messages from 2023-06-19 11:53:11 to 2023-06-24 08:13:55 UTC [more...]
[PATCH v2 00/45] Add support for sam9x7 SoC family
2023-06-24 8:13 UTC (69+ messages)
` [PATCH v2 01/45] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7 compatible
` [PATCH v2 02/45] dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible
` [PATCH v2 03/45] dt-bindings: usb: generic-ehci: Document clock-names property
` [PATCH v2 04/45] dt-bindings: net: cdns,macb: add documentation for sam9x7 ethernet interface
` [PATCH v2 05/45] ARM: at91: pm: add support for sam9x7 SoC family
` [PATCH v2 06/45] ARM: at91: pm: add sam9x7 SoC init config
` [PATCH v2 07/45] ARM: at91: add support in SoC driver for new sam9x7
` [PATCH v2 08/45] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
` [PATCH v2 09/45] clk: at91: sam9x7: add support for HW PLL freq dividers
` [PATCH v2 10/45] clk: at91: sama7g5: move mux table macros to header file
` [PATCH v2 11/45] dt-bindings: clk: at91: add bindings for SAM9X7's clock controller
` [PATCH v2 12/45] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 binding
` [PATCH v2 13/45] dt-bindings: atmel-sysreg: add bindings for sam9x7
` [PATCH v2 14/45] dt-bindings: crypto: add bindings for sam9x7 in Atmel AES
` [PATCH v2 15/45] dt-bindings: crypto: add bindings for sam9x7 in Atmel SHA
` [PATCH v2 16/45] dt-bindings: crypto: add bindings for sam9x7 in Atmel TDES
` [PATCH v2 17/45] dt-bindings: dmaengine: at_xdmac: add compatible with microchip,sam9x7
` [PATCH v2 18/45] dt-bindings: i2c: at91: Add SAM9X7 compatible string
` [PATCH v2 19/45] dt-bindings: mfd: "
` [PATCH v2 20/45] dt-bindings: atmel-gpbr: add microchip,sam9x7-gpbr
` [PATCH v2 21/45] dt-bindings: atmel-matrix: add microchip,sam9x7-matrix
` [PATCH v2 22/45] dt-bindings: atmel-smc: add microchip,sam9x7-smc
` [PATCH v2 23/45] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc
` [PATCH v2 24/45] dt-bindings: sdhci-of-at91: add microchip,sam9x7-sdhci
` [PATCH v2 25/45] dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
` [PATCH v2 26/45] dt-bindings: pinctrl: at91: add bindings for SAM9X7
` [PATCH v2 27/45] dt-bindings: rng: atmel,at91-trng: document sam9x7 TRNG
` [PATCH v2 28/45] dt-bindings: rtc: at91rm9200: add sam9x7 compatible
` [PATCH v2 29/45] dt-bindings: rtt: at91rm9260: "
` [PATCH v2 30/45] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7
` [PATCH v2 31/45] dt-bindings: atmel-classd: add sam9x7 compatible
` [PATCH v2 32/45] spi: dt-bindings: atmel,at91rm9200-spi: "
` [PATCH v2 33/45] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x7
` [PATCH v2 34/45] dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
` [PATCH v2 35/45] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
` [PATCH v2 36/45] clk: at91: sam9x7: add sam9x7 pmc driver
` [PATCH v2 37/45] irqchip/atmel-aic5: Add support for sam9x7 aic
` [PATCH v2 38/45] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
` [PATCH v2 39/45] power: reset: at91-reset: add reset support for sam9x7 SoC
` [PATCH v2 40/45] power: reset: at91-reset: add sdhwc "
` [PATCH v2 41/45] ARM: at91: Kconfig: add config flag for SAM9X7 SoC
` [PATCH v2 42/45] ARM: configs: at91: enable config flags for sam9x7 SoC family
` [PATCH v2 43/45] ARM: dts: at91: sam9x7: add device tree for SoC
` [PATCH v2 44/45] dt-bindings: arm: add sam9x75 curiosity board
` [PATCH v2 45/45] ARM: dts: at91: sam9x75_curiosity: add device tree for "
` (subset) [PATCH v2 00/45] Add support for sam9x7 SoC family
[PATCH V2 0/7] ARM: dts: bcm283x: Improve device-trees and bindings
2023-06-23 21:00 UTC (18+ messages)
` [PATCH V2 1/7] ARM: dts: bcm283x: Fix pinctrl groups
` [PATCH V2 2/7] dt-bindings: dma: convert bcm2835-dma bindings to YAML
` [PATCH V2 3/7] ARM: dts: bcm2835: adjust DMA node names
` [PATCH V2 5/7] ARM: dts: bcm283x: Increase pwm-cells
` [PATCH V2 6/7] dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
` [PATCH V2 7/7] dt-bindings: timer: convert bcm2835-system-timer "
` (subset) [PATCH V2 0/7] ARM: dts: bcm283x: Improve device-trees and bindings
[PATCH v7 0/3] Add dedicated Qcom ICE driver
2023-06-23 1:06 UTC (8+ messages)
` [PATCH v7 1/3] dt-bindings: ufs: qcom: Add ICE phandle
[GIT PULL] MMC fixes for v6.4-rc8
2023-06-23 1:03 UTC (2+ messages)
[RESEND v7 0/3] Add dedicated Qcom ICE driver
2023-06-22 16:45 UTC (3+ messages)
` [RESEND v7 2/3] scsi: ufs: ufs-qcom: Switch to the new ICE API
[PATCH] mmc: meson-gx: Drop redundant WARN_ON() in the irq handler
2023-06-22 10:53 UTC
[PATCHv3 1/1] mmc: block: ioctl: Add PROG-error aggregation
2023-06-22 9:45 UTC (4+ messages)
[PATCH v1 0/7] Add support for various features to i.MX6 bindings
2023-06-22 9:11 UTC (11+ messages)
` [PATCH v2 1/5] dt-bindings: mmc: fsl-imx-esdhc: Add imx6ul support
` [PATCH v2 2/5] dt-bindings: timer: gpt: Add i.MX6UL support
` [PATCH v2 3/5] dt-bindings: timer: gpt: Support 3rd clock for i.MX6DL
` [PATCH v2 4/5] dt-bindings: clock: imx6ul: Support optional enet*_ref_pad clocks
` [PATCH v2 5/5] dt-bindings: input: touchscreen: edt-ft5x06: Add 'threshold' property
[PATCH] mmc: mmci: Add support for SW busy-end timeouts
2023-06-22 9:11 UTC (10+ messages)
[PATCH] mmc: sunplus: fix return value check of mmc_add_host()
2023-06-22 9:02 UTC
Tlakově litý
2023-06-22 7:56 UTC
[PATCH V8 00/23] Add support UHS-II for GL9755
2023-06-21 13:44 UTC (25+ messages)
` [PATCH V8 01/23] mmc: core: Cleanup printing of speed mode at card insertion
` [PATCH V8 02/23] mmc: core: Prepare to support SD UHS-II cards
` [PATCH V8 03/23] mmc: core: Announce successful insertion of an SD UHS-II card
` [PATCH V8 04/23] mmc: core: Extend support for mmc regulators with a vqmmc2
` [PATCH V8 05/23] mmc: core: Add definitions for SD UHS-II cards
` [PATCH V8 06/23] mmc: core: Support UHS-II card control and access
` [PATCH V8 07/23] mmc: sdhci: add UHS-II related definitions in headers
` [PATCH V8 08/23] mmc: sdhci: add UHS-II module and add a kernel configuration
` [PATCH V8 09/23] mmc: sdhci-uhs2: dump UHS-II registers
` [PATCH V8 10/23] mmc: sdhci-uhs2: add reset function and uhs2_mode function
` [PATCH V8 11/23] mmc: sdhci-uhs2: add set_power() to support vdd2
` [PATCH V8 12/23] mmc: sdhci-uhs2: skip signal_voltage_switch()
` [PATCH V8 13/23] mmc: sdhci-uhs2: add set_timeout()
` [PATCH V8 14/23] mmc: sdhci-uhs2: add set_ios()
` [PATCH V8 15/23] mmc: sdhci-uhs2: add detect_init() to detect the interface
` [PATCH V8 16/23] mmc: sdhci-uhs2: add clock operations
` [PATCH V8 17/23] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
` [PATCH V8 18/23] mmc: sdhci-uhs2: add request() and others
` [PATCH V8 19/23] mmc: sdhci-uhs2: add irq() "
` [PATCH V8 20/23] mmc: sdhci-uhs2: add add_host() and others to set up the driver
` [PATCH V8 21/23] mmc: sdhci-uhs2: add pre-detect_init hook
` [PATCH V8 22/23] mmc: sdhci-pci: add UHS-II support framework
` [PATCH V8 23/23] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755
[PATCH 01/11] mmc: core: Use BIT() macro
2023-06-21 11:23 UTC (16+ messages)
` [PATCH 02/11] mmc: card: "
` [PATCH 03/11] mmc: host: "
` [PATCH 04/11] mmc: mmc: "
` [PATCH 05/11] mmc: sd: "
` [PATCH 06/11] mmc: sdio: "
` [PATCH 07/11] mmc: mmci: "
` [PATCH 08/11] mmc: pxav3: "
` [PATCH 09/11] mmc: sdhci: "
` [PATCH 10/11] mmc: vub300: "
` [PATCH 11/11] mmc: wbsd: "
[PATCH V7 00/23] Add support UHS-II for GL9755
2023-06-21 10:33 UTC (49+ messages)
` [PATCH V7 06/23] mmc: core: Support UHS-II card control and access
` [PATCH V7 07/23] mmc: sdhci: add UHS-II related definitions in headers
` [PATCH V7 08/23] mmc: sdhci: add UHS-II module and add a kernel configuration
` [PATCH V7 10/23] mmc: sdhci-uhs2: add reset function and uhs2_mode function
` [PATCH V7 11/23] mmc: sdhci-uhs2: add set_power() to support vdd2
` [PATCH V7 13/23] mmc: sdhci-uhs2: add set_timeout()
` [PATCH V7 14/23] mmc: sdhci-uhs2: add set_ios()
` [PATCH V7 15/23] mmc: sdhci-uhs2: add detect_init() to detect the interface
` [PATCH V7 16/23] mmc: sdhci-uhs2: add clock operations
` [PATCH V7 17/23] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
` [PATCH V7 18/23] mmc: sdhci-uhs2: add request() and others
` [PATCH V7 19/23] mmc: sdhci-uhs2: add irq() "
` [PATCH V7 20/23] mmc: sdhci-uhs2: add add_host() and others to set up the driver
` [PATCH V7 22/23] mmc: sdhci-pci: add UHS-II support framework
` [PATCH V7 23/23] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755
[PATCHv2 2/2] mmc: block: ioctl: Add PROG-error aggregation
2023-06-20 15:48 UTC (4+ messages)
[PATCH] CMDQ feature is introduced to eMMC standard in v5.1, which can be used to improve performance
2023-06-20 13:19 UTC (4+ messages)
[PATCHv3 0/1] mmc: block: ioctl: Enhance userspace err-checking
2023-06-20 12:40 UTC
[PATCH v2] mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019
2023-06-20 11:20 UTC (2+ messages)
[PATCH v2 0/6] Update MMCI driver for STM32MP25
2023-06-20 10:13 UTC (7+ messages)
` [PATCH v2 1/6] dt-bindings: mmc: mmci: Add st,stm32mp25-sdmmc2 compatible
` [PATCH v2 4/6] mmc: mmci: stm32: manage block gap hardware flow control
` [PATCH v2 5/6] mmc: mmci: stm32: prepare other delay block support
` [PATCH v2 6/6] mmc: mmci: stm32: add delay block support for STM32MP25
[PATCH] mmc: core: disable TRIM on Kingston EMMC04G-M627
2023-06-20 10:14 UTC (2+ messages)
[PATCH] mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019
2023-06-20 10:13 UTC (2+ messages)
Odroid-C1 regression with commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending HS CMD13")
2023-06-20 9:53 UTC (10+ messages)
Question about EMMC CMDQ HOST CONTROLLER INTERFACE (CQHCI) DRIVER
2023-06-20 6:46 UTC
[PATCH V2 1/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for UHS-I
2023-06-20 5:53 UTC (5+ messages)
` [PATCH V2 2/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for express card
[PATCH] [RFC] Revert "mmc: core: Fixup support for writeback-cache for eMMC and SD"
2023-06-20 1:44 UTC (18+ messages)
[PATCH] mmc: meson-mx-sdhc: Fix initialization frozen issue
2023-06-19 19:51 UTC (2+ messages)
[PATCH] mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
2023-06-19 19:36 UTC (4+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox