From: Julian Sikorski <belegdol@gmail.com>
To: linux-mmc@vger.kernel.org
Subject: nothing happens upon SD card insertion (Asus Zenbook UM425IA, RTS522A)
Date: Sat, 25 Dec 2021 11:45:57 +0100 [thread overview]
Message-ID: <sq6sp6$cs9$1@ciao.gmane.io> (raw)
Hello,
I have an Asus Zenbook UM425IA laptop with Realtek RTS522A card reader:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A
PCI Express Card Reader (rev 01)
Almost every time when I insert a card into it, nothing happens - no
dmesg message or anything.
echo 1 | sudo tee -a /sys/kernel/debug/tracing/events/mmc/enable
sudo cat /sys/kernel/debug/tracing/trace_pipe > mmc_trace.txt
also results in an empty file. If I am lucky, the card will be detected
after some delay and the following will appear in the log:
Dez 25 11:34:41 snowball3 kernel: mmc0: cannot verify signal voltage switch
Dez 25 11:34:41 snowball3 kernel: mmc0: new ultra high speed SDR50 SDHC
card at address aaaa
Dez 25 11:34:41 snowball3 kernel: mmcblk0: mmc0:aaaa SL32G 29.7 GiB
Dez 25 11:34:41 snowball3 kernel: mmcblk0: p1
How can I investigate this further? As things stand now, the reader is
almost unusable. I am using 5.15.11-200.s0ix01.fc35.x86_64 kernel. Thank
you in advance.
Best regards,
Julian
next reply other threads:[~2021-12-25 10:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-25 10:45 Julian Sikorski [this message]
2021-12-28 17:06 ` nothing happens upon SD card insertion (Asus Zenbook UM425IA, RTS522A) Ulf Hansson
2021-12-29 3:36 ` Ricky WU
2021-12-29 8:48 ` Julian Sikorski
[not found] ` <56424bcaea61409ead3075702b92bca1@realtek.com>
2021-12-30 9:25 ` Julian Sikorski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='sq6sp6$cs9$1@ciao.gmane.io' \
--to=belegdol@gmail.com \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox