Re: [PATCH] mmc: dw_mmc: Fix DDR mode support.

[Chris Ball <cjb@laptop.org>]

Hi,

On Thu, Aug 04 2011, Seungwon Jeon wrote:
> Host driver can't get a hint of DDR mode through ios->ddr flag anymore.
> ios->timing is currently used to inform DDR mode as a substitute.
> And capability of MMC_CAP_MMC_HIGHSPEED is added for DDR support.
>
> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
> ---
>  drivers/mmc/host/dw_mmc.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index d65511e..b412a1d 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -699,7 +699,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	}
>  
>  	/* DDR mode set */
> -	if (ios->ddr) {
> +	if (ios->timing == MMC_TIMING_UHS_DDR50) {
>  		regs = mci_readl(slot->host, UHS_REG);
>  		regs |= (0x1 << slot->id) << 16;
>  		mci_writel(slot->host, UHS_REG, regs);
> @@ -1646,7 +1646,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  			mmc->caps |= MMC_CAP_4_BIT_DATA;
>  
>  	if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED)
> -		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
> +		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
>  
>  #ifdef CONFIG_MMC_DW_IDMAC
>  	mmc->max_segs = host->ring_size;

Thanks, pushed to mmc-next for 3.1 with Will's ACK.

- Chris.
-- 
Chris Ball   <cjb@laptop.org>   <http://printf.net/>
One Laptop Per Child