[PATCH v2 0/2] mmc: rtsx: add new cmd type handle and modify error handle

[PATCH v2 0/2] mmc: rtsx: add new cmd type handle and modify error handle

[micky_ching]

From: Micky Ching <micky_ching@realsil.com.cn>

v2:
fix checkpatch warning.
WARNING: Missing a blank line after declarations

v1:
Add new command type(R1 without CRC) handle, without this
patch mmc card initialize will be failed.

Using a more careful handle in request timeout, this would
improve error recover capability. Debug info is printed
using non DMA mode, this would help print more accurately
for DMA command failed. Smatch warning was removed.

Micky Ching (2):
  mmc: rtsx: add R1-no-CRC mmc command type handle
  mmc: rtsx: modify error handle and remove smatch warnings

 drivers/mmc/host/rtsx_pci_sdmmc.c |  122 +++++++++++++++++++++----------------
 1 file changed, 68 insertions(+), 54 deletions(-)

--
1.7.9.5

[PATCH v2 1/2] mmc: rtsx: add R1-no-CRC mmc command type handle

[micky_ching]

From: Micky Ching <micky_ching@realsil.com.cn>

commit a27fbf2f067b0cd6f172c8b696b9a44c58bfaa7a
<mmc: add ignorance case for CMD13 CRC error>
produced a cmd.flags unhandled in realtek pci host driver.
This will make MMC card failed initialize, this patch is
used to handle the new cmd.flags condition and MMC card can be used.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
 drivers/mmc/host/rtsx_pci_sdmmc.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 5fb994f..0d8904a 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -346,6 +346,9 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
 	case MMC_RSP_R1:
 		rsp_type = SD_RSP_TYPE_R1;
 		break;
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
+		break;
 	case MMC_RSP_R1B:
 		rsp_type = SD_RSP_TYPE_R1b;
 		break;
-- 
1.7.9.5

[PATCH v2 2/2] mmc: rtsx: modify error handle and remove smatch warnings

[micky_ching]

From: Micky Ching <micky_ching@realsil.com.cn>

Using non-DMA dump-regs, which would be more exactly for DMA transfer failed.

More careful handle when cmd/data timeout, add stop(CMD12) cmd before go to
finish request when multi-rw timeout.

Remove some static checher warings.
on commit: <mmc: rtsx: add support for pre_req and post_req>
drivers/mmc/host/rtsx_pci_sdmmc.c:194 sd_finish_request()
error: we previously assumed 'mrq' could be null (see line 158)
drivers/mmc/host/rtsx_pci_sdmmc.c:504 sd_get_rsp()
error: we previously assumed 'cmd' could be null (see line 434)
drivers/mmc/host/rtsx_pci_sdmmc.c:525 sd_pre_dma_transfer()
warn: we tested 'next' before and it was 'false'

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
 drivers/mmc/host/rtsx_pci_sdmmc.c |  119 ++++++++++++++++++++-----------------
 1 file changed, 65 insertions(+), 54 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 0d8904a..453e1d4 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -81,25 +81,24 @@ static inline void sd_clear_error(struct realtek_pci_sdmmc *host)
 }
 
 #ifdef DEBUG
+static inline void sd_print_reg(struct realtek_pci_sdmmc *host, u16 reg)
+{
+	u8 val = 0;
+
+	if (rtsx_pci_read_register(host->pcr, reg, &val) < 0)
+		dev_dbg(sdmmc_dev(host), "read 0x%04x failed\n", reg);
+	else
+		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", reg, val);
+}
+
 static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
 {
-	struct rtsx_pcr *pcr = host->pcr;
 	u16 i;
-	u8 *ptr;
-
-	/* Print SD host internal registers */
-	rtsx_pci_init_cmd(pcr);
-	for (i = 0xFDA0; i <= 0xFDAE; i++)
-		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
-	for (i = 0xFD52; i <= 0xFD69; i++)
-		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
-	rtsx_pci_send_cmd(pcr, 100);
 
-	ptr = rtsx_pci_get_cmd_data(pcr);
 	for (i = 0xFDA0; i <= 0xFDAE; i++)
-		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+		sd_print_reg(host, i);
 	for (i = 0xFD52; i <= 0xFD69; i++)
-		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+		sd_print_reg(host, i);
 }
 #else
 #define sd_print_debug_regs(host)
@@ -125,19 +124,27 @@ static void sd_request_timeout(unsigned long host_addr)
 	spin_lock_irqsave(&host->lock, flags);
 
 	if (!host->mrq) {
-		dev_err(sdmmc_dev(host), "error: no request exist\n");
-		goto out;
+		dev_err(sdmmc_dev(host), "error: request not exist\n");
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
 	}
 
-	if (host->cmd)
+	if (host->cmd && host->data)
+		dev_err(sdmmc_dev(host), "error: cmd and data conflict\n");
+
+	if (host->cmd) {
 		host->cmd->error = -ETIMEDOUT;
-	if (host->data)
-		host->data->error = -ETIMEDOUT;
+		dev_dbg(sdmmc_dev(host), "timeout for cmd %d\n",
+			host->cmd->opcode);
+		tasklet_schedule(&host->cmd_tasklet);
+	}
 
-	dev_dbg(sdmmc_dev(host), "timeout for request\n");
+	if (host->data) {
+		host->data->error = -ETIMEDOUT;
+		dev_dbg(sdmmc_dev(host), "timeout for data transfer\n");
+		tasklet_schedule(&host->data_tasklet);
+	}
 
-out:
-	tasklet_schedule(&host->finish_tasklet);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
@@ -157,7 +164,8 @@ static void sd_finish_request(unsigned long host_addr)
 	mrq = host->mrq;
 	if (!mrq) {
 		dev_err(sdmmc_dev(host), "error: no request need finish\n");
-		goto out;
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
 	}
 
 	cmd = mrq->cmd;
@@ -167,11 +175,6 @@ static void sd_finish_request(unsigned long host_addr)
 		(mrq->stop && mrq->stop->error) ||
 		(cmd && cmd->error) || (data && data->error);
 
-	if (any_error) {
-		rtsx_pci_stop_cmd(pcr);
-		sd_clear_error(host);
-	}
-
 	if (data) {
 		if (any_error)
 			data->bytes_xfered = 0;
@@ -188,7 +191,6 @@ static void sd_finish_request(unsigned long host_addr)
 	host->cmd = NULL;
 	host->data = NULL;
 
-out:
 	spin_unlock_irqrestore(&host->lock, flags);
 	mutex_unlock(&pcr->pcr_mutex);
 	mmc_request_done(host->mmc, mrq);
@@ -373,8 +375,11 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
 	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
 		err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
 				0xFF, SD_CLK_TOGGLE_EN);
-		if (err < 0)
+		if (err < 0) {
+			rtsx_pci_write_register(pcr, SD_BUS_STAT,
+				SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
 			goto out;
+		}
 	}
 
 	rtsx_pci_init_cmd(pcr);
@@ -436,7 +441,8 @@ static void sd_get_rsp(unsigned long host_addr)
 
 	if (!cmd) {
 		dev_err(sdmmc_dev(host), "error: cmd not exist\n");
-		goto out;
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
 	}
 
 	spin_lock(&pcr->lock);
@@ -446,16 +452,18 @@ static void sd_get_rsp(unsigned long host_addr)
 		err = -EINVAL;
 	spin_unlock(&pcr->lock);
 
-	if (err < 0)
+	if (err < 0) {
+		rtsx_pci_stop_cmd(host->pcr);
+		sd_print_debug_regs(host);
+		sd_clear_error(host);
 		goto out;
+	}
 
 	rsp_type = host->rsp_type;
 	stat_idx = host->rsp_len;
 
-	if (rsp_type == SD_RSP_TYPE_R0) {
-		err = 0;
+	if (rsp_type == SD_RSP_TYPE_R0)
 		goto out;
-	}
 
 	/* Eliminate returned value of CHECK_REG_CMD */
 	ptr = rtsx_pci_get_cmd_data(pcr) + 1;
@@ -498,14 +506,19 @@ static void sd_get_rsp(unsigned long host_addr)
 		goto out;
 
 	if (cmd->data) {
-		sd_start_multi_rw(host, host->mrq);
+		err = sd_start_multi_rw(host, host->mrq);
+		if (err) {
+			cmd->data->error = err;
+			dev_err(sdmmc_dev(host),
+				"error: start data transfer failed\n");
+			tasklet_schedule(&host->data_tasklet);
+		}
 		spin_unlock_irqrestore(&host->lock, flags);
 		return;
 	}
 
 out:
 	cmd->error = err;
-
 	tasklet_schedule(&host->finish_tasklet);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
@@ -525,7 +538,7 @@ static int sd_pre_dma_transfer(struct realtek_pci_sdmmc *host,
 		data->host_cookie = 0;
 	}
 
-	if (next || (!next && data->host_cookie != host->next_data.cookie))
+	if (next || data->host_cookie != host->next_data.cookie)
 		sg_count = rtsx_pci_dma_map_sg(pcr,
 				data->sg, data->sg_len, read);
 	else
@@ -580,7 +593,6 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
 	int uhs = mmc_card_uhs(card);
 	int read = data->flags & MMC_DATA_READ;
 	u8 cfg2, trans_mode;
-	int err;
 	size_t data_len = data->blksz * data->blocks;
 
 	if (host->data)
@@ -641,12 +653,7 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
 	mod_timer(&host->timer, jiffies + 10 * HZ);
 	rtsx_pci_send_cmd_no_wait(pcr);
 
-	err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
-	if (err < 0) {
-		data->error = err;
-		tasklet_schedule(&host->finish_tasklet);
-	}
-	return 0;
+	return rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
 }
 
 static void sd_finish_multi_rw(unsigned long host_addr)
@@ -660,8 +667,9 @@ static void sd_finish_multi_rw(unsigned long host_addr)
 	spin_lock_irqsave(&host->lock, flags);
 
 	if (!host->data) {
-		dev_err(sdmmc_dev(host), "error: no data exist\n");
-		goto out;
+		dev_err(sdmmc_dev(host), "error: data not exist\n");
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
 	}
 
 	data = host->data;
@@ -672,19 +680,22 @@ static void sd_finish_multi_rw(unsigned long host_addr)
 	else if (pcr->trans_result != TRANS_RESULT_OK)
 		err = -EINVAL;
 
-	if (err < 0) {
+	if (err < 0)
 		data->error = err;
-		goto out;
+
+	if (data->error) {
+		rtsx_pci_stop_cmd(host->pcr);
+		sd_print_debug_regs(host);
+		sd_clear_error(host);
+		dev_dbg(sdmmc_dev(host), "data transfer failed %d\n",
+			data->error);
 	}
 
-	if (!host->mrq->sbc && data->stop) {
+	if (!host->mrq->sbc && data->stop)
 		sd_send_cmd(host, data->stop);
-		spin_unlock_irqrestore(&host->lock, flags);
-		return;
-	}
+	else
+		tasklet_schedule(&host->finish_tasklet);
 
-out:
-	tasklet_schedule(&host->finish_tasklet);
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-- 
1.7.9.5

Re: [PATCH v2 0/2] mmc: rtsx: add new cmd type handle and modify error handle

[Ulf Hansson]

On 27 March 2014 06:35,  <micky_ching@realsil.com.cn> wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> v2:
> fix checkpatch warning.
> WARNING: Missing a blank line after declarations
>
> v1:
> Add new command type(R1 without CRC) handle, without this
> patch mmc card initialize will be failed.
>
> Using a more careful handle in request timeout, this would
> improve error recover capability. Debug info is printed
> using non DMA mode, this would help print more accurately
> for DMA command failed. Smatch warning was removed.
>
> Micky Ching (2):
>   mmc: rtsx: add R1-no-CRC mmc command type handle
>   mmc: rtsx: modify error handle and remove smatch warnings
>
>  drivers/mmc/host/rtsx_pci_sdmmc.c |  122 +++++++++++++++++++++----------------
>  1 file changed, 68 insertions(+), 54 deletions(-)

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>

>
> --
> 1.7.9.5

Re: [PATCH v2 1/2] mmc: rtsx: add R1-no-CRC mmc command type handle

[micky]

Hi Chris and Ulf,

This patch should be applied to 3.15(rc), 3.14, 3.13.
without this patch the MMC card can not identified.

Best Regards.
micky.
On 03/27/2014 01:35 PM, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> commit a27fbf2f067b0cd6f172c8b696b9a44c58bfaa7a
> <mmc: add ignorance case for CMD13 CRC error>
> produced a cmd.flags unhandled in realtek pci host driver.
> This will make MMC card failed initialize, this patch is
> used to handle the new cmd.flags condition and MMC card can be used.
>
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
>   drivers/mmc/host/rtsx_pci_sdmmc.c |    3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 5fb994f..0d8904a 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -346,6 +346,9 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
>   	case MMC_RSP_R1:
>   		rsp_type = SD_RSP_TYPE_R1;
>   		break;
> +	case MMC_RSP_R1 & ~MMC_RSP_CRC:
> +		rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
> +		break;
>   	case MMC_RSP_R1B:
>   		rsp_type = SD_RSP_TYPE_R1b;
>   		break;

Re: [PATCH v2 2/2] mmc: rtsx: modify error handle and remove smatchwarnings

[micky]

Hi Chris and Ulf,

This patch is denpend on commit c42deffd5b53c9e583d83c7964854ede2f12410d.
<mmc: rtsx: add support for pre_req and post_req>, and we discard the 
previous commit.
we want discard this patch also(it it now in linux-next), need I send 
another patch to
revert or it will be discard automatically?

Best Regards.
micky.
On 03/27/2014 01:35 PM, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> Using non-DMA dump-regs, which would be more exactly for DMA transfer failed.
>
> More careful handle when cmd/data timeout, add stop(CMD12) cmd before go to
> finish request when multi-rw timeout.
>
> Remove some static checher warings.
> on commit: <mmc: rtsx: add support for pre_req and post_req>
> drivers/mmc/host/rtsx_pci_sdmmc.c:194 sd_finish_request()
> error: we previously assumed 'mrq' could be null (see line 158)
> drivers/mmc/host/rtsx_pci_sdmmc.c:504 sd_get_rsp()
> error: we previously assumed 'cmd' could be null (see line 434)
> drivers/mmc/host/rtsx_pci_sdmmc.c:525 sd_pre_dma_transfer()
> warn: we tested 'next' before and it was 'false'
>
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
>   drivers/mmc/host/rtsx_pci_sdmmc.c |  119 ++++++++++++++++++++-----------------
>   1 file changed, 65 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 0d8904a..453e1d4 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -81,25 +81,24 @@ static inline void sd_clear_error(struct realtek_pci_sdmmc *host)
>   }
>   
>   #ifdef DEBUG
> +static inline void sd_print_reg(struct realtek_pci_sdmmc *host, u16 reg)
> +{
> +	u8 val = 0;
> +
> +	if (rtsx_pci_read_register(host->pcr, reg, &val) < 0)
> +		dev_dbg(sdmmc_dev(host), "read 0x%04x failed\n", reg);
> +	else
> +		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", reg, val);
> +}
> +
>   static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
>   {
> -	struct rtsx_pcr *pcr = host->pcr;
>   	u16 i;
> -	u8 *ptr;
> -
> -	/* Print SD host internal registers */
> -	rtsx_pci_init_cmd(pcr);
> -	for (i = 0xFDA0; i <= 0xFDAE; i++)
> -		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
> -	for (i = 0xFD52; i <= 0xFD69; i++)
> -		rtsx_pci_add_cmd(pcr, READ_REG_CMD, i, 0, 0);
> -	rtsx_pci_send_cmd(pcr, 100);
>   
> -	ptr = rtsx_pci_get_cmd_data(pcr);
>   	for (i = 0xFDA0; i <= 0xFDAE; i++)
> -		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
> +		sd_print_reg(host, i);
>   	for (i = 0xFD52; i <= 0xFD69; i++)
> -		dev_dbg(sdmmc_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
> +		sd_print_reg(host, i);
>   }
>   #else
>   #define sd_print_debug_regs(host)
> @@ -125,19 +124,27 @@ static void sd_request_timeout(unsigned long host_addr)
>   	spin_lock_irqsave(&host->lock, flags);
>   
>   	if (!host->mrq) {
> -		dev_err(sdmmc_dev(host), "error: no request exist\n");
> -		goto out;
> +		dev_err(sdmmc_dev(host), "error: request not exist\n");
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		return;
>   	}
>   
> -	if (host->cmd)
> +	if (host->cmd && host->data)
> +		dev_err(sdmmc_dev(host), "error: cmd and data conflict\n");
> +
> +	if (host->cmd) {
>   		host->cmd->error = -ETIMEDOUT;
> -	if (host->data)
> -		host->data->error = -ETIMEDOUT;
> +		dev_dbg(sdmmc_dev(host), "timeout for cmd %d\n",
> +			host->cmd->opcode);
> +		tasklet_schedule(&host->cmd_tasklet);
> +	}
>   
> -	dev_dbg(sdmmc_dev(host), "timeout for request\n");
> +	if (host->data) {
> +		host->data->error = -ETIMEDOUT;
> +		dev_dbg(sdmmc_dev(host), "timeout for data transfer\n");
> +		tasklet_schedule(&host->data_tasklet);
> +	}
>   
> -out:
> -	tasklet_schedule(&host->finish_tasklet);
>   	spin_unlock_irqrestore(&host->lock, flags);
>   }
>   
> @@ -157,7 +164,8 @@ static void sd_finish_request(unsigned long host_addr)
>   	mrq = host->mrq;
>   	if (!mrq) {
>   		dev_err(sdmmc_dev(host), "error: no request need finish\n");
> -		goto out;
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		return;
>   	}
>   
>   	cmd = mrq->cmd;
> @@ -167,11 +175,6 @@ static void sd_finish_request(unsigned long host_addr)
>   		(mrq->stop && mrq->stop->error) ||
>   		(cmd && cmd->error) || (data && data->error);
>   
> -	if (any_error) {
> -		rtsx_pci_stop_cmd(pcr);
> -		sd_clear_error(host);
> -	}
> -
>   	if (data) {
>   		if (any_error)
>   			data->bytes_xfered = 0;
> @@ -188,7 +191,6 @@ static void sd_finish_request(unsigned long host_addr)
>   	host->cmd = NULL;
>   	host->data = NULL;
>   
> -out:
>   	spin_unlock_irqrestore(&host->lock, flags);
>   	mutex_unlock(&pcr->pcr_mutex);
>   	mmc_request_done(host->mmc, mrq);
> @@ -373,8 +375,11 @@ static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
>   	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
>   		err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
>   				0xFF, SD_CLK_TOGGLE_EN);
> -		if (err < 0)
> +		if (err < 0) {
> +			rtsx_pci_write_register(pcr, SD_BUS_STAT,
> +				SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
>   			goto out;
> +		}
>   	}
>   
>   	rtsx_pci_init_cmd(pcr);
> @@ -436,7 +441,8 @@ static void sd_get_rsp(unsigned long host_addr)
>   
>   	if (!cmd) {
>   		dev_err(sdmmc_dev(host), "error: cmd not exist\n");
> -		goto out;
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		return;
>   	}
>   
>   	spin_lock(&pcr->lock);
> @@ -446,16 +452,18 @@ static void sd_get_rsp(unsigned long host_addr)
>   		err = -EINVAL;
>   	spin_unlock(&pcr->lock);
>   
> -	if (err < 0)
> +	if (err < 0) {
> +		rtsx_pci_stop_cmd(host->pcr);
> +		sd_print_debug_regs(host);
> +		sd_clear_error(host);
>   		goto out;
> +	}
>   
>   	rsp_type = host->rsp_type;
>   	stat_idx = host->rsp_len;
>   
> -	if (rsp_type == SD_RSP_TYPE_R0) {
> -		err = 0;
> +	if (rsp_type == SD_RSP_TYPE_R0)
>   		goto out;
> -	}
>   
>   	/* Eliminate returned value of CHECK_REG_CMD */
>   	ptr = rtsx_pci_get_cmd_data(pcr) + 1;
> @@ -498,14 +506,19 @@ static void sd_get_rsp(unsigned long host_addr)
>   		goto out;
>   
>   	if (cmd->data) {
> -		sd_start_multi_rw(host, host->mrq);
> +		err = sd_start_multi_rw(host, host->mrq);
> +		if (err) {
> +			cmd->data->error = err;
> +			dev_err(sdmmc_dev(host),
> +				"error: start data transfer failed\n");
> +			tasklet_schedule(&host->data_tasklet);
> +		}
>   		spin_unlock_irqrestore(&host->lock, flags);
>   		return;
>   	}
>   
>   out:
>   	cmd->error = err;
> -
>   	tasklet_schedule(&host->finish_tasklet);
>   	spin_unlock_irqrestore(&host->lock, flags);
>   }
> @@ -525,7 +538,7 @@ static int sd_pre_dma_transfer(struct realtek_pci_sdmmc *host,
>   		data->host_cookie = 0;
>   	}
>   
> -	if (next || (!next && data->host_cookie != host->next_data.cookie))
> +	if (next || data->host_cookie != host->next_data.cookie)
>   		sg_count = rtsx_pci_dma_map_sg(pcr,
>   				data->sg, data->sg_len, read);
>   	else
> @@ -580,7 +593,6 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
>   	int uhs = mmc_card_uhs(card);
>   	int read = data->flags & MMC_DATA_READ;
>   	u8 cfg2, trans_mode;
> -	int err;
>   	size_t data_len = data->blksz * data->blocks;
>   
>   	if (host->data)
> @@ -641,12 +653,7 @@ static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
>   	mod_timer(&host->timer, jiffies + 10 * HZ);
>   	rtsx_pci_send_cmd_no_wait(pcr);
>   
> -	err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
> -	if (err < 0) {
> -		data->error = err;
> -		tasklet_schedule(&host->finish_tasklet);
> -	}
> -	return 0;
> +	return rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
>   }
>   
>   static void sd_finish_multi_rw(unsigned long host_addr)
> @@ -660,8 +667,9 @@ static void sd_finish_multi_rw(unsigned long host_addr)
>   	spin_lock_irqsave(&host->lock, flags);
>   
>   	if (!host->data) {
> -		dev_err(sdmmc_dev(host), "error: no data exist\n");
> -		goto out;
> +		dev_err(sdmmc_dev(host), "error: data not exist\n");
> +		spin_unlock_irqrestore(&host->lock, flags);
> +		return;
>   	}
>   
>   	data = host->data;
> @@ -672,19 +680,22 @@ static void sd_finish_multi_rw(unsigned long host_addr)
>   	else if (pcr->trans_result != TRANS_RESULT_OK)
>   		err = -EINVAL;
>   
> -	if (err < 0) {
> +	if (err < 0)
>   		data->error = err;
> -		goto out;
> +
> +	if (data->error) {
> +		rtsx_pci_stop_cmd(host->pcr);
> +		sd_print_debug_regs(host);
> +		sd_clear_error(host);
> +		dev_dbg(sdmmc_dev(host), "data transfer failed %d\n",
> +			data->error);
>   	}
>   
> -	if (!host->mrq->sbc && data->stop) {
> +	if (!host->mrq->sbc && data->stop)
>   		sd_send_cmd(host, data->stop);
> -		spin_unlock_irqrestore(&host->lock, flags);
> -		return;
> -	}
> +	else
> +		tasklet_schedule(&host->finish_tasklet);
>   
> -out:
> -	tasklet_schedule(&host->finish_tasklet);
>   	spin_unlock_irqrestore(&host->lock, flags);
>   }
>   

Re: [PATCH v2 1/2] mmc: rtsx: add R1-no-CRC mmc command type handle

[Dan Carpenter]

On Mon, Apr 28, 2014 at 07:30:52PM +0800, micky wrote:
> Hi Chris and Ulf,
> 
> This patch should be applied to 3.15(rc), 3.14, 3.13.
> without this patch the MMC card can not identified.
> 

Top posting is annoying.

If Chris and Ulf don't mind then you could actually deal with this by
yourself.  Read Documentation/stable_kernel_rules.txt

regards,
dan carpenter

Re: [PATCH v2 2/2] mmc: rtsx: modify error handle and remove smatchwarnings

[Dan Carpenter]

On Mon, Apr 28, 2014 at 07:37:49PM +0800, micky wrote:
> Hi Chris and Ulf,
> 
> This patch is denpend on commit c42deffd5b53c9e583d83c7964854ede2f12410d.
> <mmc: rtsx: add support for pre_req and post_req>, and we discard
> the previous commit.
> we want discard this patch also(it it now in linux-next), need I
> send another patch to
> revert or it will be discard automatically?

Send a patch to revert this patch as well.  You should have sent both
at the same time so it didn't cause breakage...

regards,
dan carpenter