Re: [PATCH v5 1/5] mmc: dt-bindings: add ZTE ZX296718 MMC bindings

[Shawn Lin <shawn.lin@rock-chips.com>]

On 2016/11/8 9:24, Jun Nie wrote:
> Document the device-tree binding of ZTE MMC host on
> ZX296718 SoC.
>
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  .../devicetree/bindings/mmc/zx-dw-mshc.txt         | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
> new file mode 100644
> index 0000000..c175c4b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
> @@ -0,0 +1,35 @@
> +* ZTE specific extensions to the Synopsys Designware Mobile Storage
> +  Host Controller
> +
> +The Synopsys designware mobile storage host controller is used to interface
> +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
> +differences between the core Synopsys dw mshc controller properties described
> +by synopsys-dw-mshc.txt and the properties used by the ZTE specific
> +extensions to the Synopsys Designware Mobile Storage Host Controller.
> +
> +Required Properties:
> +
> +* compatible: should be
> +	- "zte,zx296718-dw-mshc": for ZX SoCs
> +
> +Example:
> +
> +	mmc1: mmc@1110000 {
> +		compatible = "zte,zx296718-dw-mshc";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0x01110000 0x1000>;
> +		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> +		fifo-depth = <32>;
> +		data-addr = <0x200>;
> +		fifo-watermark-aligned;
> +		bus-width = <4>;
> +		clock-frequency = <50000000>;

do you need both clock-frequency and max-frequency here?

> +		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
> +		clock-names = "biu", "ciu";
> +		num-slots = <1>;
> +		max-frequency = <50000000>;
> +		cap-sdio-irq;
> +		cap-sd-highspeed;
> +		status = "disabled";
> +	};
>


-- 
Best Regards
Shawn Lin