Re: [PATCH V7 2/9] mmc: sdhci: Add sd host v4 mode

[Adrian Hunter <adrian.hunter@intel.com>]

On 29/08/18 10:02, Chunyan Zhang wrote:
> For SD host controller version 4.00 or later ones, there're two
> modes of implementation - Version 3.00 compatible mode or
> Version 4 mode.  This patch introduced an interface to enable
> v4 mode.
> 
> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci.c | 29 +++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci.h |  3 +++
>  2 files changed, 32 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 01bf88c..0c61105 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -123,6 +123,29 @@ EXPORT_SYMBOL_GPL(sdhci_dumpregs);
>   *                                                                           *
>  \*****************************************************************************/
>  
> +static void sdhci_do_enable_v4_mode(struct sdhci_host *host)
> +{
> +	u16 ctrl2;
> +
> +	ctrl2 = sdhci_readb(host, SDHCI_HOST_CONTROL2);
> +	if (ctrl2 & SDHCI_CTRL_V4_MODE)
> +		return;
> +
> +	ctrl2 |= SDHCI_CTRL_V4_MODE;
> +	sdhci_writeb(host, ctrl2, SDHCI_HOST_CONTROL);
> +}
> +
> +/*
> + * This can be called before sdhci_add_host() by Vendor's host controller
> + * driver to enable v4 mode if supported.
> + */
> +void sdhci_enable_v4_mode(struct sdhci_host *host)
> +{
> +	host->v4_mode = true;
> +	sdhci_do_enable_v4_mode(host);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode);
> +
>  static inline bool sdhci_data_line_cmd(struct mmc_command *cmd)
>  {
>  	return cmd->data || cmd->flags & MMC_RSP_BUSY;
> @@ -252,6 +275,9 @@ static void sdhci_init(struct sdhci_host *host, int soft)
>  	else
>  		sdhci_do_reset(host, SDHCI_RESET_ALL);
>  
> +	if (host->v4_mode)
> +		sdhci_do_enable_v4_mode(host);
> +
>  	sdhci_set_default_irqs(host);
>  
>  	host->cqe_on = false;
> @@ -3378,6 +3404,9 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
>  
>  	sdhci_do_reset(host, SDHCI_RESET_ALL);
>  
> +	if (host->v4_mode)
> +		sdhci_do_enable_v4_mode(host);
> +
>  	of_property_read_u64(mmc_dev(host->mmc)->of_node,
>  			     "sdhci-caps-mask", &dt_caps_mask);
>  	of_property_read_u64(mmc_dev(host->mmc)->of_node,
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index dbd48a8..61611e3 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -184,6 +184,7 @@
>  #define   SDHCI_CTRL_DRV_TYPE_D		0x0030
>  #define  SDHCI_CTRL_EXEC_TUNING		0x0040
>  #define  SDHCI_CTRL_TUNED_CLK		0x0080
> +#define  SDHCI_CTRL_V4_MODE		0x1000
>  #define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000
>  
>  #define SDHCI_CAPABILITIES	0x40
> @@ -504,6 +505,7 @@ struct sdhci_host {
>  	bool preset_enabled;	/* Preset is enabled */
>  	bool pending_reset;	/* Cmd/data reset is pending */
>  	bool irq_wake_enabled;	/* IRQ wakeup is enabled */
> +	bool v4_mode;		/* Host Version 4 Enable */
>  
>  	struct mmc_request *mrqs_done[SDHCI_MAX_MRQS];	/* Requests done */
>  	struct mmc_command *cmd;	/* Current command */
> @@ -752,6 +754,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
>  		   int *data_error);
>  
>  void sdhci_dumpregs(struct sdhci_host *host);
> +void sdhci_enable_v4_mode(struct sdhci_host *host);
>  
>  void sdhci_start_tuning(struct sdhci_host *host);
>  void sdhci_end_tuning(struct sdhci_host *host);
>