> On RZ/G3S the following were checked:
> - run bonnie++ on all the SDHIs (with SD card and eMMC, where possible)
> - unbind/bind on all the SDHIs and run bonnie++ (with SD card and eMMC,
>   where possible) after re-bind
> - 32 consecutive suspend/resume (s2idle and deep) and run bonnie++ (with SD
>   card and eMMC where possible) after resume
> 
> bonnie++ tests were executed after boot on RZ/G2{H, M, N, L, UL}, RZ/V2L.

Thanks, I did some lighter testing on R-Car D3 with bind/unbind and
suspend-to-ram. Focussing on areas you modified. No regressions, all
worked fine.

Can I get the I3C pinctrl patch for G3S now as a reward? :)