linux-mmc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@arm.linux.org.uk>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Marcin Wojtas <mw@semihalf.com>,
	Gregory CLEMENT <gregory.clement@free-electrons.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <kernel@pengutronix.de>,
	linux-mmc@vger.kernel.org
Subject: [PATCH v2 08/24] mmc: sdhci: avoid unnecessary mapping/unmapping of align buffer
Date: Mon, 21 Dec 2015 11:41:02 +0000	[thread overview]
Message-ID: <E1aAypq-00016e-Lv@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20151221113956.GA3712@n2100.arm.linux.org.uk>

Unnecessarily mapping and unmapping the align buffer for SD cards is
expensive: performance measurements on iMX6 show that this gives a hit
of 10% on hdparm buffered disk reads.

MMC/SD card IO comes from the mm/vfs which gives us page based IO, so
for this case, the align buffer is not going to be used.  However, we
still map and unmap this buffer.

Eliminate this by switching the align buffer to be a DMA coherent
buffer, which needs no DMA maintenance to access the buffer.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mmc/host/sdhci.c | 53 ++++++++++++++++--------------------------------
 1 file changed, 18 insertions(+), 35 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 3e718e465a1b..8a4eb1c41f3e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -465,8 +465,6 @@ static void sdhci_adma_mark_end(void *desc)
 static int sdhci_adma_table_pre(struct sdhci_host *host,
 	struct mmc_data *data)
 {
-	int direction;
-
 	void *desc;
 	void *align;
 	dma_addr_t addr;
@@ -483,20 +481,9 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 	 * We currently guess that it is LE.
 	 */
 
-	if (data->flags & MMC_DATA_READ)
-		direction = DMA_FROM_DEVICE;
-	else
-		direction = DMA_TO_DEVICE;
-
-	host->align_addr = dma_map_single(mmc_dev(host->mmc),
-		host->align_buffer, host->align_buffer_sz, direction);
-	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
-		goto fail;
-	BUG_ON(host->align_addr & host->align_mask);
-
 	host->sg_count = sdhci_pre_dma_transfer(host, data);
 	if (host->sg_count < 0)
-		goto unmap_align;
+		return -EINVAL;
 
 	desc = host->adma_table;
 	align = host->align_buffer;
@@ -567,22 +554,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		/* nop, end, valid */
 		sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
 	}
-
-	/*
-	 * Resync align buffer as we might have changed it.
-	 */
-	if (data->flags & MMC_DATA_WRITE) {
-		dma_sync_single_for_device(mmc_dev(host->mmc),
-			host->align_addr, host->align_buffer_sz, direction);
-	}
-
 	return 0;
-
-unmap_align:
-	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
-		host->align_buffer_sz, direction);
-fail:
-	return -EINVAL;
 }
 
 static void sdhci_adma_table_post(struct sdhci_host *host,
@@ -602,9 +574,6 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 	else
 		direction = DMA_TO_DEVICE;
 
-	dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
-		host->align_buffer_sz, direction);
-
 	/* Do a quick scan of the SG list for any unaligned mappings */
 	has_unaligned = false;
 	for_each_sg(data->sg, sg, host->sg_count, i)
@@ -3003,6 +2972,10 @@ int sdhci_add_host(struct sdhci_host *host)
 						      host->adma_table_sz,
 						      &host->adma_addr,
 						      GFP_KERNEL);
+		host->align_buffer = dma_alloc_coherent(mmc_dev(mmc),
+							host->align_buffer_sz,
+							&host->align_addr,
+							GFP_KERNEL);
 		host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
 		if (!host->adma_table || !host->align_buffer) {
 			if (host->adma_table)
@@ -3010,7 +2983,11 @@ int sdhci_add_host(struct sdhci_host *host)
 						  host->adma_table_sz,
 						  host->adma_table,
 						  host->adma_addr);
-			kfree(host->align_buffer);
+			if (host->align_buffer)
+				dma_free_coherent(mmc_dev(mmc),
+						  host->align_buffer_sz,
+						  host->align_buffer,
+						  host->align_addr);
 			pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
 				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
@@ -3022,10 +2999,14 @@ int sdhci_add_host(struct sdhci_host *host)
 			host->flags &= ~SDHCI_USE_ADMA;
 			dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
 					  host->adma_table, host->adma_addr);
-			kfree(host->align_buffer);
+			dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz,
+					  host->align_buffer, host->align_addr);
 			host->adma_table = NULL;
 			host->align_buffer = NULL;
 		}
+
+		/* dma_alloc_coherent returns page aligned and sized buffers */
+		BUG_ON(host->align_addr & host->align_mask);
 	}
 
 	/*
@@ -3489,7 +3470,9 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 	if (host->adma_table)
 		dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
 				  host->adma_table, host->adma_addr);
-	kfree(host->align_buffer);
+	if (host->align_buffer)
+		dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz,
+				  host->align_buffer, host->align_addr);
 
 	host->adma_table = NULL;
 	host->align_buffer = NULL;
-- 
2.1.0


  parent reply	other threads:[~2015-12-21 11:41 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-21 11:39 [PATCH v2 00/24] MMC/SDHCI fixes Russell King - ARM Linux
2015-12-21 11:40 ` [PATCH v2 01/24] mmc: core: shut up "voltage-ranges unspecified" pr_info() Russell King
2015-12-21 11:40 ` [PATCH v2 02/24] mmc: core: improve mmc_of_parse_voltage() to return better status Russell King
2015-12-21 11:40 ` [PATCH v2 03/24] mmc: block: shut up "retrying because a re-tune was needed" message Russell King
2015-12-21 11:40 ` [PATCH v2 04/24] mmc: core: report tuning command execution failure reason Russell King
2015-12-21 11:40 ` [PATCH v2 05/24] mmc: sdhci: move initialisation of command error member Russell King
2015-12-21 11:40 ` [PATCH v2 06/24] mmc: sdhci: clean up command error handling Russell King
2015-12-21 11:40 ` [PATCH v2 07/24] mmc: sdhci: command response CRC " Russell King
2015-12-29 13:08   ` Adrian Hunter
2016-01-02 12:25     ` Russell King - ARM Linux
2016-01-04 11:24       ` Adrian Hunter
2016-01-26 13:35         ` Russell King - ARM Linux
2015-12-21 11:41 ` Russell King [this message]
2015-12-29 13:44   ` [PATCH v2 08/24] mmc: sdhci: avoid unnecessary mapping/unmapping of align buffer Adrian Hunter
2016-01-02 12:29     ` Russell King - ARM Linux
2016-01-02 14:31       ` Russell King - ARM Linux
2016-01-04 11:41         ` Adrian Hunter
2016-01-04 11:50       ` Adrian Hunter
2016-01-04 11:56         ` Russell King - ARM Linux
2015-12-21 11:41 ` [PATCH v2 09/24] mmc: sdhci: clean up coding style in sdhci_adma_table_pre() Russell King
2015-12-21 11:41 ` [PATCH v2 10/24] mmc: sdhci: avoid walking SG list for writes Russell King
2015-12-21 11:41 ` [PATCH v2 11/24] mmc: sdhci: factor out common DMA cleanup in sdhci_finish_data() Russell King
2015-12-21 11:41 ` [PATCH v2 12/24] mmc: sdhci: move sdhci_pre_dma_transfer() Russell King
2015-12-21 11:41 ` [PATCH v2 13/24] mmc: sdhci: factor out sdhci_pre_dma_transfer() from sdhci_adma_table_pre() Russell King
2015-12-21 11:41 ` [PATCH v2 14/24] mmc: sdhci: pass the cookie into sdhci_pre_dma_transfer() Russell King
2015-12-21 11:41 ` [PATCH v2 15/24] mmc: sdhci: always unmap a mapped data transfer in sdhci_post_req() Russell King
2015-12-21 11:41 ` [PATCH v2 16/24] mmc: sdhci: clean up host cookie handling Russell King
2015-12-21 11:41 ` [PATCH v2 17/24] mmc: sdhci: plug DMA mapping leak on error Russell King
2015-12-21 11:41 ` [PATCH v2 18/24] mmc: sdhci-pxav3: fix higher speed mode capabilities Russell King
2015-12-21 11:54   ` Marcin Wojtas
2015-12-21 11:41 ` [PATCH v2 19/24] mmc: sdhci: further fix for DMA unmapping in sdhci_post_req() Russell King
2015-12-21 11:42 ` [PATCH v2 20/24] mmc: sdhci: fix data timeout (part 1) Russell King
2015-12-21 11:42 ` [PATCH v2 21/24] mmc: sdhci: fix data timeout (part 2) Russell King
2015-12-21 11:42 ` [PATCH v2 22/24] mmc: sdhci: prepare DMA address/size quirk handling consolidation Russell King
2015-12-21 11:42 ` [PATCH v2 23/24] mmc: sdhci: consolidate the DMA/ADMA size/address quicks Russell King
2015-12-21 11:42 ` [PATCH v2 24/24] mmc: sdhci: further code simplication Russell King
2015-12-21 12:35 ` [PATCH v2 00/24] MMC/SDHCI fixes Ulf Hansson
2015-12-21 12:51   ` Russell King - ARM Linux
2015-12-21 13:23     ` Ulf Hansson
2015-12-21 13:41       ` Russell King - ARM Linux
2015-12-21 13:59         ` Ulf Hansson
2015-12-22 11:25           ` Ulf Hansson
2015-12-22 11:40             ` Russell King - ARM Linux
2015-12-21 12:58 ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1aAypq-00016e-Lv@rmk-PC.arm.linux.org.uk \
    --to=rmk+kernel@arm.linux.org.uk \
    --cc=gregory.clement@free-electrons.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mw@semihalf.com \
    --cc=shawnguo@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).