Re: [PATCH v4 4/5] arm64: dts: rockchip: Add SDMMC/SDIO controllers for RK3528

[Jonas Karlman <jonas@kwiboo.se>]

On 2025-04-17 16:36, Yao Zi wrote:
> RK3528 features two SDIO controllers and one SD/MMC controller, describe
> them in devicetree. Since their sample and drive clocks are located in
> the VO and VPU GRFs, corresponding syscons are added to make these
> clocks available.
> 
> Signed-off-by: Yao Zi <ziyao@disroot.org>

SD-cards and SDIO WiFi is detected on my RK3528 boards with help of this
so this is:

Reviewed-by: Jonas Karlman <jonas@kwiboo.se>

> ---
>  arch/arm64/boot/dts/rockchip/rk3528.dtsi | 69 ++++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
> index 826f9be0be19..931d4ac004c5 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
> @@ -321,6 +321,16 @@ qos_vpu: qos@ff280400 {
>  			reg = <0x0 0xff280400 0x0 0x20>;
>  		};
>  
> +		vpu_grf: syscon@ff340000 {
> +			compatible = "rockchip,rk3528-vpu-grf", "syscon";
> +			reg = <0x0 0xff340000 0x0 0x8000>;
> +		};
> +
> +		vo_grf: syscon@ff360000 {
> +			compatible = "rockchip,rk3528-vo-grf", "syscon";
> +			reg = <0x0 0xff360000 0x0 0x10000>;
> +		};

Adding these two syscons could possible be split out into a separate
patch as they are also needed for adding support for the two Ethernet
controllers [1], the GMAC driver already landed in v6.15-rc1.

[1] https://lore.kernel.org/all/20250310001254.1516138-1-jonas@kwiboo.se/

Regards,
Jonas

> +
>  		cru: clock-controller@ff4a0000 {
>  			compatible = "rockchip,rk3528-cru";
>  			reg = <0x0 0xff4a0000 0x0 0x30000>;
> @@ -501,6 +511,65 @@ sdhci: mmc@ffbf0000 {
>  			status = "disabled";
>  		};
>  
> +		sdio0: mmc@ffc10000 {
> +			compatible = "rockchip,rk3528-dw-mshc",
> +				     "rockchip,rk3288-dw-mshc";
> +			reg = <0x0 0xffc10000 0x0 0x4000>;
> +			clocks = <&cru HCLK_SDIO0>,
> +				 <&cru CCLK_SRC_SDIO0>,
> +				 <&cru SCLK_SDIO0_DRV>,
> +				 <&cru SCLK_SDIO0_SAMPLE>;
> +			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> +			fifo-depth = <0x100>;
> +			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
> +			max-frequency = <200000000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&sdio0_bus4>, <&sdio0_clk>, <&sdio0_cmd>;
> +			resets = <&cru SRST_H_SDIO0>;
> +			reset-names = "reset";
> +			status = "disabled";
> +		};
> +
> +		sdio1: mmc@ffc20000 {
> +			compatible = "rockchip,rk3528-dw-mshc",
> +				     "rockchip,rk3288-dw-mshc";
> +			reg = <0x0 0xffc20000 0x0 0x4000>;
> +			clocks = <&cru HCLK_SDIO1>,
> +				 <&cru CCLK_SRC_SDIO1>,
> +				 <&cru SCLK_SDIO1_DRV>,
> +				 <&cru SCLK_SDIO1_SAMPLE>;
> +			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> +			fifo-depth = <0x100>;
> +			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +			max-frequency = <200000000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&sdio1_bus4>, <&sdio1_clk>, <&sdio1_cmd>;
> +			resets = <&cru SRST_H_SDIO1>;
> +			reset-names = "reset";
> +			status = "disabled";
> +		};
> +
> +		sdmmc: mmc@ffc30000 {
> +			compatible = "rockchip,rk3528-dw-mshc",
> +				     "rockchip,rk3288-dw-mshc";
> +			reg = <0x0 0xffc30000 0x0 0x4000>;
> +			clocks = <&cru HCLK_SDMMC0>,
> +				 <&cru CCLK_SRC_SDMMC0>,
> +				 <&cru SCLK_SDMMC_DRV>,
> +				 <&cru SCLK_SDMMC_SAMPLE>;
> +			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> +			fifo-depth = <0x100>;
> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +			max-frequency = <150000000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>,
> +				    <&sdmmc_det>;
> +			resets = <&cru SRST_H_SDMMC0>;
> +			reset-names = "reset";
> +			rockchip,default-sample-phase = <90>;
> +			status = "disabled";
> +		};
> +
>  		dmac: dma-controller@ffd60000 {
>  			compatible = "arm,pl330", "arm,primecell";
>  			reg = <0x0 0xffd60000 0x0 0x4000>;