Re: [PATCH v2 0/3] StarFive's SDIO/eMMC driver support

[William Qiu <william.qiu@starfivetech.com>]

On 2022/12/27 20:22, William Qiu wrote:
> Hi,
> 
> This patchset adds initial rudimentary support for the StarFive
> designware mobile storage host controller driver. And this driver will
> be used in StarFive's VisionFive 2 board. The main purpose of adding
> this driver is to accommodate the ultra-high speed mode of eMMC.
> 
> The last patch should be applied after the patchset [1]:
> [1] https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@starfivetech.com/
> 
> Changes since v1:
> - Renamed the dt-binding 'starfive,jh7110-sdio.yaml' to 'starfive,jh7110-mmc.yaml'.
> - Changed the type of 'starfive,syscon' and modify its description.
> - Deleted unused head files like '#include <linux/gpio.h>'.
> - Added comment for the 'rise_point' and 'fall_point'.
> - Changed the API 'num_caps' to 'common_caps'.
> - Changed the node name 'sys_syscon' to 'syscon'.
> - Changed the node name 'sdio' to 'mmc'.
> 
> The patch series is based on v6.1-rc5.
> 
> William Qiu (3):
>   dt-bindings: mmc: Add bindings for StarFive
>   mmc: starfive: Add sdio/emmc driver support
>   riscv: dts: starfive: Add mmc node
> 
>  .../bindings/mmc/starfive,jh7110-mmc.yaml     |  72 +++++++
>  MAINTAINERS                                   |   6 +
>  .../jh7110-starfive-visionfive-v2.dts         |  25 +++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  38 ++++
>  drivers/mmc/host/Kconfig                      |  10 +
>  drivers/mmc/host/Makefile                     |   1 +
>  drivers/mmc/host/dw_mmc-starfive.c            | 185 ++++++++++++++++++
>  7 files changed, 337 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
>  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
> 
> --
> 2.34.1
> 

Hi Rob/Jaehoon,

Could you please help to review and provide comments on this patch series?
Thank you in advance.

Best regards,
William Qiu