From: Adrian Hunter <adrian.hunter@intel.com>
To: Michael Walle <michael@walle.cc>, linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>,
yangbo lu <yangbo.lu@freescale.com>
Subject: Re: [PATCH v3] mmc: sdhci-of-esdhc: fixup PRESENT_STATE read
Date: Tue, 15 Nov 2016 09:11:04 +0200 [thread overview]
Message-ID: <bd5c78ca-746a-2a96-4b44-ee14ce39b917@intel.com> (raw)
In-Reply-To: <1479136348-30706-1-git-send-email-michael@walle.cc>
On 14/11/16 17:12, Michael Walle wrote:
> Since commit 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy
> cards in __mmc_switch()") the ESDHC driver is broken:
> mmc0: Card stuck in programming state! __mmc_switch
> mmc0: error -110 whilst initialising MMC card
>
> Since this commit __mmc_switch() uses ->card_busy(), which is
> sdhci_card_busy() for the esdhc driver. sdhci_card_busy() uses the
> PRESENT_STATE register, specifically the DAT0 signal level bit. But the
> ESDHC uses a non-conformant PRESENT_STATE register, thus a read fixup is
> required to make the driver work again.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> Fixes: 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()")
> ---
> v3:
> - explain the bits in the comments
> - use bits[19:0] from the original value, all other will be taken from the
> fixup value.
>
> v2:
> - use lower bits of the original value (that was actually a typo)
> - add fixes tag
> - fix typo
>
> drivers/mmc/host/sdhci-of-esdhc.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
> index fb71c86..74cf3b1 100644
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -66,6 +66,19 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
> return ret;
> }
> }
> + /*
> + * The DAT[3:0] line signal levels and the CMD line signal level are
> + * not compatible with standard SDHC register. The line signal levels
> + * DAT[7:0] are at bits 31:24 and the line signal level is at bit 23.
> + * All other bits are the same as in the standard SDHC register.
> + */
> + if (spec_reg == SDHCI_PRESENT_STATE) {
> + ret = value & 0x000fffff;
> + ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
> + ret |= (value << 1) & 0x01000000;
Please define the command line level bit in sdhci.h and use that here.
e.g.
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 766df17fb7eb..2570455b219a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -73,6 +73,7 @@
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
#define SDHCI_DATA_0_LVL_MASK 0x00100000
+#define SDHCI_CMD_LVL 0x01000000
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
> + return ret;
> + }
> +
> ret = value;
> return ret;
> }
>
next prev parent reply other threads:[~2016-11-15 7:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-14 15:12 [PATCH v3] mmc: sdhci-of-esdhc: fixup PRESENT_STATE read Michael Walle
2016-11-15 6:12 ` Y.B. Lu
2016-11-15 7:11 ` Adrian Hunter [this message]
2016-11-15 7:28 ` Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd5c78ca-746a-2a96-4b44-ee14ce39b917@intel.com \
--to=adrian.hunter@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=michael@walle.cc \
--cc=ulf.hansson@linaro.org \
--cc=yangbo.lu@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox