* [PATCH 00/30] ARM: exynos multiplatform support
@ 2013-04-11 0:04 Arnd Bergmann
2013-04-11 0:04 ` [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies Arnd Bergmann
0 siblings, 1 reply; 3+ messages in thread
From: Arnd Bergmann @ 2013-04-11 0:04 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, linux-samsung-soc, Arnd Bergmann, stern,
a.zummo, ben-linux, cjb, dwmw2, grant.likely, gregkh, jg1.han,
john.stultz, broonie, mchehab, mturquette, padma.kvr,
thierry.reding, tglx, t.figa, wsa, rui.zhang, alsa-devel,
linux-fbdev, linux-i2c, linux-media, linux-mmc, linux-mtd,
linux-pm, linux-serial, linux-usb, rtc-linux, spi-devel-general
Hi everyone,
I have updated my series for multiplatform support of the ARM exynos
platform, based on what is currently queued up in arm-soc.
It would be really nice to still get this merged for 3.10. A lot of
the patches are really trivial, but there are some complex ones
as well.
To all subsystem maintainers: feel free to directly apply the patches
for your subsystem, there should be no dependencies between any of them,
aside from the last patch requiring all of the earlier ones to be applied
first. Getting an Ack is also fine so we can put the patches into arm-soc.
Arnd
Arnd Bergmann (30):
ARM: exynos: introduce EXYNOS_ATAGS symbol
ARM: exynos: prepare for sparse IRQ
ARM: exynos: move debug-macro.S to include/debug/
ARM: samsung: move mfc device definition to s5p-dev-mfc.c
tty: serial/samsung: prepare for common clock API
tty: serial/samsung: make register definitions global
tty: serial/samsung: fix modular build
i2c: s3c2410: make header file local
mmc: sdhci-s3c: remove platform dependencies
usb: exynos: do not include plat/usb-phy.h
[media] exynos: remove unnecessary header inclusions
video/exynos: remove unnecessary header inclusions
video/s3c: move platform_data out of arch/arm
thermal/exynos: remove unnecessary header inclusions
mtd: onenand/samsung: make regs-onenand.h file local
rtc: s3c: make header file local
pwm: samsung: repair the worst MMIO abuses
ASoC: samsung: move plat/ headers to local directory
ASoC: samsung: use irq resource for idma
ASoC: samsung: convert to dmaengine API
ASoC: samsung/i2s: fix module_device_table
ASoC: samsung/idma: export idma_reg_addr_init
clk: exynos: prepare for multiplatform
clocksource: exynos_mct: remove platform header dependency
irqchip: exynos: pass max combiner number to combiner_init
irqchip: exynos: allocate combiner_data dynamically
irqchip: exynos: localize irq lookup for ATAGS
irqchip: exynos: pass irq_base from platform
spi: s3c64xx: move to generic dmaengine API
ARM: exynos: enable multiplatform support
arch/arm/Kconfig | 10 +-
arch/arm/Kconfig.debug | 8 +
arch/arm/configs/exynos4_defconfig | 2 +-
.../mach/debug-macro.S => include/debug/exynos.S} | 12 +-
.../plat/debug-macro.S => include/debug/samsung.S} | 2 +-
arch/arm/mach-exynos/Kconfig | 40 ++-
arch/arm/mach-exynos/Makefile | 5 +-
arch/arm/mach-exynos/common.c | 26 +-
arch/arm/mach-exynos/common.h | 7 +-
arch/arm/mach-exynos/dev-uart.c | 1 +
arch/arm/mach-exynos/include/mach/irqs.h | 5 +-
arch/arm/mach-exynos/mach-armlex4210.c | 2 +
arch/arm/mach-exynos/mach-exynos4-dt.c | 3 +
arch/arm/mach-exynos/mach-exynos5-dt.c | 2 +
arch/arm/mach-exynos/mach-nuri.c | 2 +
arch/arm/mach-exynos/mach-origen.c | 2 +
arch/arm/mach-exynos/mach-smdk4x12.c | 2 +
arch/arm/mach-exynos/mach-smdkv310.c | 3 +
arch/arm/mach-exynos/setup-sdhci-gpio.c | 2 +-
arch/arm/mach-exynos/setup-usb-phy.c | 8 +-
arch/arm/mach-s3c24xx/clock-s3c2440.c | 5 +
arch/arm/mach-s3c24xx/common.c | 5 +
arch/arm/mach-s3c24xx/dma-s3c2410.c | 2 -
arch/arm/mach-s3c24xx/dma-s3c2412.c | 2 -
arch/arm/mach-s3c24xx/dma-s3c2440.c | 2 -
arch/arm/mach-s3c24xx/dma-s3c2443.c | 2 -
arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 1 -
arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 2 +-
arch/arm/mach-s3c64xx/setup-usb-phy.c | 4 +-
arch/arm/mach-s5p64x0/include/mach/debug-macro.S | 2 +-
arch/arm/mach-s5pc100/include/mach/debug-macro.S | 2 +-
arch/arm/mach-s5pc100/setup-sdhci-gpio.c | 1 -
arch/arm/mach-s5pv210/include/mach/debug-macro.S | 2 +-
arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 1 -
arch/arm/mach-s5pv210/setup-usb-phy.c | 4 +-
arch/arm/plat-samsung/Kconfig | 7 +-
arch/arm/plat-samsung/Makefile | 8 +-
arch/arm/plat-samsung/devs.c | 62 ++---
arch/arm/plat-samsung/include/plat/fb.h | 50 +---
arch/arm/plat-samsung/include/plat/pm.h | 5 +
arch/arm/plat-samsung/include/plat/regs-serial.h | 282 +--------------------
arch/arm/plat-samsung/include/plat/sdhci.h | 56 +---
arch/arm/plat-samsung/include/plat/usb-phy.h | 5 +-
arch/arm/plat-samsung/irq-vic-timer.c | 1 +
arch/arm/plat-samsung/pm.c | 1 +
arch/arm/plat-samsung/s5p-dev-mfc.c | 42 ++-
arch/arm/plat-samsung/s5p-irq.c | 1 +
drivers/clk/samsung/clk-exynos4.c | 93 +++----
drivers/clk/samsung/clk-exynos5250.c | 1 -
drivers/clk/samsung/clk-exynos5440.c | 1 -
drivers/clk/samsung/clk.h | 2 -
drivers/clocksource/exynos_mct.c | 21 +-
drivers/gpio/Makefile | 2 +-
drivers/i2c/busses/i2c-s3c2410.c | 3 +-
.../regs-iic.h => drivers/i2c/busses/i2c-s3c2410.h | 0
drivers/irqchip/exynos-combiner.c | 116 +++++----
drivers/media/platform/exynos-gsc/gsc-regs.c | 1 -
drivers/media/platform/s5p-tv/sii9234_drv.c | 3 -
drivers/mmc/host/Kconfig | 2 +-
.../mmc/host/sdhci-s3c-regs.h | 0
drivers/mmc/host/sdhci-s3c.c | 5 +-
drivers/mtd/onenand/samsung.c | 4 +-
.../mtd/onenand/samsung.h | 2 -
drivers/pwm/pwm-samsung.c | 60 +++--
drivers/rtc/rtc-s3c.c | 3 +-
.../plat/regs-rtc.h => drivers/rtc/rtc-s3c.h | 3 +-
drivers/spi/spi-s3c64xx.c | 185 ++++++++++----
drivers/thermal/exynos_thermal.c | 2 -
drivers/tty/serial/samsung.c | 17 +-
drivers/tty/serial/samsung.h | 4 +-
drivers/usb/host/ehci-s5p.c | 1 -
drivers/usb/host/ohci-exynos.c | 1 -
drivers/video/exynos/exynos_mipi_dsi.c | 2 -
drivers/video/exynos/exynos_mipi_dsi_common.c | 2 -
drivers/video/exynos/exynos_mipi_dsi_lowlevel.c | 2 -
drivers/video/s3c-fb.c | 3 +-
include/linux/platform_data/mmc-sdhci-s3c.h | 56 ++++
include/linux/platform_data/spi-s3c64xx.h | 3 +
include/linux/platform_data/video_s3c.h | 54 ++++
include/linux/serial_s3c.h | 260 +++++++++++++++++++
sound/soc/samsung/ac97.c | 2 +-
sound/soc/samsung/dma.c | 219 ++++++++++++++++
sound/soc/samsung/dma.h | 15 +-
sound/soc/samsung/h1940_uda1380.c | 2 +-
sound/soc/samsung/i2s.c | 4 +-
sound/soc/samsung/idma.c | 11 +-
sound/soc/samsung/neo1973_wm8753.c | 2 +-
sound/soc/samsung/pcm.c | 1 -
.../include/plat => sound/soc/samsung}/regs-ac97.h | 0
.../include/plat => sound/soc/samsung}/regs-iis.h | 0
sound/soc/samsung/rx1950_uda1380.c | 2 +-
sound/soc/samsung/s3c24xx-i2s.c | 2 +-
sound/soc/samsung/s3c24xx_uda134x.c | 2 +-
sound/soc/samsung/spdif.c | 1 -
95 files changed, 1146 insertions(+), 734 deletions(-)
rename arch/arm/{mach-exynos/include/mach/debug-macro.S => include/debug/exynos.S} (84%)
rename arch/arm/{plat-samsung/include/plat/debug-macro.S => include/debug/samsung.S} (98%)
rename arch/arm/plat-samsung/include/plat/regs-iic.h => drivers/i2c/busses/i2c-s3c2410.h (100%)
rename arch/arm/plat-samsung/include/plat/regs-sdhci.h => drivers/mmc/host/sdhci-s3c-regs.h (100%)
rename arch/arm/plat-samsung/include/plat/regs-onenand.h => drivers/mtd/onenand/samsung.h (98%)
rename arch/arm/plat-samsung/include/plat/regs-rtc.h => drivers/rtc/rtc-s3c.h (97%)
create mode 100644 include/linux/platform_data/mmc-sdhci-s3c.h
create mode 100644 include/linux/platform_data/video_s3c.h
create mode 100644 include/linux/serial_s3c.h
rename {arch/arm/plat-samsung/include/plat => sound/soc/samsung}/regs-ac97.h (100%)
rename {arch/arm/plat-samsung/include/plat => sound/soc/samsung}/regs-iis.h (100%)
--
1.8.1.2
Cc: stern@rowland.harvard.edu
Cc: a.zummo@towertech.it
Cc: ben-linux@fluff.org
Cc: cjb@laptop.org
Cc: dwmw2@infradead.org
Cc: grant.likely@secretlab.ca
Cc: gregkh@linuxfoundation.org
Cc: jg1.han@samsung.com
Cc: john.stultz@linaro.org
Cc: broonie@opensource.wolfsonmicro.com
Cc: mchehab@redhat.com
Cc: mturquette@linaro.org
Cc: padma.kvr@gmail.com
Cc: thierry.reding@avionic-design.de
Cc: tglx@linutronix.de
Cc: t.figa@samsung.com
Cc: wsa@the-dreams.de
Cc: rui.zhang@intel.com
Cc: alsa-devel@alsa-project.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: rtc-linux@googlegroups.com
Cc: spi-devel-general@lists.sourceforge.net
.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies
2013-04-11 0:04 [PATCH 00/30] ARM: exynos multiplatform support Arnd Bergmann
@ 2013-04-11 0:04 ` Arnd Bergmann
2013-04-11 1:06 ` Chris Ball
0 siblings, 1 reply; 3+ messages in thread
From: Arnd Bergmann @ 2013-04-11 0:04 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Kukjin Kim, linux-samsung-soc, Arnd Bergmann,
linux-mmc, Chris Ball
plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c
driver, so it can become a local file there and all other
inclusions removed.
plat/sdhci.h is used only to define the platform devices,
and with the exception of the platform_data structure not
needed by the driver, so we can split out the platform_data
definition instead and leave the rest to platform code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mmc@vger.kernel.org
Cc: Chris Ball <cjb@laptop.org>
---
arch/arm/mach-exynos/setup-sdhci-gpio.c | 2 +-
arch/arm/mach-s5pc100/setup-sdhci-gpio.c | 1 -
arch/arm/mach-s5pv210/setup-sdhci-gpio.c | 1 -
arch/arm/plat-samsung/include/plat/sdhci.h | 56 +---------------------
drivers/mmc/host/Kconfig | 2 +-
.../mmc/host/sdhci-s3c-regs.h | 0
drivers/mmc/host/sdhci-s3c.c | 5 +-
include/linux/platform_data/mmc-sdhci-s3c.h | 56 ++++++++++++++++++++++
8 files changed, 61 insertions(+), 62 deletions(-)
rename arch/arm/plat-samsung/include/plat/regs-sdhci.h => drivers/mmc/host/sdhci-s3c-regs.h (100%)
create mode 100644 include/linux/platform_data/mmc-sdhci-s3c.h
diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c
index e8d08bf..d5b98c8 100644
--- a/arch/arm/mach-exynos/setup-sdhci-gpio.c
+++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c
@@ -19,8 +19,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 03c02d0..6010c03 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -19,7 +19,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 3e3ac05..0512ada 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -20,7 +20,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 5560586..ce1d0f7 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -18,62 +18,9 @@
#ifndef __PLAT_S3C_SDHCI_H
#define __PLAT_S3C_SDHCI_H __FILE__
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/devs.h>
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-enum cd_types {
- S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
- S3C_SDHCI_CD_EXTERNAL, /* use external callback */
- S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
- S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
- S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
-};
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @host_caps2: The second standard MMC host capabilities bit field.
- * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @ext_cd_init: Initialize external card detect subsystem. Called on
- * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is a callback to the sdhci-s3c driver
- * that triggers the card detection event. Callback arguments:
- * dev is pointer to platform device of the host controller,
- * state is new state of the card (0 - removed, 1 - inserted).
- * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
- * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is the same callback as for ext_cd_init.
- * @ext_cd_gpio: gpio pin used for external CD line, valid only if
- * cd_type == S3C_SDHCI_CD_GPIO
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
- unsigned int max_width;
- unsigned int host_caps;
- unsigned int host_caps2;
- unsigned int pm_caps;
- enum cd_types cd_type;
-
- int ext_cd_gpio;
- bool ext_cd_gpio_invert;
- int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
- int state));
- int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
- int state));
-
- void (*cfg_gpio)(struct platform_device *dev, int width);
-};
-
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
* @set: Pointer to the platform data to fill in.
@@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name)
break;
}
}
-
#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index d88219e..d054744 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -180,7 +180,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && PLAT_SAMSUNG
+ depends on MMC_SDHCI && PLAT_SAMSUNG_SINGLE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/drivers/mmc/host/sdhci-s3c-regs.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/regs-sdhci.h
rename to drivers/mmc/host/sdhci-s3c-regs.h
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 7363efe..e4f52b5 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -28,9 +29,7 @@
#include <linux/mmc/host.h>
-#include <plat/sdhci.h>
-#include <plat/regs-sdhci.h>
-
+#include "sdhci-s3c-regs.h"
#include "sdhci.h"
#define MAX_BUS_CLK (4)
diff --git a/include/linux/platform_data/mmc-sdhci-s3c.h b/include/linux/platform_data/mmc-sdhci-s3c.h
new file mode 100644
index 0000000..249f023
--- /dev/null
+++ b/include/linux/platform_data/mmc-sdhci-s3c.h
@@ -0,0 +1,56 @@
+#ifndef __PLATFORM_DATA_SDHCI_S3C_H
+#define __PLATFORM_DATA_SDHCI_S3C_H
+
+struct platform_device;
+
+enum cd_types {
+ S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
+ S3C_SDHCI_CD_EXTERNAL, /* use external callback */
+ S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
+ S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
+ S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @host_caps2: The second standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is a callback to the sdhci-s3c driver
+ * that triggers the card detection event. Callback arguments:
+ * dev is pointer to platform device of the host controller,
+ * state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ * cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+ unsigned int max_width;
+ unsigned int host_caps;
+ unsigned int host_caps2;
+ unsigned int pm_caps;
+ enum cd_types cd_type;
+
+ int ext_cd_gpio;
+ bool ext_cd_gpio_invert;
+ int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+ int state));
+ int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+ int state));
+
+ void (*cfg_gpio)(struct platform_device *dev, int width);
+};
+
+
+#endif /* __PLATFORM_DATA_SDHCI_S3C_H */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies
2013-04-11 0:04 ` [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies Arnd Bergmann
@ 2013-04-11 1:06 ` Chris Ball
0 siblings, 0 replies; 3+ messages in thread
From: Chris Ball @ 2013-04-11 1:06 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, linux-kernel, Kukjin Kim, linux-samsung-soc,
linux-mmc
Hi,
On Wed, Apr 10 2013, Arnd Bergmann wrote:
> plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c
> driver, so it can become a local file there and all other
> inclusions removed.
>
> plat/sdhci.h is used only to define the platform devices,
> and with the exception of the platform_data structure not
> needed by the driver, so we can split out the platform_data
> definition instead and leave the rest to platform code.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: linux-mmc@vger.kernel.org
> Cc: Chris Ball <cjb@laptop.org>
Acked-by: Chris Ball <cjb@laptop.org>
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-04-11 1:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-11 0:04 [PATCH 00/30] ARM: exynos multiplatform support Arnd Bergmann
2013-04-11 0:04 ` [PATCH 09/30] mmc: sdhci-s3c: remove platform dependencies Arnd Bergmann
2013-04-11 1:06 ` Chris Ball
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox