Re: [PATCH v4 13/13] ARM: imxrt1050_defconfig: add i.MXRT1050 defconfig

Giulio Benetti
2021-12-06T20:23:54Z

Hi Jesse,

On 04/12/21 07:10, Jesse Taube wrote:
> From: Giulio Benetti <giulio.benetti@benettiengineering.com>
>
> Add i.MXRT1050 defconfig, that will be the basis for the i.MXRT family.

here we need a generic imxrt_defconfig file for i.MXRT1xxx family, like
sunxi_defconfig, stm32_defconfig etc.

Kind regards
--
Giulio Benetti
Benetti Engineering sas

> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
> ---
> V1->V2:
> * Nothing done
> V2->V3:
> * Nothing done
> V3->V4:
> * Remove unnecessary CONFIGs
> * Add futex suport after "ARM: 9122/1: select HAVE_FUTEX_CMPXCHG"
> 9d417cbe36eee7afdd85c2e871685f8dab7c2dba
> ---
> arch/arm/configs/imxrt_defconfig | 35 ++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 arch/arm/configs/imxrt_defconfig
>
> diff --git a/arch/arm/configs/imxrt_defconfig b/arch/arm/configs/imxrt_defconfig
> new file mode 100644
> index 000000000000..52dba3762996
> --- /dev/null
> +++ b/arch/arm/configs/imxrt_defconfig
> @@ -0,0 +1,35 @@
> +# CONFIG_LOCALVERSION_AUTO is not set
> +CONFIG_BPF_SYSCALL=y
> +CONFIG_SCHED_AUTOGROUP=y
> +# CONFIG_MMU is not set
> +CONFIG_ARCH_MXC=y
> +CONFIG_SOC_IMXRT=y
> +CONFIG_SET_MEM_PARAM=y
> +CONFIG_DRAM_BASE=0x80000000
> +CONFIG_DRAM_SIZE=0x02000000
> +CONFIG_BINFMT_FLAT=y
> +CONFIG_UEVENT_HELPER=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +CONFIG_IMX_WEIM=y
> +CONFIG_LEGACY_PTY_COUNT=2
> +CONFIG_SERIAL_FSL_LPUART=y
> +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
> +CONFIG_SERIAL_DEV_BUS=y
> +CONFIG_PINCTRL_IMXRT1050=y
> +CONFIG_GPIO_MXC=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_ESDHC_IMX=y
> +CONFIG_DMADEVICES=y
> +CONFIG_FSL_EDMA=y
> +CONFIG_CLK_IMXRT1050=y
> +CONFIG_EXT4_FS=y
> +CONFIG_EXT4_FS_POSIX_ACL=y
> +CONFIG_EXT4_FS_SECURITY=y
> +CONFIG_VFAT_FS=y
> +CONFIG_FAT_DEFAULT_UTF8=y
> +CONFIG_EXFAT_FS=y
> +CONFIG_NLS_ASCII=y
> +CONFIG_NLS_UTF8=y
>