From: Chris Ball <cjb@laptop.org>
To: Jaehoon Chung <jh80.chung@samsung.com>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
Kyungmin Park <kyungmin.park@samsung.com>
Subject: Re: [RFC] mmc_test: how use mmc_test on only eMMC board
Date: Thu, 19 May 2011 10:58:29 -0400 [thread overview]
Message-ID: <m3vcx6d9ey.fsf@pullcord.laptop.org> (raw)
In-Reply-To: <4DD4A23F.10400@samsung.com> (Jaehoon Chung's message of "Thu, 19 May 2011 13:53:19 +0900")
Hi,
On Thu, May 19 2011, Jaehoon Chung wrote:
> Hi mailing..
>
> I want to know how use mmc_test..
>
> In my case, i used only eMMC board.
> So i didn't use unbind/bind for mmc_test.
>
> echo mmc0:0001 > /sys/bus/mmc/drivers/mmcblk/unbind
> then rootfs of my board has be broken
mmc_test destroys the data on the card being tested, so there is no way
to use it on your active rootfs.
You would have to boot from external SD (or USB, or network, or
something else) in order to run it on your internal eMMC. If you do
this, first make sure your eMMC doesn't contain any data needed to boot
your system far enough to be able to boot a kernel from another device.
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
next prev parent reply other threads:[~2011-05-19 14:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-19 4:53 [RFC] mmc_test: how use mmc_test on only eMMC board Jaehoon Chung
2011-05-19 14:58 ` Chris Ball [this message]
2011-05-20 1:39 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3vcx6d9ey.fsf@pullcord.laptop.org \
--to=cjb@laptop.org \
--cc=jh80.chung@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox