Linux MultiMedia Card development
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Victor Shih <victorshihgli@gmail.com>, ulf.hansson@linaro.org
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw,
	Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org,
	dlunev@chromium.org, Ben Chuang <ben.chuang@genesyslogic.com.tw>,
	Victor Shih <victor.shih@genesyslogic.com.tw>
Subject: Re: [PATCH V10 20/23] mmc: sdhci-uhs2: add add_host() and others to set up the driver
Date: Thu, 31 Aug 2023 11:34:51 +0300	[thread overview]
Message-ID: <e8ed5409-5a00-9478-5b91-85d54b7fb2bb@intel.com> (raw)
In-Reply-To: <20230818100217.12725-21-victorshihgli@gmail.com>

On 18/08/23 13:02, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
> 
> This is a UHS-II version of sdhci's add_host/remove_host operation.
> Any sdhci drivers which are capable of handling UHS-II cards must
> call those functions instead of the corresponding sdhci's.
> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> 
> Updates in V10:
>  - Move some definitions of PatchV9[05/23] to PatchV10[20/23].
> 
> Updates in V8:
>  - Change return type to void for __sdhci_uhs2_add_host_v4().
>  - Remove unused variables in __sdhci_uhs2_add_host_v4().
> 
> Updates in V7:
>  - __sdhci_add_host() to instead of __sdhci_uhs2_add_host()
>    in sdhci_uhs2_add_host().
>  - Cancel export state of some functions.
> 
> Updates in V6:
>  - Add complete_work_fn/thread_irq_fn variables in struct sdhci_host.
>  - Use complete_work_fn/thread_irq_fn variables in
>    sdhci_alloc_host() and sdhci_uhs2_add_host().
>  - Use sdhci_uhs2_mode() to simplify code in __sdhci_uhs2_remove_host().
> 
> ---
> 
>  drivers/mmc/host/sdhci-uhs2.c | 102 ++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci-uhs2.h |   2 +
>  drivers/mmc/host/sdhci.c      |   7 ++-
>  drivers/mmc/host/sdhci.h      |   3 +
>  include/linux/mmc/host.h      |   1 +
>  5 files changed, 113 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 8d1be670af49..80eafacc8b9f 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -16,6 +16,7 @@
>  #include <linux/bitfield.h>
>  #include <linux/mmc/mmc.h>
>  #include <linux/mmc/host.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include "sdhci.h"
>  #include "sdhci-uhs2.h"
> @@ -997,6 +998,107 @@ static irqreturn_t sdhci_uhs2_thread_irq(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> +/*****************************************************************************\
> + *
> + * Device allocation/registration                                            *
> + *                                                                           *
> +\*****************************************************************************/
> +
> +static void __sdhci_uhs2_add_host_v4(struct sdhci_host *host, u32 caps1)
> +{
> +	struct mmc_host *mmc;
> +	u32 max_current_caps2;
> +
> +	mmc = host->mmc;
> +
> +	/* Support UHS2 */
> +	if (caps1 & SDHCI_SUPPORT_UHS2)
> +		mmc->caps2 |= MMC_CAP2_SD_UHS2;
> +
> +	max_current_caps2 = sdhci_readl(host, SDHCI_MAX_CURRENT_1);
> +
> +	if ((caps1 & SDHCI_CAN_VDD2_180) &&
> +	    !max_current_caps2 &&
> +	    !IS_ERR(mmc->supply.vmmc2)) {
> +		/* UHS2 - VDD2 */
> +		int curr = regulator_get_current_limit(mmc->supply.vmmc2);
> +
> +		if (curr > 0) {
> +			/* convert to SDHCI_MAX_CURRENT format */
> +			curr = curr / 1000;  /* convert to mA */
> +			curr = curr / SDHCI_MAX_CURRENT_MULTIPLIER;
> +			curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
> +			max_current_caps2 = curr;
> +		}
> +	}
> +
> +	if (caps1 & SDHCI_CAN_VDD2_180)
> +		mmc->ocr_avail_uhs2 |= MMC_VDD_165_195;
> +	else
> +		mmc->caps2 &= ~MMC_CAP2_SD_UHS2;
> +}
> +
> +static int sdhci_uhs2_host_ops_init(struct sdhci_host *host);
> +
> +static void __sdhci_uhs2_remove_host(struct sdhci_host *host, int dead)
> +{
> +	if (!sdhci_uhs2_mode(host))
> +		return;
> +
> +	if (!dead)
> +		sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_FULL);
> +}
> +
> +int sdhci_uhs2_add_host(struct sdhci_host *host)
> +{
> +	struct mmc_host *mmc = host->mmc;
> +	int ret;
> +
> +	ret = sdhci_setup_host(host);
> +	if (ret)
> +		return ret;
> +
> +	if (host->version >= SDHCI_SPEC_400)
> +		__sdhci_uhs2_add_host_v4(host, host->caps1);
> +
> +	if ((mmc->caps2 & MMC_CAP2_SD_UHS2) && !host->v4_mode)
> +		/* host doesn't want to enable UHS2 support */
> +		mmc->caps2 &= ~MMC_CAP2_SD_UHS2;
> +
> +	/* overwrite ops */
> +	if (mmc->caps2 & MMC_CAP2_SD_UHS2)
> +		sdhci_uhs2_host_ops_init(host);
> +
> +	host->complete_work_fn = sdhci_uhs2_complete_work;
> +	host->thread_irq_fn    = sdhci_uhs2_thread_irq;
> +
> +	/* LED support not implemented for UHS2 */
> +	host->quirks |= SDHCI_QUIRK_NO_LED;
> +
> +	ret = __sdhci_add_host(host);
> +	if (ret)
> +		goto cleanup;
> +
> +	return 0;
> +
> +cleanup:
> +	if (host->version >= SDHCI_SPEC_400)
> +		__sdhci_uhs2_remove_host(host, 0);
> +
> +	sdhci_cleanup_host(host);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_add_host);
> +
> +void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead)
> +{
> +	__sdhci_uhs2_remove_host(host, dead);
> +
> +	sdhci_remove_host(host, dead);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_remove_host);
> +
>  void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq)
>  {
>  	struct sdhci_host *host = mmc_priv(mmc);
> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> index 3aa2cb4b39d6..bd5aae054c6f 100644
> --- a/drivers/mmc/host/sdhci-uhs2.h
> +++ b/drivers/mmc/host/sdhci-uhs2.h
> @@ -186,5 +186,7 @@ void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
>  void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq);
>  int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
>  u32 sdhci_uhs2_irq(struct sdhci_host *host, u32 intmask);
> +int sdhci_uhs2_add_host(struct sdhci_host *host);
> +void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead);
>  
>  #endif /* __SDHCI_UHS2_H */
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 318d4830732f..b3de7e30ba54 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -4104,6 +4104,9 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,
>  
>  	host->max_timeout_count = 0xE;
>  
> +	host->complete_work_fn = sdhci_complete_work;
> +	host->thread_irq_fn    = sdhci_thread_irq;
> +
>  	return host;
>  }
>  
> @@ -4853,7 +4856,7 @@ int __sdhci_add_host(struct sdhci_host *host)
>  	if (!host->complete_wq)
>  		return -ENOMEM;
>  
> -	INIT_WORK(&host->complete_work, sdhci_complete_work);
> +	INIT_WORK(&host->complete_work, host->complete_work_fn);
>  
>  	timer_setup(&host->timer, sdhci_timeout_timer, 0);
>  	timer_setup(&host->data_timer, sdhci_timeout_data_timer, 0);
> @@ -4862,7 +4865,7 @@ int __sdhci_add_host(struct sdhci_host *host)
>  
>  	sdhci_init(host, 0);
>  
> -	ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
> +	ret = request_threaded_irq(host->irq, sdhci_irq, host->thread_irq_fn,
>  				   IRQF_SHARED,	mmc_hostname(mmc), host);
>  	if (ret) {
>  		pr_err("%s: Failed to request IRQ %d: %d\n",
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 6bbb9f073f29..5235f2da6568 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -626,6 +626,9 @@ struct sdhci_host {
>  	struct timer_list timer;	/* Timer for timeouts */
>  	struct timer_list data_timer;	/* Timer for data timeouts */
>  
> +	void		(*complete_work_fn)(struct work_struct *work);
> +	irqreturn_t	(*thread_irq_fn)(int irq, void *dev_id);
> +
>  #if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
>  	struct dma_chan *rx_chan;
>  	struct dma_chan *tx_chan;
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 1eba64228725..918d4998c1de 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -379,6 +379,7 @@ struct mmc_host {
>  	u32			ocr_avail_sdio;	/* SDIO-specific OCR */
>  	u32			ocr_avail_sd;	/* SD-specific OCR */
>  	u32			ocr_avail_mmc;	/* MMC-specific OCR */
> +	u32			ocr_avail_uhs2; /* UHS2-specific OCR */

ocr_avail_uhs2 gets set but doesn't seem to be used

>  	struct wakeup_source	*ws;		/* Enable consume of uevents */
>  	u32			max_current_330;
>  	u32			max_current_300;


  reply	other threads:[~2023-08-31  8:36 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-18 10:01 [PATCH V10 00/23] Add support UHS-II for GL9755 Victor Shih
2023-08-18 10:01 ` [PATCH V10 01/23] mmc: core: Cleanup printing of speed mode at card insertion Victor Shih
2023-08-18 10:01 ` [PATCH V10 02/23] mmc: core: Prepare to support SD UHS-II cards Victor Shih
2023-08-18 10:01 ` [PATCH V10 03/23] mmc: core: Announce successful insertion of an SD UHS-II card Victor Shih
2023-08-18 10:01 ` [PATCH V10 04/23] mmc: core: Extend support for mmc regulators with a vqmmc2 Victor Shih
2023-08-18 10:01 ` [PATCH V10 05/23] mmc: core: Add definitions for SD UHS-II cards Victor Shih
2023-08-18 10:02 ` [PATCH V10 06/23] mmc: core: Support UHS-II card control and access Victor Shih
2023-08-18 10:02 ` [PATCH V10 07/23] mmc: sdhci: add UHS-II related definitions in headers Victor Shih
2023-08-18 10:02 ` [PATCH V10 08/23] mmc: sdhci: add UHS-II module and add a kernel configuration Victor Shih
2023-08-18 10:02 ` [PATCH V10 09/23] mmc: sdhci-uhs2: dump UHS-II registers Victor Shih
2023-08-18 10:02 ` [PATCH V10 10/23] mmc: sdhci-uhs2: add reset function and uhs2_mode function Victor Shih
2023-08-18 10:02 ` [PATCH V10 11/23] mmc: sdhci-uhs2: add set_power() to support vdd2 Victor Shih
2023-08-31  8:26   ` Adrian Hunter
2023-08-18 10:02 ` [PATCH V10 12/23] mmc: sdhci-uhs2: skip signal_voltage_switch() Victor Shih
2023-08-18 10:02 ` [PATCH V10 13/23] mmc: sdhci-uhs2: add set_timeout() Victor Shih
2023-08-18 10:02 ` [PATCH V10 14/23] mmc: sdhci-uhs2: add set_ios() Victor Shih
2023-08-18 10:02 ` [PATCH V10 15/23] mmc: sdhci-uhs2: add detect_init() to detect the interface Victor Shih
2023-08-18 10:02 ` [PATCH V10 16/23] mmc: sdhci-uhs2: add clock operations Victor Shih
2023-08-18 10:02 ` [PATCH V10 17/23] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface Victor Shih
2023-08-18 10:02 ` [PATCH V10 18/23] mmc: sdhci-uhs2: add request() and others Victor Shih
2023-08-31  8:33   ` Adrian Hunter
2023-08-31 10:33     ` Victor Shih
2023-08-31 11:20       ` Adrian Hunter
2023-09-06 16:14         ` Victor Shih
2023-09-12 12:39           ` Adrian Hunter
2023-09-15  9:40             ` Victor Shih
2023-08-18 10:02 ` [PATCH V10 19/23] mmc: sdhci-uhs2: add irq() " Victor Shih
2023-08-18 10:02 ` [PATCH V10 20/23] mmc: sdhci-uhs2: add add_host() and others to set up the driver Victor Shih
2023-08-31  8:34   ` Adrian Hunter [this message]
2023-09-08  9:56     ` Victor Shih
2023-08-18 10:02 ` [PATCH V10 21/23] mmc: sdhci-uhs2: add pre-detect_init hook Victor Shih
2023-08-18 10:02 ` [PATCH V10 22/23] mmc: sdhci-pci: add UHS-II support framework Victor Shih
2023-08-18 10:02 ` [PATCH V10 23/23] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Victor Shih
2023-08-26  2:13 ` [PATCH V10 00/23] Add support UHS-II " Victor Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e8ed5409-5a00-9478-5b91-85d54b7fb2bb@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=Greg.tu@genesyslogic.com.tw \
    --cc=HL.Liu@genesyslogic.com.tw \
    --cc=ben.chuang@genesyslogic.com.tw \
    --cc=benchuanggli@gmail.com \
    --cc=dlunev@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=takahiro.akashi@linaro.org \
    --cc=ulf.hansson@linaro.org \
    --cc=victor.shih@genesyslogic.com.tw \
    --cc=victorshihgli@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox