From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Hunter Subject: Re: [tegra186]: emmc resume failing after booting from snapshot image Date: Wed, 22 Nov 2017 16:15:58 +0000 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Pintu Kumar Cc: Mikko Perttunen , linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-tegra@vger.kernel.org List-Id: linux-mmc@vger.kernel.org On 22/11/17 12:26, Pintu Kumar wrote: > Hello Jon, > Yes I raised my query there almost 1 week back here. > https://devtalk.nvidia.com/default/topic/1026527/jetson-tx2/-jetson-tx2-mmc-resume-errors-after-booting-from-suspend/ > > But no response. > So, I thought to discuss it here. > May be some pointers may help to find the root cause. > One point is that, I am able to resume the board with the sd-card, but > resume from emmc is returning -110 (may be CMD5 timeout). > Whether there is any difference between sd-card resume and emmc resume ? > Do we need to check the card initialization sequence for emmc ? OK great. There should be a team looking at these so please bare with them. I noticed that you did not state which release you are using for TX2 and there are two available (r27 and r28.1 [0]), unless I missed it. So it is worth stating the release you are using. What command are you using to suspend to disk? Cheers Jon [0] https://developer.nvidia.com/embedded/linux-tegra-archive -- nvpublic