From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-mmc@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: Re: [PATCH v2] mmc: tmio: always restore irq register
Date: Tue, 13 Apr 2021 17:37:36 +0200 [thread overview]
Message-ID: <YHW6wD1XmeYV6L5M@oden.dyn.berto.se> (raw)
In-Reply-To: <20210413083137.11171-1-wsa+renesas@sang-engineering.com>
Hi Wolfram,
Thanks for your work.
On 2021-04-13 10:31:37 +0200, Wolfram Sang wrote:
> Currently, only SDHI on R-Car Gen2+ reinitializes the irq register
> during reset but it should be done on all instances. We can move it from
> the SDHI driver to the TMIO core, because we now have the
> 'sd_irq_mask_all' variable which carries the proper value to use. That
> also means we can remove the initialization from tmio_mmc_probe()
> because it calls tmio_mmc_reset(), too. We only move that
> tmio_mmc_reset() call there a little to ensure 'sd_irq_mask_all' is
> properly set.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
I like patches like this.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>
> Changes since v1:
>
> * use direct register write to initialize irq register instead of
> masking bits. Also initialize the cache variable directly.
>
> drivers/mmc/host/renesas_sdhi_core.c | 2 --
> drivers/mmc/host/tmio_mmc_core.c | 11 ++++++-----
> 2 files changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
> index d36181b6f687..635bf31a6735 100644
> --- a/drivers/mmc/host/renesas_sdhi_core.c
> +++ b/drivers/mmc/host/renesas_sdhi_core.c
> @@ -588,8 +588,6 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host)
> renesas_sdhi_scc_reset(host, priv);
> }
>
> - sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, TMIO_MASK_ALL_RCAR2);
> -
> if (sd_ctrl_read16(host, CTL_VERSION) >= SDHI_VER_GEN3_SD) {
> val = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT);
> val |= CARD_OPT_EXTOP;
> diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
> index 0c474d78b186..7dfc26f48c18 100644
> --- a/drivers/mmc/host/tmio_mmc_core.c
> +++ b/drivers/mmc/host/tmio_mmc_core.c
> @@ -192,6 +192,9 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
> if (host->reset)
> host->reset(host);
>
> + sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all);
> + host->sdcard_irq_mask = host->sdcard_irq_mask_all;
> +
> tmio_mmc_set_bus_width(host, host->mmc->ios.bus_width);
>
> if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
> @@ -1176,13 +1179,11 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
> if (pdata->flags & TMIO_MMC_SDIO_IRQ)
> _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
>
> - _host->set_clock(_host, 0);
> - tmio_mmc_reset(_host);
> -
> - _host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
> if (!_host->sdcard_irq_mask_all)
> _host->sdcard_irq_mask_all = TMIO_MASK_ALL;
> - tmio_mmc_disable_mmc_irqs(_host, _host->sdcard_irq_mask_all);
> +
> + _host->set_clock(_host, 0);
> + tmio_mmc_reset(_host);
>
> if (_host->native_hotplug)
> tmio_mmc_enable_mmc_irqs(_host,
> --
> 2.30.0
>
--
Regards,
Niklas Söderlund
next prev parent reply other threads:[~2021-04-13 15:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-13 8:31 [PATCH v2] mmc: tmio: always restore irq register Wolfram Sang
2021-04-13 15:37 ` Niklas Söderlund [this message]
2021-04-15 11:54 ` Yoshihiro Shimoda
2021-04-15 12:02 ` Ulf Hansson
2021-04-15 19:58 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YHW6wD1XmeYV6L5M@oden.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox