Re: [PATCH V1 1/2] mmc: sdhci: Introduce new quirk to use reserved timeout

[Ulf Hansson <ulf.hansson@linaro.org>]

On Mon, 18 May 2020 at 13:45, Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 18/05/20 12:39 pm, Ulf Hansson wrote:
> > On Wed, 6 May 2020 at 15:53, Sarthak Garg <sartgarg@codeaurora.org> wrote:
> >>
> >> Introduce a new quirk for letting vendor drivers to use reserved
> >> timeout value (0xF) in timeout control register.
> >>
> >> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
> >> Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
> >> ---
> >>  drivers/mmc/host/sdhci.c | 3 ++-
> >>  drivers/mmc/host/sdhci.h | 5 +++++
> >>  2 files changed, 7 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> >> index 1bb6b67..07528a9 100644
> >> --- a/drivers/mmc/host/sdhci.c
> >> +++ b/drivers/mmc/host/sdhci.c
> >> @@ -967,7 +967,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
> >>         }
> >>
> >>         if (count >= 0xF) {
> >> -               if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
> >> +               if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) ||
> >> +               !(host->quirks2 & SDHCI_QUIRK2_USE_RESERVED_MAX_TIMEOUT))
> >
> > I don't quite get how this can make your variant use 0xF rather than 0xE?
> >
> > To me it looks like an updated conditional check to print a debug message, no?
>
> Probably need to introduce host->max_timeout_count, set it to 0xE in
> sdhci_alloc_host(), and change sdhci_calc_timeout() to use it in place of
> all the 0xE and 0xF constants.

Yep, that seems like a reasonable approach to me as well.

[...]

Kind regards
Uffe