10:17 ` Adrian Hunter [this message]
2017-04-25 10:50 ` [PATCH 1/2] mmc: arasan: adapt to runtime pm Shubhrajyoti Datta
2017-04-25 10:52 ` Adrian Hunter
2017-04-25 11:19 ` Shubhrajyoti Datta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77e3c31a-69df-a71e-47d8-da0e3924c4aa@intel.com \
--to=adrian.hunter@intel.com \
--cc=linux-mmc@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=shubhrajyoti.datta@gmail.com \
--cc=shubhrajyoti.datta@xilinx.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox