From: Aaron Tomlin <atomlin@redhat.com>
To: mcgrof@kernel.org, rostedt@goodmis.org
Cc: cl@linux.com, pmladek@suse.com, mbenes@suse.cz,
christophe.leroy@csgroup.eu, akpm@linux-foundation.org,
linux-kernel@vger.kernel.org, linux-modules@vger.kernel.org,
atomlin@atomlin.com, ghalat@redhat.com, oleksandr@natalenko.name,
neelx@redhat.com, daniel.thompson@linaro.org, hch@infradead.org,
tglx@linutronix.de, linux-rt-users@vger.kernel.org
Subject: [PATCH] module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RT
Date: Sun, 3 Jul 2022 13:31:09 +0100 [thread overview]
Message-ID: <20220703123109.3770204-1-atomlin@redhat.com> (raw)
Looking at add_kallsyms(), there is absolutely no need to explicitly
disable preemption. Before kallsyms-specific data is prepared/or set-up, we
ensure that the unformed module is known to be unique i.e. does not already
exist (see load_module()). Therefore, we can use the common RCU primitive
as this section of code can be pre-empted. In other words, it is safe to be
re-scheduled, in this context.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: 08126db5ff73 ("module: kallsyms: Fix suspicious rcu usage")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
---
kernel/module/kallsyms.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/kernel/module/kallsyms.c b/kernel/module/kallsyms.c
index 3e11523bc6f6..b16ff36b4b71 100644
--- a/kernel/module/kallsyms.c
+++ b/kernel/module/kallsyms.c
@@ -174,14 +174,14 @@ void add_kallsyms(struct module *mod, const struct load_info *info)
mod->kallsyms = (void __rcu *)mod->init_layout.base +
info->mod_kallsyms_init_off;
- preempt_disable();
+ rcu_read_lock();
/* The following is safe since this pointer cannot change */
- rcu_dereference_sched(mod->kallsyms)->symtab = (void *)symsec->sh_addr;
- rcu_dereference_sched(mod->kallsyms)->num_symtab = symsec->sh_size / sizeof(Elf_Sym);
+ rcu_dereference(mod->kallsyms)->symtab = (void *)symsec->sh_addr;
+ rcu_dereference(mod->kallsyms)->num_symtab = symsec->sh_size / sizeof(Elf_Sym);
/* Make sure we get permanent strtab: don't use info->strtab. */
- rcu_dereference_sched(mod->kallsyms)->strtab =
+ rcu_dereference(mod->kallsyms)->strtab =
(void *)info->sechdrs[info->index.str].sh_addr;
- rcu_dereference_sched(mod->kallsyms)->typetab = mod->init_layout.base + info->init_typeoffs;
+ rcu_dereference(mod->kallsyms)->typetab = mod->init_layout.base + info->init_typeoffs;
/*
* Now populate the cut down core kallsyms for after init
@@ -190,22 +190,22 @@ void add_kallsyms(struct module *mod, const struct load_info *info)
mod->core_kallsyms.symtab = dst = mod->data_layout.base + info->symoffs;
mod->core_kallsyms.strtab = s = mod->data_layout.base + info->stroffs;
mod->core_kallsyms.typetab = mod->data_layout.base + info->core_typeoffs;
- src = rcu_dereference_sched(mod->kallsyms)->symtab;
- for (ndst = i = 0; i < rcu_dereference_sched(mod->kallsyms)->num_symtab; i++) {
- rcu_dereference_sched(mod->kallsyms)->typetab[i] = elf_type(src + i, info);
+ src = rcu_dereference(mod->kallsyms)->symtab;
+ for (ndst = i = 0; i < rcu_dereference(mod->kallsyms)->num_symtab; i++) {
+ rcu_dereference(mod->kallsyms)->typetab[i] = elf_type(src + i, info);
if (i == 0 || is_livepatch_module(mod) ||
is_core_symbol(src + i, info->sechdrs, info->hdr->e_shnum,
info->index.pcpu)) {
mod->core_kallsyms.typetab[ndst] =
- rcu_dereference_sched(mod->kallsyms)->typetab[i];
+ rcu_dereference(mod->kallsyms)->typetab[i];
dst[ndst] = src[i];
dst[ndst++].st_name = s - mod->core_kallsyms.strtab;
s += strscpy(s,
- &rcu_dereference_sched(mod->kallsyms)->strtab[src[i].st_name],
+ &rcu_dereference(mod->kallsyms)->strtab[src[i].st_name],
KSYM_NAME_LEN) + 1;
}
}
- preempt_enable();
+ rcu_read_unlock();
mod->core_kallsyms.num_symtab = ndst;
}
--
2.34.3
next reply other threads:[~2022-07-03 12:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-03 12:31 Aaron Tomlin [this message]
[not found] ` <CAB=NE6VYhoXbS2TYN_+TP1P+C5kbnNBNr2vr8V9Fs2dvm6NL5g@mail.gmail.com>
2022-07-04 15:02 ` [PATCH] module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RT Aaron Tomlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220703123109.3770204-1-atomlin@redhat.com \
--to=atomlin@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=atomlin@atomlin.com \
--cc=christophe.leroy@csgroup.eu \
--cc=cl@linux.com \
--cc=daniel.thompson@linaro.org \
--cc=ghalat@redhat.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-modules@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
--cc=mbenes@suse.cz \
--cc=mcgrof@kernel.org \
--cc=neelx@redhat.com \
--cc=oleksandr@natalenko.name \
--cc=pmladek@suse.com \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).