From: Adrian Hunter <adrian.hunter@intel.com>
To: Ritesh Harjani <riteshh@codeaurora.org>, ulf.hansson@linaro.org
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
shawn.lin@rock-chips.com, linux-arm-msm@vger.kernel.org,
georgi.djakov@linaro.org, asutoshd@codeaurora.org,
stummala@codeaurora.org, venkatg@codeaurora.org,
pramod.gurav@linaro.org, jeremymc@redhat.com, git@kchr.de
Subject: Re: [RESEND PATCHv1 8/8] mmc: sdhci-msm: Provide enhanced_strobe mode feature support
Date: Thu, 19 Jan 2017 12:21:46 +0200 [thread overview]
Message-ID: <7a46319a-2b49-83c4-3dd0-d7f363052b77@intel.com> (raw)
In-Reply-To: <1484031652-12059-9-git-send-email-riteshh@codeaurora.org>
On 10/01/17 09:00, Ritesh Harjani wrote:
> This provides enhanced_strobe mode feature support in sdhci-msm
> driver.
>
> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
> drivers/mmc/host/sdhci-msm.c | 34 +++++++++++++++++++++++++---------
> 1 file changed, 25 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index fa9bce3..f958697 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -103,6 +103,7 @@
>
> #define CORE_DDR_200_CFG 0x184
> #define CORE_CDC_T4_DLY_SEL BIT(0)
> +#define CORE_CMDIN_RCLK_EN BIT(1)
> #define CORE_START_CDC_TRAFFIC BIT(6)
> #define CORE_VENDOR_SPEC3 0x1b0
> #define CORE_PWRSAVE_DLL BIT(3)
> @@ -547,6 +548,7 @@ static void msm_hc_select_hs400(struct sdhci_host *host)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + struct mmc_ios ios = host->mmc->ios;
> u32 config, dll_lock;
> int rc;
>
> @@ -560,7 +562,8 @@ static void msm_hc_select_hs400(struct sdhci_host *host)
> * Select HS400 mode using the HC_SELECT_IN from VENDOR SPEC
> * register
> */
> - if (msm_host->tuning_done && !msm_host->calibration_done) {
> + if ((msm_host->tuning_done || ios.enhanced_strobe) &&
> + !msm_host->calibration_done) {
> config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC);
> config |= CORE_HC_SELECT_IN_HS400;
> config |= CORE_HC_SELECT_IN_EN;
> @@ -734,6 +737,7 @@ static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host)
>
> static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host)
> {
> + struct mmc_host *mmc = host->mmc;
> u32 dll_status, config;
> int ret;
>
> @@ -748,6 +752,12 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host)
> */
> writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + CORE_DDR_CONFIG);
>
> + if (mmc->ios.enhanced_strobe) {
> + config = readl_relaxed(host->ioaddr + CORE_DDR_200_CFG);
> + config |= CORE_CMDIN_RCLK_EN;
> + writel_relaxed(config, host->ioaddr + CORE_DDR_200_CFG);
> + }
> +
> config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG_2);
> config |= CORE_DDR_CAL_EN;
> writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG_2);
> @@ -782,6 +792,7 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + struct mmc_host *mmc = host->mmc;
> int ret;
> u32 config;
>
> @@ -795,14 +806,17 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host)
> if (ret)
> goto out;
>
> - /* Set the selected phase in delay line hw block */
> - ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
> - if (ret)
> - goto out;
> + if (!mmc->ios.enhanced_strobe) {
> + /* Set the selected phase in delay line hw block */
> + ret = msm_config_cm_dll_phase(host,
> + msm_host->saved_tuning_phase);
> + if (ret)
> + goto out;
> + config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
> + config |= CORE_CMD_DAT_TRACK_SEL;
> + writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
> + }
>
> - config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
> - config |= CORE_CMD_DAT_TRACK_SEL;
> - writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
> if (msm_host->use_cdclp533)
> ret = sdhci_msm_cdclp533_calibration(host);
> else
> @@ -899,6 +913,7 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
>
> /*
> * sdhci_msm_hs400 - Calibrate the DLL for HS400 bus speed mode operation.
> + * This needs to be done for both tuning and enhanced_strobe mode.
> * DLL operation is only needed for clock > 100MHz. For clock <= 100MHz
> * fixed feedback clock is used.
> */
> @@ -909,7 +924,8 @@ static void sdhci_msm_hs400(struct sdhci_host *host, struct mmc_ios *ios)
> int ret;
>
> if (host->clock > CORE_FREQ_100MHZ &&
> - msm_host->tuning_done && !msm_host->calibration_done) {
> + (msm_host->tuning_done || ios->enhanced_strobe) &&
> + !msm_host->calibration_done) {
> ret = sdhci_msm_hs400_dll_calibration(host);
> if (!ret)
> msm_host->calibration_done = true;
>
next prev parent reply other threads:[~2017-01-19 10:27 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-10 7:00 [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe Ritesh Harjani
2017-01-10 7:00 ` [RESEND PATCHv1 1/8] mmc: sdhci-msm: Factor out sdhci_msm_hc_select_mode Ritesh Harjani
2017-01-19 10:04 ` Adrian Hunter
2017-01-10 7:00 ` [RESEND PATCHv1 2/8] mmc: sdhci-msm: Factor out function to set/get msm clock rate Ritesh Harjani
2017-01-19 10:04 ` Adrian Hunter
2017-01-10 7:00 ` [RESEND PATCHv1 3/8] mmc: sdhci-msm: Factor out sdhci_msm_hs400 Ritesh Harjani
2017-01-19 10:04 ` Adrian Hunter
2017-01-10 7:00 ` [RESEND PATCHv1 4/8] mmc: sdhci-msm: Reset vendor specific func register on probe Ritesh Harjani
2017-01-19 10:05 ` Adrian Hunter
2017-01-10 7:00 ` [RESEND PATCHv1 5/8] mmc: sdhci-msm: configure CORE_CSR_CDC_DELAY_CFG to recommended value Ritesh Harjani
2017-01-19 10:05 ` Adrian Hunter
2017-01-20 17:42 ` Stephen Boyd
2017-01-24 8:59 ` Ritesh Harjani
2017-01-10 7:00 ` [RESEND PATCHv1 6/8] mmc: sdhci: Clear SDHCI_HS400_TUNING flag after platform_execute_tuning Ritesh Harjani
2017-01-19 10:10 ` Adrian Hunter
2017-01-19 11:37 ` Ritesh Harjani
2017-01-10 7:00 ` [RESEND PATCHv1 7/8] mmc: sdhci-msm: Make HS400 tuning follow as per recommeneded HW sequence Ritesh Harjani
2017-01-19 10:15 ` Adrian Hunter
2017-01-10 7:00 ` [RESEND PATCHv1 8/8] mmc: sdhci-msm: Provide enhanced_strobe mode feature support Ritesh Harjani
2017-01-19 10:21 ` Adrian Hunter [this message]
2017-01-17 1:07 ` [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe Jeremy McNicoll
2017-01-18 7:54 ` Ritesh Harjani
2017-01-19 20:53 ` Ulf Hansson
2017-01-20 5:18 ` Ritesh Harjani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a46319a-2b49-83c4-3dd0-d7f363052b77@intel.com \
--to=adrian.hunter@intel.com \
--cc=asutoshd@codeaurora.org \
--cc=georgi.djakov@linaro.org \
--cc=git@kchr.de \
--cc=jeremymc@redhat.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=pramod.gurav@linaro.org \
--cc=riteshh@codeaurora.org \
--cc=shawn.lin@rock-chips.com \
--cc=stummala@codeaurora.org \
--cc=ulf.hansson@linaro.org \
--cc=venkatg@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox