public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Chris Ball <cjb@laptop.org>
To: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: linux-mmc@vger.kernel.org, Philip Rakity <prakity@marvell.com>,
	Zhangfei Gao <zhangfei.gao@marvell.com>,
	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Subject: Re: [PATCH] mmc: sdhci-pxav3: dt: Support "cd-gpios" property
Date: Tue, 11 Sep 2012 11:04:58 -0400	[thread overview]
Message-ID: <878vcgy50l.fsf@octavius.laptop.org> (raw)
In-Reply-To: <CAN1soZzUZ6HiZFQ1JL-F3wU=f27dakz1HkzFRStbNP+YQ2PgWw@mail.gmail.com> (Haojian Zhuang's message of "Tue, 11 Sep 2012 22:36:50 +0800")

Hi,

On Tue, Sep 11 2012, Haojian Zhuang wrote:
> On Sun, Sep 9, 2012 at 11:09 AM, Chris Ball <cjb@laptop.org> wrote:
>> Tested on OLPC XO-4/MMP3, where the card detection pin for one of the
>> controllers is a sideband GPIO.  The third cell in the power-gpios
>> property controls whether the GPIO is active high/active low.
>>
>> Signed-off-by: Chris Ball <cjb@laptop.org>
>> ---
>>  drivers/mmc/host/sdhci-pxav3.c | 17 +++++++++++++++++
>>  1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
>> index 0bdb326..5427d52 100644
>> --- a/drivers/mmc/host/sdhci-pxav3.c
>> +++ b/drivers/mmc/host/sdhci-pxav3.c
>> @@ -211,6 +211,10 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
>>         if (gpio_flags != OF_GPIO_ACTIVE_LOW)
>>                 pdata->host_caps2 |= MMC_CAP2_PWR_ACTIVE_HIGH;
>>
>> +       pdata->ext_cd_gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &gpio_flags);
>> +       if (gpio_flags != OF_GPIO_ACTIVE_LOW)
>> +               pdata->host_caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
>> +
>>         return pdata;
>>  }
>>  #else
>> @@ -292,6 +296,15 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
>>                                 goto err_power_req;
>>                         }
>>                 }
>> +
>> +               if (gpio_is_valid(pdata->ext_cd_gpio)) {
>> +                       ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio);
>> +                       if (ret) {
>> +                               dev_err(mmc_dev(host->mmc),
>> +                                       "failed to allocate card detect gpio\n");
>> +                               goto err_cd_req;
>> +                       }
>> +               }
>>         }
>>
>>         host->ops = &pxav3_sdhci_ops;
>> @@ -309,6 +322,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
>>  err_add_host:
>>         clk_disable_unprepare(clk);
>>         clk_put(clk);
>> +       mmc_gpio_free_cd(host->mmc);
>> +err_cd_req:
>>         mmc_gpio_free_pwr(host->mmc);
>>  err_power_req:
>>  err_clk_get:
>> @@ -331,6 +346,8 @@ static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
>>
>>         if (gpio_is_valid(pdata->power_gpio))
>>                 mmc_gpio_free_pwr(host->mmc);
>> +       if (gpio_is_valid(pdata->ext_cd_gpio))
>> +               mmc_gpio_free_cd(host->mmc);
>>
>>         sdhci_pltfm_free(pdev);
>>         kfree(pxa);
>> --
>> Chris Ball   <cjb@laptop.org>   <http://printf.net/>
>> One Laptop Per Child
>
> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>

Thanks, pushed to mmc-next for 3.7 after rebasing to make this patch
precede the power_gpio patch (which isn't ready to merge).

- Chris.
-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>
One Laptop Per Child

      reply	other threads:[~2012-09-11 15:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-09  3:09 [PATCH] mmc: sdhci-pxav3: dt: Support "cd-gpios" property Chris Ball
2012-09-11 14:36 ` Haojian Zhuang
2012-09-11 15:04   ` Chris Ball [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=878vcgy50l.fsf@octavius.laptop.org \
    --to=cjb@laptop.org \
    --cc=g.liakhovetski@gmx.de \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=prakity@marvell.com \
    --cc=zhangfei.gao@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox