[PATCH v3 1/9] mmc: meson: Assign the minimum clk rate as close to 400KHz as possible

[Heiner Kallweit <hkallweit1@gmail.com>]

The current code dealing with calculating mmc->f_min is a bit complicated.
Additionally, the attempt to set an initial clock rate should explicitly
use a rate between 100KHz to 400 KHz, according the (e)MMC/SD specs, which
it doesn't.

Fix the problem and clean up the code by using clk_round_rate() to pick the
nearest minimum rate to 400KHz (rounded down from 400kHz).

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v3:
- remove now unused member mux_parent_rate from struct meson_host
- change target min rate from 100kHz to 400kHz because actual min rate
  on meson is 380kHz. Therefore 100kHz would be rounded down to 0.
---
 drivers/mmc/host/meson-gx-mmc.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 5eca88bc..ef2ce725 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -132,7 +132,6 @@ struct meson_host {
 	struct clk_mux mux;
 	struct clk *mux_clk;
 	struct clk *mux_parent[MUX_CLK_NUM_PARENTS];
-	unsigned long mux_parent_rate[MUX_CLK_NUM_PARENTS];
 
 	struct clk_divider cfg_div;
 	struct clk *cfg_div_clk;
@@ -240,7 +239,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
 	const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
 	unsigned int mux_parent_count = 0;
 	const char *clk_div_parents[1];
-	unsigned int f_min = UINT_MAX;
 	u32 clk_reg, cfg;
 
 	/* get the mux parents */
@@ -257,20 +255,10 @@ static int meson_mmc_clk_init(struct meson_host *host)
 			return ret;
 		}
 
-		host->mux_parent_rate[i] = clk_get_rate(host->mux_parent[i]);
 		mux_parent_names[i] = __clk_get_name(host->mux_parent[i]);
 		mux_parent_count++;
-		if (host->mux_parent_rate[i] < f_min)
-			f_min = host->mux_parent_rate[i];
 	}
 
-	/* cacluate f_min based on input clocks, and max divider value */
-	if (f_min != UINT_MAX)
-		f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
-	else
-		f_min = 4000000;  /* default min: 400 MHz */
-	host->mmc->f_min = f_min;
-
 	/* create the mux */
 	snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
 	init.name = clk_name;
@@ -325,9 +313,13 @@ static int meson_mmc_clk_init(struct meson_host *host)
 	writel(cfg, host->regs + SD_EMMC_CFG);
 
 	ret = clk_prepare_enable(host->cfg_div_clk);
-	if (!ret)
-		ret = meson_mmc_clk_set(host, f_min);
+	if (ret)
+		return ret;
+
+	/* Get the nearest minimum clock to 400KHz */
+	host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
 
+	ret = meson_mmc_clk_set(host, host->mmc->f_min);
 	if (!ret)
 		clk_disable_unprepare(host->cfg_div_clk);
 
-- 
2.11.0