From: Adrian Hunter <adrian.hunter@intel.com>
To: Prabu Thangamuthu <prabu.t@synopsys.com>,
Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
Manjunath M B <Manjunath.MB@synopsys.com>,
Prabu T <prabuchml@gmail.com>
Subject: Re: [PATCH v3 1/1] mmc: sdhci-pci-dwc-mshc: synopsys dwc mshc support
Date: Wed, 11 Jul 2018 11:40:44 +0300 [thread overview]
Message-ID: <fa16865b-9a23-d833-cad8-ce8ece660343@intel.com> (raw)
In-Reply-To: <1531295777-9515-1-git-send-email-prabu.t@synopsys.com>
On 11/07/18 10:56, Prabu Thangamuthu wrote:
> Synopsys has DWC MSHC controller on HPAS-DX platform connected using PCIe
> interface with SD card slot and eMMC device slots. This patch is to
> enable SD cards connected on this platform. As Clock generation logic
> is implemented using MMCM module of HAPS-DX platform, we have separate
> functions to control the MMCM to generate required clocks with respect
> to speed mode.
>
> Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
> V3 - Updated License.
> Re-sending the patch using git send-email.
> V2 - Removed sdhci-pci-dwc-mshc.h and moved into sdhci-pci-dwc-mshc.c
> Fixed the coding style issue.
> Removed sdhci_snps_set_power and new approach to support eMMC device
> voltages will be submitted after completeing validations.
> V1 - Initial Patch.
>
> MAINTAINERS | 7 +++
> drivers/mmc/host/Makefile | 3 +-
> drivers/mmc/host/sdhci-pci-core.c | 1 +
> drivers/mmc/host/sdhci-pci-dwc-mshc.c | 84 +++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-pci.h | 3 ++
> 5 files changed, 97 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mmc/host/sdhci-pci-dwc-mshc.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a29d10f..d062f51 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12813,6 +12813,13 @@ S: Maintained
> F: drivers/mmc/host/sdhci*
> F: include/linux/mmc/sdhci*
>
> +SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER
> +M: Prabu Thangamuthu <prabu.t@synopsys.com>
> +M: Manjunath M B <manjumb@synopsys.com>
> +L: linux-mmc@vger.kernel.org
> +S: Maintained
> +F: drivers/mmc/host/sdhci-pci-dwc-mshc.c
> +
> SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
> M: Ben Dooks <ben-linux@fluff.org>
> M: Jaehoon Chung <jh80.chung@samsung.com>
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index a18fbba..ce8398e 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -11,7 +11,8 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o
> obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> obj-$(CONFIG_MMC_SDHCI) += sdhci.o
> obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
> -sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o
> +sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
> + sdhci-pci-dwc-mshc.o
> obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
> obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
> obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 3d36761..7bfd366 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -1513,6 +1513,7 @@ static int amd_probe(struct sdhci_pci_chip *chip)
> SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
> SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
> SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
> + SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
> /* Generic SD host controller */
> {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
> diff --git a/drivers/mmc/host/sdhci-pci-dwc-mshc.c b/drivers/mmc/host/sdhci-pci-dwc-mshc.c
> new file mode 100644
> index 0000000..f78d654
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-pci-dwc-mshc.c
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SDHCI driver for Synopsys DWC_MSHC controller
> + *
> + * Copyright (C) 2018 Synopsys, Inc. (www.synopsys.com)
> + *
> + * Authors:
> + * Prabu Thangamuthu <prabu.t@synopsys.com>
> + * Manjunath M B <manjumb@synopsys.com>
> + */
> +
> +#include "sdhci.h"
> +#include "sdhci-pci.h"
> +
> +#define SDHCI_VENDOR_PTR_R 0xE8
> +
> +/* Synopsys vendor specific registers */
> +#define SDHC_GPIO_OUT 0x34
> +#define SDHC_AT_CTRL_R 0x40
> +#define SDHC_SW_TUNE_EN 0x00000010
> +
> +/* MMCM DRP */
> +#define SDHC_MMCM_DIV_REG 0x1020
> +#define DIV_REG_100_MHZ 0x1145
> +#define DIV_REG_200_MHZ 0x1083
> +#define SDHC_MMCM_CLKFBOUT 0x1024
> +#define CLKFBOUT_100_MHZ 0x0000
> +#define CLKFBOUT_200_MHZ 0x0080
> +#define SDHC_CCLK_MMCM_RST 0x00000001
> +
> +static void sdhci_snps_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + u16 clk;
> + u32 reg, vendor_ptr;
> +
> + vendor_ptr = sdhci_readw(host, SDHCI_VENDOR_PTR_R);
> +
> + /* Disable software managed rx tuning */
> + reg = sdhci_readl(host, (SDHC_AT_CTRL_R + vendor_ptr));
> + reg &= ~SDHC_SW_TUNE_EN;
> + sdhci_writel(host, reg, (SDHC_AT_CTRL_R + vendor_ptr));
> +
> + if (clock <= 52000000) {
> + sdhci_set_clock(host, clock);
> + } else {
> + /* Assert reset to MMCM */
> + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr));
> + reg |= SDHC_CCLK_MMCM_RST;
> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr));
> +
> + /* Configure MMCM */
> + if (clock == 100000000) {
> + sdhci_writel(host, DIV_REG_100_MHZ, SDHC_MMCM_DIV_REG);
> + sdhci_writel(host, CLKFBOUT_100_MHZ,
> + SDHC_MMCM_CLKFBOUT);
> + } else {
> + sdhci_writel(host, DIV_REG_200_MHZ, SDHC_MMCM_DIV_REG);
> + sdhci_writel(host, CLKFBOUT_200_MHZ,
> + SDHC_MMCM_CLKFBOUT);
> + }
> +
> + /* De-assert reset to MMCM */
> + reg = sdhci_readl(host, (SDHC_GPIO_OUT + vendor_ptr));
> + reg &= ~SDHC_CCLK_MMCM_RST;
> + sdhci_writel(host, reg, (SDHC_GPIO_OUT + vendor_ptr));
> +
> + /* Enable clock */
> + clk = SDHCI_PROG_CLOCK_MODE | SDHCI_CLOCK_INT_EN |
> + SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> + }
> +}
> +
> +static const struct sdhci_ops sdhci_snps_ops = {
> + .set_clock = sdhci_snps_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_snps = {
> + .ops = &sdhci_snps_ops,
> +};
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index 59af288..2ef0bdc 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -61,6 +61,8 @@
> #define PCI_VENDOR_ID_ARASAN 0x16e6
> #define PCI_DEVICE_ID_ARASAN_PHY_EMMC 0x0670
>
> +#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
> +
> /*
> * PCI device class and mask
> */
> @@ -184,5 +186,6 @@ static inline void *sdhci_pci_priv(struct sdhci_pci_slot *slot)
> #endif
>
> extern const struct sdhci_pci_fixes sdhci_arasan;
> +extern const struct sdhci_pci_fixes sdhci_snps;
>
> #endif /* __SDHCI_PCI_H */
>
next prev parent reply other threads:[~2018-07-11 8:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-11 7:56 [PATCH v3 1/1] mmc: sdhci-pci-dwc-mshc: synopsys dwc mshc support Prabu Thangamuthu
2018-07-11 8:40 ` Adrian Hunter [this message]
2018-07-11 13:03 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fa16865b-9a23-d833-cad8-ce8ece660343@intel.com \
--to=adrian.hunter@intel.com \
--cc=Manjunath.MB@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=prabu.t@synopsys.com \
--cc=prabuchml@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox